MULTISPAN UTR - 1044, UTR - 2044, UTR - 444 Operating Manual
OPERATING MANUAL
UNIVERSAL TIMER
UTR - 1044/2044/444
OPERATING MANUAL
UNIVERSAL TIMER
UTR - 1044/2044/444
Technical Specification
Notes:
1). For safely purpose, key function are designed in such a way that operator will not go into
detailed parmeter setting (Previously Set) function. In this situation, in LOCK parameter,
has to be selected. If previously set parameters are to be changed, then any operator
has to select
2). In Cycling Mode, parameter will be displayed.
3). POWER ON () : Timer starts counting as soon as it gets power supply.
4). By default ON delay Mode is provided. Please refer programming guide to change to OFF
delay or Cycling Mode.
1). Turn ON instrument. SET time according to your requirment.
2). In running mode, upper display indicates current TIME value and lower display shows SET
time value. Relay ON or OFF controls depends on set time.
3). Relay operation is according to selection of Delay ON or Delay OFF in programming menu.
4). In cycling mode, relay will turn on for ON time (time-1) & relay will turn off for OFF time
(time-2) and this ON-OFF process will continue.
5). To reset the time, press Reset Key.
YES
NO
UNT- UNT TIME MEMO1, -2 &
Working
Page - 1
www.multispanindia.com
1) Display : a) Upper : 4 digit, 0.56’’, 7 segment LED
b) Lower : 4 digit, 0.4’’, 7 segment LED
2) Output : 1 relay, 2 C/O, 230V AC, 5 Amp.
3) Supply : 110V to 250V AC, 50 Hz smps
96 X 96 X 50 mm
72 X 72 X 60 mm
48 X 48 X 90 mm
UTR - 1044
UTR - 444
R1
R2
Universal Timer
UTR-1044
TIME
SET TIME
1 2 3 4
1 2 3 4
UTR - 2044
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Page - 2
www.multispanindia.com
PARAMETER MODE
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press key
SET
ENT
press SET/ENT key
press SET/ENT key
press SET/ENT key
Lock Mode : yes / no
L O C KL O C K
Y E S N O
F U N C
D L O F
D L O N
C Y O F
C Y O N
N O C L
SELECT BY
key
SELECT BY
SELECT BY
key
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
SELECT BY
key
Select:
Cycling Mode
delayed ON or
delayed OFF or
9 999 SEC.9 999 SEC.
9 999 SEC.9 999 SEC.
9 999 SEC.9 999 SEC.
99 9 min SEC..599 9 min SEC..5
99 9 min SEC..599 9 min SEC..5
99 9 min SEC..599 9 min SEC..5
99 9 hr min..599 9 hr min..5
99 9 hr min..599 9 hr min..5
99 9 hr min..599 9 hr min..5
999 9 min.999 9 min.
999 9 min.999 9 min.
999 9 min.999 9 min.
999 9 hr.999 9 hr.
999 9 hr.999 9 hr.
999 9 hr.999 9 hr.
9999 hr
9999 hr
9999 hr
999 9 SEC.999 9 SEC.
999 9 SEC.999 9 SEC.
999 9 SEC.999 9 SEC.
9999 SEC
9999 SEC
9999 SEC
9999 MIN
9999 MIN
9999 min
select by key
select by key
select by key
U N T 1U N T 1
p u L s
U N T 2
M I NM I N
T r G
M I N
M I NM I N
M I N
M I N
M I N
M I N
H RH R
E n B L
H R
H R
H R
H R
S E CS E C
P O O N
S E C
S E C
S E C
S E C
Time-1 select:
Time-2 select: Sec, Min, Hr
Sec, Min, Hour
T I M E
U P
D n
Memory Retain (yes / no)
Memory Retain (yes / no)
T I M E
M E M O
M E M O
U P
Y E S
Y E S
D n
N O
N O
1 2 3 4
1 2 3 4
Process Value
Set Value
T I M 1
1 2 3 4
Delay time (time-1)
T I M 1
1 2 3 4
Cycle ON time (time-1)
Cycle OFF time (time-2)
SELECTED BY
KEY
SELECTED BY
SELECTED BY
KEY
KEY
SELECTED BY
KEY
SELECTED BY
SELECTED BY
SELECTED BY
KEY
KEY
KEY
SELECTED BY
KEY
SELECTED BY
KEY
press key to
set cycle ON time
press key to
set cycle OFF time
press key to
set cycle Delay time
T I M 2
1 2 3 4
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
press SET/ENT key
If Delayed ON/ Delayed OFF is selected
If Delayed ON/ Delayed OFF is selected
If Cycling Mode is selected
If Cycling Mode is selected
press
SET/ENT
key
press
SET/ENT
key
Time Count : UP/Down
Time Count : UP/Down
OFF Starting
ON Starting
No. of Repeat
Cycle
Loading...