Multitech CallFinder CF100FX2 Configuration Manual

CallFinder® CDMA & GSM

Cellular Gateways

Configuration Guide for

Inter-Operation between

CallFinder Cellular Gateways and

AltiGen IP Phone System

CallFinder Configuration Guide: AltiGen IP Phone System

CallFinder CF100FX2 Configuration Guide
Inter-Operation with AltiGen IP Phone System
PN S000449A, Version A

Copyright

This publication may not be reproduced, in whole or in part, without prior expressed written permission from
Multi-Tech Systems, Inc. All rights reserv ed.

Copyright © 2007, by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes. Check Multi-Tech’s Web site for current versions of our product
documentation

Revisions

Revision Level Date Description

A 11/05/07 Initial release.

Trademarks

CallFinder, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech Systems, Inc.
Microsoft, Windows 2000, 2003, and XP are registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.

Patents

This Product is covered by one or more of the following U.S. Patent Numbers: 6151333, 5757801, 5682386,

5.301.274; 5.309.562; 5.355.365; 5.355.653; 5.452.289; 5.453.986. Other Patents Pending.

World Headquarters

Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
Phone: [phone] or 800-328-9717
Fax: [phone]

Technical Support

Country By Email By Phone

Europe, Middle East, Africa: [e-mail] +(44) 118 959 7774
U.S., Canada, all others: [e-mail] [phone] or [phone]

Internet Address: http://www.multitech.com

2

CallFinder Configuration Guide: AltiGen IP Phone System

Introduction

Multi-Tech CallFinder® Cellular Gateway is an ideal solution for

• Reducing cellular telecom costs

• Cellular wireless communication backup

• Primary voice network for remote locations or temporary work sites

The gateway is connected to an analog trunk port on the AltiGen IP phone system. The user simply dials the
desired cell phone number and the phone system’s routing table will hand off the call to the port connected to the
CallFinder. From there, the CallFinder will route the call over the wireless network.

The CallFinder also provides an affordable back-up communication network during times of emergency. In the
case of a PSTN failure, it will bridge the AltiGen IP phone system to the cellular network providing an alternate
route. In a disaster situation, it will even establish critical communication, including emergency 911 servi ce .

In addition, the CallFinder gateway provides a fast, easy fixed line alternative for small offices, SOHO environments
or other remote locations. Simply connect an analog phone to the gateway and the user can make affordable
cellular calls over the GSM network. There is no need for fixed wiring, making it an ideal solution to any
environment where a fixed line is not readily available, such as mobile centers or retail kiosks.

Network Topology

There are two models of CallFinder Cellular Gateways:

1. GSM Model – CF100FX2-G

2. CDMA Model – CF100FX2-C

The focus of this document is to provide set-up and configuration instructions to support a MobileExt call from
AltiServ to a cellular phone network.

Physical Topology

Requirements

AltiServ:

Software – AltiWare 5.1 Update1 and AltiWare 5.0A with Update 4 or above. AltiWare 5.1 support dynamic
trunk sharing for MobileExt operation while AltiWare 5.0A requires dedicated trunk channels to support MobileExt.

Hardware – Triton or MAX1000 analog trunk port for Multi-Tech CF100FX2-G (GSM one port) and CF100FX2-C
(CDMA one port)

CallFinder:

Software – CallFinder Version 3.00 for GSM and 2.06 for CDMA

3