Multi-Tech Systems, Inc. makes no representations or warranties, whether express, implied or by estoppels, with respect to the content, information,
material and recommendations herein and specifically disclaims any implied warranties of merchantability, fitness for any particular purpose and noninfringement.
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of
Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Legal Notices
The MultiTech products are not designed, manufactured or intended for use, and should not be used, or sold or re-sold for use, in connection with
applications requiring fail-safe performance or in applications where the failure of the products would reasonably be expected to result in personal injury or
death, significant property damage, or serious physical or environmental damage. Examples of such use include life support machines or other life
preserving medical devices or systems, air traffic control or aircraft navigation or communications systems, control equipment for nuclear facilities, or
missile, nuclear, biological or chemical weapons or other military applications (“Restricted Applications”). Use of the products in such Restricted
Applications is at the user’s sole risk and liability.
MULTITECH DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A CELLULAR COMMUNICATIONS NETWORK WILL BE
UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, NOR DOES MULTITECH WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY CELLULAR
COMMUNICATIONS NETWORK. MULTITECH WILL HAVE NO LIABILITY FOR ANY LOSSES, DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES,
COSTS OR EXPENSES (INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY INABILITY TO ACCESS A CELLULAR
COMMUNICATIONS NETWORK USING THE PRODUCTS.
Trademarks and Registered Trademarks
MultiTech, the MultiTech logo, DeviceHQ, xDot, and MultiConnect and Conduit are registered trademarks and mPower mCard and mDot are trademarks of
Multi-Tech Systems, Inc. All other products and technologies are the trademarks or registered trademarks of their respective holders.
Contacting MultiTech
Knowledge Base
The Knowledge Base provides immediate access to support information and resolutions for all MultiTech products. Visit http://www.multitech.com/kb.go.
Support Portal
To create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com.
About MultiConnect rCell 100 Series Router ................................................................................................................ 5
Descriptions of LEDs...................................................................................................................................................... 7
Ethernet LED Descriptions ............................................................................................................................................ 7
Side Panel Connectors .................................................................................................................................................. 9
For Quectel EG95 (LEU7)........................................................................................................................................... 11
Power Draw................................................................................................................................................................. 12
User Responsibility...................................................................................................................................................... 13
Power Supply Caution ................................................................................................................................................. 13
Radio Frequency (RF) Safety ....................................................................................................................................... 14
Interference with Pacemakers and Other Medical Devices ...................................................................................... 14
Chapter 4 – Installing the Device............................................................................................................................ 17
Installing the Device .................................................................................................................................................... 17
Mounting the Device................................................................................................................................................... 17
Installing the SIM Card................................................................................................................................................ 17
Resetting the Device ................................................................................................................................................... 18
Restoring User Defined Settings to the Device .......................................................................................................... 19
Registration of Substances........................................................................................................................................ 21
MultiConnect®rCell 100 Series Router LTE Cat 4 MTR-LEU7 Hardware Guide3
CONTENTS
Waste Electrical and Electronic Equipment Statement .............................................................................................. 21
Instructions for Disposal of WEEE by Users in the European Union ........................................................................ 21
Information on HS/TS Substances According to Chinese Standards ......................................................................... 22
Information on HS/TS Substances According to Chinese Standards (in Chinese) ...................................................... 23
4MultiConnect®rCell 100 Series Router LTE Cat 4 MTR-LEU7 Hardware Guide
PRODUCT OVERVIEW
Chapter 1 – Product Overview
About MultiConnect rCell 100 Series Router
This guide describes the MultiConnect rCell 100 Series Router. Use this product to provide secure data
communication between many types of devices that use legacy and the latest communication technologies. The
device has an integrated cellular modem and includes 10/100 BaseT Ethernet and RS-232 serial connectivity.
Documentation
The following documentation is available at http://www.multitech.com/brands/multiconnect-rcell-100-series.
DocumentDescriptionPart Number
Hardware GuideThis document provides overview, safety and regulatory
information, design considerations, schematics, and general
hardware information.
Software GuideThis document provides instructions and information on how
to properly configure your device through its user interface.
API Developer GuideYou can use the rCell API to manage configurations, poll
statistics, and issue commands. Documentation is available on
the MultiTech Developer Resources website at:
Quectel EG9x AT Commands
Manual, USB Installation
Guides, and other related
manuals
Multiple documents listing AT Commands, USB installation
guides, and other protocols used to communicate with your
LEU7 device. Provided in a zip file.
S000743
S000720
N/A
N/A
MultiConnect®rCell 100 Series Router LTE Cat 4 MTR-LEU7 Hardware Guide5
PRODUCT OVERVIEW
Dimensions
6MultiConnect®rCell 100 Series Router LTE Cat 4 MTR-LEU7 Hardware Guide
PRODUCT OVERVIEW
Descriptions of LEDs
The top panel contains the following LEDs:
Power and Status LEDs—The Power LED indicates that DC power is present and the Status LED blinks when
the unit is functioning normally.
Wi-Fi—Indicates if the device is serving as a Wi-Fi access point or acting as a Wi-Fi client. Not all models
support Wi-Fi.
Modem LEDs—Two modem LEDs indicate carrier detection and link status.
Signal LEDs—Three signal LEDs display the signal strength level of the wireless connection.
Ethernet LEDs—These LEDs are not on the top panel. See the section Ethernet LED Descriptions for
descriptions of these LEDs.
LED Indicators
POWERIndicates presence of DC power when lit.
STATUSThe LED is a solid light when the device is booting up, saving the configuration, restarting,
or updating the firmware. When the Status LED begins to blink, the device is ready for use.
Wi-FiInfrastructure mode:
The Wi-Fi LED is lit when Wi-Fi AP mode is enabled, unlit when disabled.
The LED flashes rapidly to indicate traffic.
Client mode:
The Wi-Fi LED is lit when Wi-Fi client mode is enabled.
The Wi-Fi LED blinks slowly when associated with an Access Point.
The Wi-Fi LED flashes rapidly to indicate traffic.
CDCarrier Detect. When lit, indicates data connection has been established.
LSLink Status
OFF —No power to the cellular radio
Continuously Lit — Transmitting or receiving
Slow Blink (-0.2Hz) — Registered or connected
LED Fast Blink (-3Hz) — Not registered or searching for connection
SIGNALSignal strength for cellular (RSSI range: 0 - 31)
ALL OFF — Unit is off, not registered on network, or extremely weak signal (0 <= RSSI <
6).
1 Bar “ON” — Very weak signal (7 <= RSSI <14).
1 Bar and 2 Bar “ON” — Weak signal (15 <= RSSI <23).
1 Bar, 2 Bar, and 3 Bar “ON” — Good signal (24 <= RSSI >= 31).
Ethernet LED Descriptions
Two Ethernet LEDs are physically on the RJ-45 connector(s). The table that follows describes these LEDs.
MultiConnect®rCell 100 Series Router LTE Cat 4 MTR-LEU7 Hardware Guide7
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.