Multiplex Technology 5625, 5615, 5645 User Manual
Warranty
600-125 rev A
Multiplex Technology, Inc., Brea, CA 92821
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one year from the date of purchase or MTI will repair, or at its
option, replace the defective product. To obtain warranty
service, call MTI for a return material authorization (RMA)
number and return the product prepaid to Multiplex
Technology, Inc., 3001 Enterprise Street, Brea, CA 92821,
Attention: Customer Service. Please put the RMA number
on the outsideof the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or expenses,
whether direct, consequential or incidental arising from the
use of or the inability to use this product. Some states do not
allow limitations on how long the implied warranty lasts or
the exclusion or limitation or incidental or consequential
damages, so the above limitations and exclusions may not
apply to you. This warranty gives you specific legal rights,
and you may have other rights which may vary from state to
state.
Channel
PERFORMANCE MULTI-ROOM VIDEO
Modulator
Installation Manual
®
select
C
D
BA
program
Frequency-Agile
MTS Stereo
Multi-channel Modulators
model 5645 quad mts stereo surround sound modulator
STEREO
dbx noise reduction
Models
R
600-125 rev A
Multiplex Technology, Inc., Brea, CA 92821
5615/5625/5645
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this device
without the permission of Multiplex Technology, Inc. may
void the user's authority to operate this equipment.
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
The ChannelPlus 5600 Series are digitally-tuned video modulators that convert any
baseband video and audio signal to a user-selected UHF, or Ultraband CATV. An
internal quartz crystal reference oscillator and PLL circuitry ensure drift-free
performance. The user selects the output frequency (channel) using the "select"
button to choose which modulator and the "program" button to enter the number of
the desired channel. Any TV connected to the output via coax can receive the
signals, when theTV is tuned tothe proper channel.
In addition, the 5600 series encodes each channel using the MTS stereo standard.
Stereo sound and surround sound information will be received by any MTS
compatible television receiver.
Models available:
5615 1 channel modulator
5625 2 channel modulator
5645 4 channel modulator
Changing modulation standards
Cable HRC andIRC considerations
Most cable services use IRC frequency assignments. This is the default for
the ChannelPlus modulators. However, if the cable service
uses HRC or the TV appears to search for the "house channels," the
modulator can be reprogrammed to use HRC assignments by entering the
number “ 98”. Set to IRC by entering a “99”. Both of these settings are only
used for setting HRC/IRC. : This setting can be entered on any
modulator channel, A, B, C, or D, and affects all channel assignments for
that unit. Cable channels must eitherbe IRC or HRC.
Mounting hole template
5600 series
Note
all all
To hang with connectors on the side
To hang with connectors on the bottom or top
Controls and Connections - Model 5645 shown
®
select
DCBA
Modulator LEDs show which
Option:
To connect the video and audio to a local monitor, use RCA type ‘Y’ adaptors and
remove the ’LOOP’ jumper for this channel.
The model 5615 has built in loop through connectors, so it does not require the
use of ‘Y’ adaptors.
model 5645 quad MTS stereo surround sound modulator
program
Program button enters
the channel number
Select button chooses
the modulator.
(5625 & 5645)
modulator is selected
STEREO
pll frequency control
OUTPUT
POWER
15VDC
600mA
CH D
CH C
VIDEO AUDIO L AUDIO R
RF output
Power supply
15VDC 600mA (5615 & 5625)
15VDC 900mA (5645 only)
Video inputs
Audio inputs: Right and Left
Terminating jumpers (remove for hi-Z)
VIDEO AUDIO LAUDIO R
CH B
CH A
VIDEO AUDIO L AUDIO R
C
ADB
ABCD
Removejumper for Hi-Z
(Seemanual)
Specifications: typical @ 25 C ± 5 C
OO
5600 Series modulators
Inputs
Video
performance
RF output
Power supply
Physical
MTS audio
performance
video
audio
differential gain
differential phase
signal/noise 55 dB
channel ranges
output level
IM distortion
alternate channel
model number
output current
600mA 600mA 900mA
output voltage
input power
power consumption
7 watts
height 3.8 cm (1.5 in)
width 20.0 cm (7.9 in)
depth 14.1 cm (5.5 in)
weight 1.19 kg (2 lbs 10 oz)
frequency range
signal/noise
separation
surround sound
noise reduction
1Vp-p@75
1 V rms @ 47k
UHF
14-64
+25 dBmV (85dBuV)
-45dBC @ 12MHz
105-125 VAC
20Hz - 12kHz
25 dB @ 1000Hz
Compatible with
Dolby full logic surround sound
Certified dbx
4%
<4º
(excluding 95-99)
-60 dBC
15 VDC
9 watts
65 dB
CATVstandard
65-125
564556255615
11 watts
2
7
Loading...