MULTISPAN TC-19 Operating Manual

Technical Specification
1) MODEL : TC - 19 (Temperature Controller).
2)
3) Input : J ,K (factory set)
4)
Display : 4 digit, single display, 7 segment LED.
Range : J type : 0 - 400 C / 0 - 600 C (factory set).
k type : 0 - 1200 C.
°
OPERATING MANUAL
TEMPERATURE CONTROLLER TC-19
Model : TC - 19 - J,K
(96 X 96 mm)
5) Relay status : LED indication for relay status.
6) Controlling action : TP/ON-OFF
7) Output : 1 relay, 230V AC, 5A
8) Power Supply : 110V TO 250V AC,
50/60Hz (SMPS).
CONNECTION DIAGRAM
POWER ON
display for 2 sec
Process Value
display for 2 sec, according
display for 2 sec
to the input sensor programmed.
8888...
t C j
T P
5 0
Note :
1) Press key continuously along with or key to set the SETPOINT.
2) The
3)
5) On normal powering instrument, below given display appears,
set value is saved by releasing the key during setting procedure.
To show the SETPOINT, press key momentarily.
4) Auto out time is 15 SEC. without saving.
SET POINT SETTING
process value
process value
on releasing SET key will store the latest set value
5 0
2 0 0
5 0
press + key to set SET point
www.multispanindia.com
Page - 1
H
TC -19
Temperature Controller
SET
ºC
01 2 3
NCCNO
NL
-
+
Supply:
230 V AC
T/C
Press Set key to save & exit
Press Set key to save & exit
Password Message
Password Message
Ask to company person
Input ( J/K)
OFF-SET
Control Action
TP
ON-OFF
Press Set key to save & exit
Press Set key to save & exit
PasS
0 0 3 7
P b
0 0 0 5
C T
0 0 0 8
M R
0 0 0 0
H y s t
0 0 0 3
Password Message
IF TP SELECTED
Proportional
Band
Cycle Time
Manual
Reset
IF ON-OFF SELECTED
Hysteresis
USER CONFIGURATION
OFFSET SETTING
CONTROL PARAMETER
P a s S
P a s S
I N P T
O F S T
C T R L
0 0 7 3
0 0 0 0
/
/
J
0 0 0 0
T P
O N 0 F
h
Product improvement and upgrade is a constant procedure. So for more updated operating information and support, please contact our Helpline : 079 - 22770865 / 3797 or Email at marketing@multispanindia.com
www.multispanindia.com
Page - 2
SENSOR BREAK / OPEN MESSAGE
‘Open’ message display when the Sensor is not properly connected or breakdown.
O P e n
*
Loading...