Multiplex Technology 4CH, 8CH, 16CH User Manual

4CH

16CH / 8CH / 4CH

150

16CH / 8CH / 4CH Built--

16CH / 8CH / 4CH Built

in DVD--

in DVD

RW Writer or CD--

RW Writer or CD

RW Writer

User’’

User

Please read instructions thoroughly before operation and retain it for future reference.

s Manual

MPEG4 DVR SERIES_V0.989

IMPORTANT SAFEGUARD

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION:

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from the type of power source indicated on the label.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CE Mark

This apparatus is manufactured to comply with the radio interference requirements.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLI O LI CENS E FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VID EO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPE G LA, LLC. SEE HTTP://WWW.MPEGLA.COM

Note: Version: 1042-09-H6-04-AA-08 ; 0030

Note: Any changes of AP, please refer to your distributor.

Note: Any changes of this manual made to the actual product are subjects to no further notification.

TABLE OF CONTENTS

PARTS AND FEATURES

1.1 FEATURES -------------------------------------------------------------------------------------------------------------------------

1.2 PACKAGE CONTENTS ---------------------------------------------------------------------------------------------------------

1.3 SPECIFICATION ------------------------------------------------------------------------------------------------------------------

1.4 FRONT PANEL --------------------------------------------------------------------------------------------------------------------

1.5 REAR PANEL ----------------------------------------------------------------------------------------------------------------------

GETTING STARTED

2.1 GETTING STARTED -------------------------------------------------------------------------------------------------------------

BASIC OPERATION

3.1 RECORDING -----------------------------------------------------------------------------------------------------------------------

3.2 PLAYBACK -------------------------------------------------------------------------------------------------------------------------

DETAILED MENU CONFIGURATION

4.1 MENU TREE ----------------------------------------------------------------------------------------------------------------------

4.2 MAIN MENU OPTIONS_ RECORD -----------------------------------------------------------------------------------------

4.3 MAIN MENU OPTIONS_ TIMER --------------------------------------------------------------------------------------------

4.4 MAIN MENU OPTIONS_ DATE ---------------------------------------------------------------------------------------------

4.5 MAIN MENU OPTIONS_ ADVANCE ---------------------------------------------------------------------------------------

4.6 ADVANCE MENU_ CAMERA ------------------------------------------------------------------------------------------------

4.7 ADVANCE MENU_ DETECTION -------------------------------------------------------------------------------------------

4.8 ADVANCE MENU_ DISPLAY ------------------------------------------------------------------------------------------------

4.9 ADVANCE MENU_ ALERT -----------------------------------------------------------------------------------------------------

4.10 ADVANCE MENU_ REMOTE ------------------------------------------------------------------------------------------------

4.11 ADVANCE MENU_ SYSTEM -------------------------------------------------------------------------------------------------

4.12 ADVANCE MENU_ NETWORK ---------------------------------------------------------------------------------------------

4.13 ADVANCE MENU_ BACKUP ------------------------------------------------------------------------------------------------

4.14 ADVANCE MENU_ HDD INFO ----------------------------------------------------------------------------------------------

4.15 ADVANCE MENU_ EVENT LOG -------------------------------------------------------------------------------------------

1 1 2 4 8

11 12

14 15 16 17 18 18 19 21 22 23 24 25 26 28 28

ADDITIONAL OPERATION

5.1 SEARCH -----------------------------------------------------------------------------------------------------------------------------

5.2 2X DIGITAL ZOOM ---------------------------------------------------------------------------------------------------------------

5.3 KEY LOCK --------------------------------------------------------------------------------------------------------------------------

5.4 SWITCH THE N/P SYSTEM ----------------------------------------------------------------------------------------------------

5.5 USB UPGRADE--------------------------------------------------------------------------------------------------------------------

5.6 LICENSED SOFTWARE AP----------------------------------------------------------------------------------------------------

5.7 CONNECT TO AP VIA IE BROWSER ---------------------------------------------------------------------------------------

5.8 GPRS ---------------------------------------------------------------------------------------------------------------------------------

5.9 OPTIONAL PHERIPHERALS --------------------------------------------------------------------------------------------------

TROUBLE SHOOTING

6.1 FAQ -----------------------------------------------------------------------------------------------------------------------------------

AP BASIC OPERATION --------------------------------------------------------------------------------------------------AP ADVANCED SETTING -------------------------------------------------------------------------------------------------

Network -----------------------------------------------------------------------------------------------------------DDNS ---------------------------------------------------------------------------------------------------------------MAIL ----------------------------------------------------------------------------------------------------------------FTP -----------------------------------------------------------------------------------------------------------------DVR-CAMERA SETTING -------------------------------------------------------------------------------------DEVICE ------------------------------------------------------------------------------------------------------------DETECTION ------------------------------------------------------------------------------------------------------NETWORK BACKUP & PLAYBACK ----------------------------------------------------------------------ALARM ------------------------------------------------------------------------------------------------------------ALARM LIST -----------------------------------------------------------------------------------------------------GENERAL --------------------------------------------------------------------------------------------------------ACCOUNT --------------------------------------------------------------------------------------------------------ONLINE USER INFO -------------------------------------------------------------------------------------------FILE PATH ---------------------------------------------------------------------------------------------------------

29 30 30 30 31 31 32 37 37 38 39 39 40 40 41 42 43 43 44 44 45 45 46 47 47

APPENDIX #1

APPENDIX #2

APPENDIX #33

APPENDIX #

APPENDIX #33

APPENDIX #

APPENDIX #44

APPENDIX #

APPENDIX #55

APPENDIX #

INSTALL THE HDD -------------------------------- ---------------------------------------------- ----------------------------PIN CONFIGURATION --------------------------------------------------------------------------------------------- ---------RS232 PROTOCOL --------------------------------------------------------------------- ------------------------------------RECORDING TIME TABLE ----------------------------------------------------- -------------------------------------------COMPATIBLE USB BRAND ----------------------------------------------------------------------------------- ------------COMPATIBLE HDD BRAND --------------------------------------------- ---------------------------------------------- -----

49 51 53 54 55 56

PARTS AND FEATURES

1.1 FEATURES

MPEG4 DVR Technology

Compression format provides crystal clear image with real time performance

Multiplex

Allows live display, record, playback, backup, and network all at the same time

Long--

Long

Backup Function:

Remote Surveillance:

Intelligent Motion Trigger Recording:

Covert Recording:

A/V Support:

General:

Recording Hours:

500GB can record more than 4 days. (16CH, Frame Best Quality, 120IPS) Connect to Independent Disk Array (optional) to have more storage capacity

Backup files with USB interface, DVD-WRITER or CD-WRITER and network remote recording & backup

GPRS allows viewing and controlling of the system & also support remote surveillance with licensed software AP and IE browser Web surveillance supports 5 users simultaneously

With advanced motion detection function, scheduled motion detection recording (4 different adjustable factors for motion detection sensitivity) and convenient search function, customized security environment is achieved

Alarm trigger recording will send alert with images to designated e-mail and FTP address Supports pre-alarm recording (8MB)

A mask replaces the live image with a blank screen & the monitor shows nothing but recording is still on

Supports 4 audio-in, 2 audio-out to record sounds Supports VGA output to monitor (optional)

Support multi-language OSD System auto recovery after power reconnected IR remote control of the system and PTZ through RS-485 Support daylight saving function Support manual / timer / motion / alarm / remote recording functions Watermark function ensures authentication of recorded images Support TCP/IP, PPPoE, DHCP and DDNS network connection

1.2 PACKAGE CONTENTS

4CH8CH16CHMODEL

Digital Video Recorder Adapter Licensed Software AP IR Transmitter and IR Receiver Power and Data Bus DSUB PIN Connector Screws

NOTE: Please check the package contents to make sure that you receive all accessories shown above.

ˇˇ

Optional

16CH / 8CH / 4CH

DVD-RW / CD-RW

ˇˇˇˇ ˇˇˇˇ ˇˇˇˇ ˇ ˇˇˇˇ ˇˇˇˇ ˇˇˇˇ

1.3 SPECIFICATION

MODEL

Video Compression Format Video Input

(Composite video signal 1 Vp-p 75Ω BNC)

Video Loop Out

(Composite video signal 1 Vp-p 75Ω BNC)

Video Output

Maximum Recording Rate (Frame)

Maximum Recording Rate (CIF)

Adjustable Recording Speed (Frame)

Adjustable Recording Speed (CIF)

Image Quality Setting Hard Disk Storage

(IDE type, ATA66) (over 400GB) HDD Quick Cleaning Recording Mode Watermark Refresh Rate

Multiplex Operation Audio I/O Motion Detection Area Motion Detect Sensitivity Pre-alarm Recording Backup Device

16CH / 16CH (D)

16 Channels

Main Monitor Output:

Call Monitor Output:

720 × 480 pixels with 120 IPS〈NTSC〉 720 × 576 pixels with 100 IPS 〈PAL

352 × 240 pixels with 480 IPS〈NTSC〉 352 × 288 pixels with 400 IPS 〈PAL〉

120, 60, 30, 15 IPS <NTSC> 100, 50, 25, 12 IPS <PAL>

480, 240, 120, 60 IPS <NTSC> 400, 200, 100, 50 IPS <PAL>

16CH: support HDD * 2

16CH (D): support HDD *1

Quick clean up the “index system” of the recorded files. 250GB under 2 seconds

480 IPS for NTSC

400 IPS for PAL

Support GPRS to access the system via mobile phone (require J2ME, MIDP2.0 protocol)Mobile Surveillance

Remote control DVR and PTZ via IR transmitter (RS-485) (4CH: Optional)IR transmitter

16 inputs, 1 outputAlarm I/O

〉

live display, record, playback, backup, and network

4 adjustable variables with precise calculation for motion detection

10/100 Base-T. Support remote control and live view via EthernetEthernet

E-mail images, and images uploading to FTP site’s specific accountRemote Alarm Notification

Programmable with adjustable dwell time (2, 4, 8, 16 sec.)Dwell Time (Sequential Channel Switch)

8CH / 8CH (D) 4CH / 4CH (D)

NTSC / PAL (switch able) Video System

MPEG 4

8 Channels 4 Channels

Composite video signal 1 Vp-p 75Ω BNC

720 × 480 pixels with 60 IPS〈NTSC〉 720 × 576 pixels with 50 IPS 〈PAL〉

352 × 240 pixels with 240 IPS〈NTSC〉 352 × 288 pixels with 200 IPS 〈PAL〉

60, 30, 15, 7 IPS <NTSC> 50, 25, 12, 6 IPS <PAL>

240, 120, 60, 30 IPS <NTSC> 200, 100, 50, 25 IPS <PAL>

Best, High, Normal, and Basic

8CH: support HDD * 2

8CH (D): support HDD *1

Manual∕Timer∕Motion∕Alarm

Yes

240 IPS for NTSC

200 IPS for PAL

4 audio inputs, 2 audio outputs (Mono)

16 × 12 grids per camera for a ll channels

Yes (8 MB)

USB1.1 / 2.0 backup and network remote backup

Motion JPEGWeb Transmitting Compression Format

Support licensed software AP, and IE browserWeb Interface

TCP/IP, PPPoE, DHCP and DDNSNetwork Protocol

Support PELCO-D protocolPTZ control

8 inputs, 1 output 4 inputs, 1 output

Support 2X digital zoom functionPicture Zoom

YesKey Lock YesVideo Loss Detection

720 × 480 pixels with 30 IPS〈NTSC〉 720 × 576 pixels with 25 IPS 〈PAL

352 × 240 pixels with 120 IPS〈NTSC〉 352 × 288 pixels with 100 IPS 〈PAL〉

30, 15, 7, 3 IPS <NTSC> 25, 12, 6, 3 IPS <PAL>

120, 60, 30, 15 IPS <NTSC> 100, 50, 25, 12 IPS <PAL>

〉

4CH: support HDD * 1

4CH (D): support HDD *1

120 IPS for NTSC

100 IPS for PAL

front panel * 1front panel * 1, back panel * 1USB Interface

MODEL

Specification Continued …

Camera Title Video Adjustable Date Display Fo rmat Daylight Saving Power Source

Operating Temperature Dimensions (mm)

System Recovery

Optional Peripherals

16CH / 16CH (D)

YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off

＜64 WPower Consump tion

432mm (W) × 90mm (H) × 326mm (D)

System auto recovery after power reconnected

Independent Disk Array ; VGA Connector

8CH / 8CH (D) 4CH / 4CH (D)

Support up to 6 letters

Hue∕Color∕Contrast∕ Brightness

Yes

DC 19V

4CH: ＜42 W ; 4CH (D): ＜64 W

10℃ ~ 40℃ (50℉~104℉)

432mm (W) × 90mm (H) × 326mm (D)

Independent Disk Array ; VGA

Connector ; IR Remote Control

 Any changes made to the actual product are subjects to no further notification.

1.4 FRONT PANEL

16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D)

1) POWER: Press “POWER” button to turn on/ turn off the DVR. (Under recording mode, please stop record before turn off the DVR)

2) MENU: Press “MENU” button to enter main menu.

3) ENTER / RECORD: Press “ENTER” button to confirm. Press “RECORD” to activate the manual recording.

4) “＋ ““－ ”: Press “＋ “or “－ ” button to change the setting in the menu / to select the channel. Press “＋“and “－－” buttons to open / close the DVD / CD WRITER.

5) USB: Support firmware update and files backup.

6) LED LIGHT: POWER: Power on STANDBY: Standby HDD: HDD is reading or recording HDD Full: HDD is full. ALARM: Once the alarm is triggered TIMER: When timer recording is turned on. REC: Under recording status PLAY: Under playing status

7) MODE : Press “MODE ” button to switch channel display mode.

8) “ ” : Press “ ” button to pause the play back files.

9) “ ” : Press “ ” button to stop the play back files.

10) “ “ : Under playback mode, press “ ” button to fast rewind.

11) “ “ : Under playback mode, press “ ” to fast forward.

12) “ZOOM” : Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

13) “PLAY” : Press “PLAY” button to playback recorded files.

14) “▲▼◄►“: Press “▲▼◄►” to move the cursor up / down / left / right.

15) “SHIFT”+ “SEQ”: Press “SHIFT” + “SEQ”to activate the call monitor function and press “SEQ” to escape the call monitor mode.

16) “SHIFT” + “AUDIO“ : Press “SHIFT” + “AUDIO“ to select live or playback sounds of the 4 audio channels.

17) “SHIFT” + “SLOW“ : Under playback mode, press “SHIFT” + “SLOW“ to show slow playback.

18) “SHIFT” + “CH－ “or “CH＋”: Press “SHIFT” + “CH－ “ or “CH＋” change the setting in the menu / to select the channel.

19) “SHIFT” + “SET” : Press “SHIFT” + “SET” to change channel display position.

Press “▲▼◄►” to select the channel which You would like to change, Press “＋”or “－” select the channel which You would like to show. Press “ENTER” button to confirm.

20) “SHIFT” + “SEARCH” : Press “SHIFT” + “SEARCH” buttons to enter the search mode.

21) “ ” + “ ” : Press “ ” + “ ” buttons at the same time to enter / exit the PTZ control mode.

1.4 FRONT PANEL

4CH

1) “HDD Cartridge Lock”: Lock / Unlock the cartridge of the HDD.

2) “USB”: Support firmware update and files backup.

Continued……

Continued

3) “LED LIGHT”: HDD: HDD is reading or recording

HDD Full: HDD is full. ALARM: Once the alarm is triggered TIMER: When timer recording is turned on PLAY: Under playing status REC: Under recording status

4) “MENU”: Press “MENU” button to enter main menu.

5) “ENTER”/ “SET”: Press “ENTER” button to confirm.

Press “SET” to change channel display position. Press “▲▼◄►“ to select the channel which you like to change,

Press “＋”or “－” select the channel which You would like to show. Press “ENTER” button to confirm.

6) “SEARCH ”: Press “SEARCH” button to enter the search mode.

7) “SLOW ”: Under playback mode, press “SLOW“ button to show slow playback.

7) “ZOOM ”: Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

8) “ ” / “ － ”: Press “ “ button to show the 4 channel display mode. Press “ － ” button to change the setting in the menu.

9) “SEQ”/ “＋ ”:

Press “SEQ” button to activate the call monitor function and press “SEQ” button again to escape the call monitor mode. Press “＋ ” button to change the setting in the menu.

10) “POWER”: Press this button to turn on / turn off the DVR. (Under recording mode, please stop record before turn off the DVR).

11) “CH1 ”“CH2 ”“CH3 ”“CH4 ”: Press “1 ”“2 ”“3 ”“4 ” buttons to select the channel.

12) “REC”:

Press “REC” button to activate the manual recording.

13) “PLAY”:

Press “PLAY” button to playback the recorded files.

14) “UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“: Press “▲▼◄►“ to move the cursor up / down / left / right.

Under playback mode, press “ “ button to pause playback. Under playback mode, press “ “ button to stop playback. Under playback mode, press “ “ button to fast rewind. Under playback mode, press “ “ button to fast forward.

15) “ ” : Press these two buttons to select live or playback sounds of the 4 audio channels.

16) “ ” : Press these two buttons at the same time to enter / exit the PTZ control mode.

1.5 REAR PANEL

16CH / 16CH (D)

1 2 10 11 12

LOOP

INPUT

DISK ARRAY

HI-IMPEDANCE

75? 8

RS 485

6 7 8 9

EXTERNAL I/O

USB

8CH / 8CH (D)

12 13

LOOP

INPUT

DISKARRAY

INPUT

LOOP

LOOP LOOP LO OP

INPUT INPUT

RS 485

EXTERNA L I/O

INPUT

USB

13 14 155

75?

HI-IMPEDANCE

D / V

LAN

6 7

LOOP LOOP LOOP

INPUT

LAN

D/V

MONITOR

1 3

CALL

LINK ACT.

DC19V

MONITOR

INPUT

LINK ACT.

CALL

DC 19 V

6 7

4CH / 4CH (D) ~ But size are different

75?

INPUT

LOOP

HI-IMPEDANCE

D/V

12 13

INPUT

LOOP

LOOP LOOP

DISK ARRAY

2 1

INPUT

EXTERNAL I/O

7 8

LAN

LINK

ACT.

CALLMONITOR

179

OUT

DC 19V

1) DISK ARRAY PORT: Connect to disk array for extend HDD capacity.

2) IR: Connect to IR receiver.

3) RS485: Connect to external device (such as PTZ camera) with RS485-A and RS485-B.

4) EXTERNAL I/O PORT: Connect to external device. Control external device or get controlled remotely by external device (alarm input, external alarm, PTZ camera).

5) USB PORT: Support firmware update and files backup.

6) D/V PORT (Digital Video Port): Connect to VGA connector card.

7) LAN: Connect to Internet by LAN cable.

8) LINK / ACT LED light: When the Internet is activated, the LED light will be on.

9) CALL MONITOR: Connect to CALL monitor. Show the channel switch display. When the alarm is triggered, the call monitor will show the image of the triggered channel for a period of time.

2: RS485B 3: RS485A

1234

10) POWER: Connect to provided adapter.

11) FAN: For ventilation.

12) VIDEO INPUT (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) : Connect to video source, such as camera.

13) LOOP (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) : Video output.

14) 75Ω / HI: When using Loop function, please switch to HI. When you don’t use Loop function, please switch to 75Ω.

15) MONITOR: Connect to Main monitor.

16) AUDIO IN (1-4): Connect to audio source, such as camera which equipped with audio function. When users start the recording function, the audio input will be recorded .

17) AUDIO OUT : Connect to monitor or speaker. With 2 mono audio outputs from the same source.

GETTING STARTED

2.1 GETTING STARTED

Connecting all the devices to construct a surveillance.

NOTE:

1) Install HDD: The HDD must be installed before the DVR is turned on.

2) Connect cameras.

3) Connect monitors.

4) Connect the external devices.

5) Connect the AC power cord to power adapter and plug into an electrical outlet. The standby LED would be on as red. Press the “POWER” button. The power LED will be on as red. It takes approximately 10 to 15 seconds to boot the system.

Take 16CH as an example

NOTE:

Please refer to Appendix #1 for HDD installation instructions. NOTE:

NOTE:

Please refer to “Section 1.5 Rear Panel” for connection. NOTE:

NOTE:

Please refer to Appendix#2 for pin configurations of the external I/O port .

System Time

Available Capacity of

Internal HDDs

Under HDD Overwrite

Mode

Channel Title

BASIC OPERATION

3.1 RECORDING

The DVR offers three recording modes, manual record, event recording, and timer record. If power is off accidentally, recorded video files will still be stored in the HDDs.

DVR will return to original recording status after power is on again.

1) MANUAL RECORDING (continuous recording) : Recording is initiated by manually pressing the “REC” button. Indicated by the sign “●”

2) EVENT RECORDING (triggered by motion and external alarm) : When this functions is activated, the recording is triggered by motion or external alarm. Indicated by the sign “ ” and “ ” .

3) TIMER RECORDING (scheduled time) : Recording is scheduled by Timer. Indicated by the sign “TIMER RECORD”.

NOTE : When the HDDs are full under O/W recording mode, previous recorded files may be overwritten without further warning notices.

Take 16CH as an example

Under

Recording

3.2 PLAYBACK

16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D)

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press ” ” once to get 4X speed forward and press twice to get 8X speed,… and the maximum speed can reach 32X. ＊ Press ” ” once to get 4X speed rewind and press twice to get 8X speed, … and the maximum speed can reach 32X. ＊ The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ ” button to pause the current image displayed on the screen. In the Pause mode,

＊ Press ” ” once to get forward by frame change. ＊ Press ” ” once to get rewind by frame change.

3) STOP:

Press “ ” button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to select display mode.

＊ Full Screen Switch:

Press “＋”or “－” button to show the full screen channels.

＊ Channel display switch:

Press “ ” + “ ”button. Press “▲”“▼”“

Press “＋”or “－” select the channel which You would like show. Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “ ” + “ ” button to get 1/4X speed playback and press twice to get 1/8X speed.

6) AUDIO:

Press “ ” + “ “to select live or playback sounds of the 4 audio channels.

＊ AUDIO 1 (L) ; AUDIO 1 (P) ＊ AUDIO 2 (L) ; AUDIO 2 (P) ＊ AUDIO 3 (L) ; AUDIO 3 (P) ＊ AUDIO 4 (L) ; AUDIO 4 (P)

◄”“►” to select the channel which You would like to change.

Note:

MENU_BACKUP” for detailed instruction

For the playback of the DVD or CD backup file, please refer to “Section 4.13 ADVANCE

4CH

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press “ “ once to get 4X speed forward and press twice to get 8X speed,

… and the maximum speed can reach 32X.

＊ Press “ “ once to get 4X speed rewind and press twice to get 8X speed,

… and the maximum speed can reach 32X.

＊ The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ “ button to pause the current image displayed on the screen. In the Pause mode,

＊ Press “ “ once to get forward by frame change. ＊ Press “ “ once to get rewind by frame change.

3) STOP:

Press “ “ button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to 4 channels display.

＊ Full Screen Switch:

Press “＋”or “－” button to show the full screen channels.

＊ Channel display switch:

Press “SET” to change channel display position. Press “▲▼◄►“ to select the channel which you like to change,

Press “＋”or “－” select the channel which You would like show. Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X.

6) AUDIO:

Press “ ” to select live or playback sounds of the 4 audio channels.

＊ AUDIO 1 (L) ; AUDIO 1 (P) ＊ AUDIO 2 (L) ; AUDIO 2 (P) ＊ AUDIO 3 (L) ; AUDIO 3 (P) ＊ AUDIO 4 (L) ; AUDIO 4 (P)

DETAILED MENU CONFIGURATION

4.1 MENU TREE

TITLE

RECORD

MANUAL RECORD

ENABLE

EVENT RECORD

ENABLE

TIMER RECORD

ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD

IPS

EVENT RECORD

IPS

TIMER RECORD

IPS

TOTAL IPS SHARE

TIMER

DATE

START

HH : MM

END

HH : MM

DISPLAY

TITLE DISPLAY

DATE DISPLAY

HDD INFO

LOSS SCREEN

PLAYBACK

INFO

DWELL

DURATION

(SEC)

DEDE-

INTERLACE

MONITOR

OUT

WATERMARK

DATE

DATE:

YEAR MONTH DAY

TIME:

HOUR MIN SEC

FORMAT: Y--MM--D D ……

FORMAT: Y

DAYLIGHT SAVING

ALERT

EXT. ALERT

INT. BUZZER

KEY BUZZER

VLOSS BUZZER

MOTION BUZZER

ALARM BUZZER

HDD BUZZER

HDD NEARLY FULL

(GB)

ALARM DURATION

(SEC)

PRE--

ALARM

PRE

ALARM

NETWORK

BACKUP

ADVANCE

CAMERA

DETECTION

REMOTE

SYSTEM

SERIAL TYPE

BAUD RATE

HOST ID

PASSWORD

RESET DEFAULT

CLEAR HDD

UPGRADE

AUTO KEYLOCK

BRIG

CONT

SATU

HUE

COV

REC

TITLE

DET

AREA

ALARM

DETECTION

TIMER

TITLE

DEVICE

PROTOCOL

RATE

HDD INFO

EVENT LOG

LANGUAGE

VERSION

VIDEO FORMAT

4.2 MAIN MENU OPTIONS___RECORD

Press “MENU” button to enter the main menu list. The default admin password is 0000. Enter the default password and press “ENTER”. (Users could alter the password later, please refer to “Section 4.11 ADVANCE MENU_SYSTEM”

Move the cursor to the “RECORD”, and press ”ENTER”, then the screen will show the following options.

(MENU)

►

RECORD

TIMER DATE ADVANCE

Use the following buttons for menu setting: “▲▼◄► “ to move the cursor.

)

RECORD

MANUAL RECORD ENABLE EVENT RECORD ENABLE TIMER RECORD ENABLE OVERWRITE RECORD IMG SIZE RECORD QUALITY MANUAL RECORD IPS EVENT RECORD IPS TIMER RECORD IPS TOTAL IPS SHARE

“＋ , －” to choose the numbers / selections. “ ENTER “ to go to the submenu / to confirm the selection “ MENU “ to go to the menu OSD

/ to confirm the change / to exit the menu OSD

1) MANUAL RECORD ENABLE: Start / Stop the manual recording function.

2) EVENT RECORD ENABLE: Start / Stop the event recording function. When this functions is activated, the recording will triggered by motion or external alarm

3) TIMER RECORD ENABLE Start / Stop the timer recording function.

4) OVERWRITE: Select to overwrite previous recording video in HDD. When the HDD is full under O/W recording mode, previous recorded files will be overwritten without further warning notices.

5) RECORD IMG SIZE: There are two recording options: FRAME & CIF. When change record image size, user need to stop recording first.

6) RECORD QUALITY: There are four quality settings: BEST, HIGH, NORMAL & BASIC

In the following (7) ~ (9) sections is for 16 channels.

For 8 channels, divided the IPS by 2. For 4 channels, divided the IPS by 4.

7) MANUAL RECORD IPS: Recording is activated by pressing the “REC” button. Select the images per second of MANUAL RECORD, The options are as the followings:

NTSC: FRAME: 120, 60, 30, 15

NTSC

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

PAL: FRAME: 100, 50, 25, 12

PAL

+ 42 hidden pages

Multiplex Technology 4CH, 8CH, 16CH User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual