TOP of UNIT
When aaching unit to wall put safety bracket in
middle of unit with 16 Pan head screw then 25mm
Pan head screw into wall.
For plasterboard without a stud it is recommended
to use a plug with screw (not provided).
ASSEMBLY INSTRUCTION FOR MAXI ULTRA-315C
2 x GABLES
1 x BACKING BOARD
FOLD LINE
3 x FIXED SHELF
1 x SAFETY BRACKET
1 x ADJUSTABLE
SHELF
PARTS IDENTIFICATION LIST
NO MODEL DESCRIPTION QTY
1 CONFIRMAT SCREWS 14
2 WHITE CAPS 14
3 SUPPORT PINS 4
4 BACKING NAILS 40
NO MODEL DESCRIPTION QTY
5 16 PAN HEAD SCREWS 1
6 25mm PAN HEAD SCREWS 1
7 “L” SAFETY BRACKET 1
1 x BOTTOM KICK
A
F
G
B
C ,D & E
H
INFILL
YOU WILL NEED TO RETRIEVE THE INFILL FROM PART 2,
USING 3 X 30mm SCREWS PROVIDED, ATTACH THE INFILL
TO THE UNDER-SIDE OF THE CAM SHELF BEFORE PUTTING
YOUR SHELF INTO PLACE.
UNIT ASSEMBLY
Shelf Supports
RUNNER POSITIONING
MAXI ULTRA SERIES
Models Hole Positions
Maxi Ultra H1 1
Maxi Ultra HS2 1 - 6
Maxi Ultra H2 1 - 6
Maxi Ultra 450 1- 6 -11 -16
Maxi Ultra 315C 1-8 -13 -18
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entled to a
replacement of refund for major failure.
10 Year Warranty
• If the purchaser has a fault or defect with this product, the purchaser needs to contact Mulstore Industries
(Aust) directly on (07) 3208 6799 and state date of purchase, place of purchase and proof of purchase.
• Mulstore Industries (Aust) will replace any faulty or defect parts at no cost to the customer. A replacement
will be sent to you as soon as possible, or product can be exchanged at the store of purchase.
• This warranty is in addion to other rights and remedies of the customer under law.
Sincerely,
Mulstore Industries (Aust) Management
Loading...