MultiModem ZBA Quick Start Guide
Multi-Tech Systems, Inc. 3
Introduction
This guide shows you how to set up your MultiModem ZBA. For detailed
information, product specifications, troubleshooting tips, and more, see
the User Guide, available on your MultiModem Product CD.
Check Multi-Tech’s Web site for current versions of our product
documentation.
Safety Warnings
• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or
larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is
specifically designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone during an electrical storm; there is a risk of
electrical shock from lightning.
• Do not use a telephone in the vicinity of a gas leak.
• The telephone cord is to be disconnected before accessing the
inside of the equipment.
Package Contents
• One MultiModem ZBA
• One set of four self-adhesive plastic feet
• One 50/60Hz universal power supply
• One 9-pin to 25-pin serial cable
• One RJ11 telephone cable
• One printed Quick Start Guide
• One product CD