Multiplex CHANNEL PLUS 5615, ChannelPlus 5625, ChannelPlus 5645 Installation Manual
Warranty
600-125 rev A
600-125 rev A
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one yearfrom thedate ofpurchase orMTI willrepair, or at its
option, replace the defective product. To obtain warranty
service, call MTI for a return material authorization (RMA)
number and return the product prepaid to Multiplex
Technology, Inc., 3001 Enterprise Street, Brea, CA 92821,
Attention: Customer Service. Please put the RMA number
on the outsideof the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or expenses,
whether direct, consequential or incidental arising from the
use of or the inability to use this product. Some states do not
allow limitations on how long the implied warranty lasts or
the exclusion or limitation or incidental or consequential
damages, so the above limitations and exclusions may not
apply to you. This warranty gives you specific legal rights,
and you may have other rights which may vary from state to
state.
Multiplex Technology, Inc., Brea, CA 92821
Multiplex Technology, Inc., Brea, CA 92821
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this device
without the permission of Multiplex Technology, Inc. may
void the user's authority to operate this equipment.
PERFORMANCE MULTI-ROOM VIDEO
Models
5615/5625/5645
Frequency-Agile
MTS Stereo
Multi-channel Modulators
Modulator
Installation Manual
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
Channel
R
®
model 5645 quad mts stereo surround sound modulator
dbx noise reduction
DCBA
program
select
STEREO
CHC
CHD
VIDEO AUDIOL AUDIO R
CHA
CHB
VIDEO AUDIOL AUDIO R
OUTPUT
600mA
15VDC
POWER
The ChannelPlus 5600 Series are digitally-tuned video modulators that convert any
baseband video and audio signal to a user-selected UHF, or Ultraband CATV. An
internal quartz crystal reference oscillator and PLL circuitry ensure drift-free
performance. The user selects the output frequency (channel) using the "select"
button to choose which modulator and the "program" button to enter the number of
the desired channel. Any TV connected to the output via coax can receive the
signals, when theTV is tunedto the proper channel.
In addition, the 5600 series encodes each channel using the MTS stereo standard.
Stereo sound and surround sound information will be received by any MTS
compatible television receiver.
5615 1 channel modulator
5625 2 channel modulator
5645 4 channel modulator
Models available:
®
model 5645 quad MTS stereo surround sound modulator
pll frequency control
DCBA
program
select
Controls and Connections - Model 5645 shown
RF output
Select button chooses
the modulator.
(5625 & 5645)
Program button enters
the channel number
Modulator LEDs show which
modulator is selected
Video inputs
Power supply
15VDC 600mA (5615 & 5625)
15VDC 900mA (5645 only)
Audio inputs: Right and Left
Terminating jumpers (remove for hi-Z)
2
Option:
To connect the video and audio to a local monitor, use RCA type ‘Y’ adaptors and
remove the ’LOOP’ jumper for this channel.
The model 5615 has built in loop through connectors, so it does not require the
use of ‘Y’ adaptors.
VIDEO AUDIO LAUDIO R
Removejumper for Hi-Z
(Seemanual)
ABCD
C
ADB
STEREO
Cable HRC andIRC considerations
Note
Most cable services use IRC frequency assignments. This is the default for
the ChannelPlus modulators. However, if the cable service
uses HRC or the TV appears to search for the "house channels," the
modulator can be reprogrammed to use HRC assignments by entering the
number “ 98”. Set to IRC by entering a “99”. Both of these settings are only
used for setting HRC/IRC. : This setting can be entered on any
modulator channel, A, B, C, or D, and affects all channel assignments for
that unit. Cable channels musteither be IRC or HRC.
5600 series
all all
Changing modulation standards
7
Specifications: typical @ 25 C ± 5 C
OO
5600 Series modulators
RF output
Power supply
Physical
performance
Video
Inputs
65-125
(excluding 95-99)
14-64
channel ranges
model number
signal/noise 55 dB
-60 dBC
9 watts
7 watts
11 watts
+25 dBmV (85dBuV)
105-125 VAC
-45dBC @ 12MHz
600mA 600mA 900mA
15 VDC
differential phase
<4º
differential gain
4%
audio
1 V rms @ 47k
video
UHF
564556255615
CATVstandard
1Vp-p@75
output level
input power
IM distortion
power consumption
alternate channel
output voltage
output current
weight 1.19 kg (2 lbs 10 oz)
depth 14.1 cm (5.5 in)
width 20.0 cm (7.9 in)
height 3.8 cm (1.5 in)
Mounting hole template
To hang with connectors on the side
To hang with connectors on the bottom or top
MTS audio
performance
65 dB
25 dB @ 1000Hz
Certified dbx
Compatible with
Dolby full logic surround sound
20Hz - 12kHz
frequency range
signal/noise
separation
noise reduction
surround sound
Loading...