Multiplex Beermaster PARTS LIST

Catalog

of Quality

Beer Fittings

and Hardware

250 Old Ballwin Road w St. Louis, Missouri 63021-4800

[e-mail] w www.multiplex-beverage.com

In accordance with our policy of continuous product development and improvement,

this information is subject to change at any time without notice.

Tel: [phone] w Fax: [phone]

00218023 Revision B (KAK) 28 July, 2000

Catalog of Quality Beer Fittings and Hardware

Multiplex Company, Inc.

Table of Contents

Terms and Conditions Affecting Customer Purchase Orders, Shipments of Materials, and Ordering

Parts .................................................................................................................. 1

How to order..................................................................................................... 1

Terms ............................................................................................................. 1

Method of shipment ............................................................................................ 1

Purchaser pick-up ............................................................................................... 1

Service parts ................................................................................................. 1

How to cancel an order ........................................................................................ 1

Damaged and lost shipments .................................................................................. 1

Return of merchandise ......................................................................................... 1

Replacement parts purchased for out-of-warranty equipment .......................................... 1

Replacement procedure ....................................................................................... 1

Barrel Fronts (Medium Oak Stained Finish)..................................................................... 2

Faucets ............................................................................................................... 2

Faucet Locks ........................................................................................................ 2

Fitting Kits ........................................................................................................... 3

Fittings and Hardware ............................................................................................. 4

Regulators and Regulator Parts .................................................................................. 6

Regulators (equipped with beer safety relief valves) ..................................................... 6

Regulator parts .................................................................................................. 7

Beer Accessories .................................................................................................... 8

Tavern Heads....................................................................................................... 10

Tools ................................................................................................................. 11

Tubing ............................................................................................................... 12

Bundled and insulated ........................................................................................ 12

Tubing key/colors .............................................................................................. 12

Drain tubing .................................................................................................... 13

Polyethylene tubing (beer tubing sold by the foot on 500 foot rolls) ................................. 13

Vinyl Tubing .................................................................................................... 14

Vinyl Reinforced Tubing ...................................................................................... 14

00218023 Revision B (KAK) 26 July, 2000

Catalog of Quality Beer Fittings and Hardware

Multiplex Company, Inc.

Terms and Conditions Affecting Customer
Purchase Orders, Shipments of Materials, and
Ordering Parts

How to order

For prompt service and shipment, contact your
nearest Multiplex Company Stocking Distributor. A
listing of the stocking distributors can be obtained
by contacting Multiplex Company, Inc.
(636)256-7777. To ensure prompt processing of
your orders, list each item separately, taking care
to specify quantity, the Multiplex part number and
description of each item ordered. Faster service
can be obtained in the future by listing your system
below.

Model Number ____________________________

Serial Number ____________________________

Date of Installation ________________________

Local Authorized
Stocking Distributor _______________________

Terms

Terms of NET 30 days will be extended to those
customers of known and acceptable financial
standing. All other orders must be accompanied
by check or will be shipped C.O.D. Please send all
credit information directly to our controller. Taxes
imposed by any present or future federal, state,
or local laws, if paid by us, will be charged to
purchaser. Sales or use taxes shall be in addition
to prices quoted unless an appropriate Tax
Exemption Certificate is furnished. Prices and
terms, designs, materials, specifications, weights
and dimensions for equipment or parts are subject
to change without notice.

Method of shipment

All merchandise is priced F.O.B. factory. All
shipments are carefully packed and labeled to
prevent damage or loss. Crates, boxes and cartons
used are of approved weight and strength. Orders
not routed by the purchaser will be shipped at our
discretion via the best method possible without
any liability on our part for such selection.

Purchaser pick-up

Service parts

Orders must be received at least 24 hours prior to
personal pick-up.

How to cancel an order

Multiplex will not accept the cancellation of any
order for special or proprietary equipment or parts
unless we receive payment of reasonable charges
based on expenses already incurred and
commitments made by Multiplex.

00218023 Revision B (KAK) 26 July, 2000

Damaged and lost shipments

The responsibility of Multiplex Co., Inc. ceases
upon acceptance of the products being shipped in
good condition by the carrier. Any damage or loss
sustained in shipment should be reported to the
delivering carrier immediately. The carrier is
responsible for all shipments. If you receive a
damaged shipment, ask the carriers agent for a
claim form and have the carrier prepare an
inspection report, a copy of Multiplexs invoice,
the freight bill, and a letter estimating the cost of
repair or replacement must be submitted to the
carrier before they can process your claim.
Compare the number of cartons received against
the number of cartons listed on our packing list or
Bill of Lading. If they do not agree, be sure to note
the shortage on the delivery receipt before
accepting delivery and signing the delivery of the
specified number of cartons. UPS shipments are
insured individually and UPS will replace all
merchandise that is lost. Notify us immediately if
you wish to trace merchandise lost in transit.

Return of merchandise

No merchandise is to be returned without our
approval. The purchaser must prepay the freight
for all returned goods. After receiving our approval,
all merchandise must be returned to our factory
at 250 Old Ballwin Road, St. Louis, Missouri 63021.
Multiplex is not responsible for merchandise
returned to any location other than our factory.

The merchandise authorized to be returned must
be in new, unused condition and in its original
carton with all original packaging.

A credit will be allowed amounting to the original
selling price or current selling price, whichever is
lower, less a 15% restocking charge, with a
minimum charge of $25.00 for each return to cover
cost of receiving, inspection, testing, repackaging,
and processing all documents.

Replacement parts purchased for out-of-warranty equipment

These parts will be repaired or replaced on an even
exchange basis (no labor allowance) during the 90
day period following shipment from our factory.

Replacement procedure

Prior approval must be received from Multiplex
before a unit, motor compressor and/or
components may be returned for replacement or
repair. Any unit or component returned, freight
collect, will be refused and returned to sender.

Multiplex will not accept any used equipment
for credit. The minimum invoice charge is
$25.00 per order.

1

Catalog of Quality Beer Fittings and Hardware

Multiplex Company, Inc.

Barrel Fronts (Medium Oak Stained Finish)

Item Part Number Description

99999996 14" Barrel Head, 14" Wide x 7" Deep.

99999997 21" Barrel Head, 21" Wide x 7" Deep.

Can accommodate up to three (3) faucets.

Can accommodate up to four (4) faucets.

Faucets

Item Part Number Description

00556923 Chrome Beer Faucet.
00216165 Brass Beer Faucet.
00216489 Chrome Faucet and Shank Kit, with Heat

00216488 Brass Faucet and Shank Kit, with Heat Exchanger

00211885 Plastic Wine Faucet.

Exchanger and Restrictor.

and Restrictor.

Faucet Locks

Item Part Number Description

2

00216695 Aluminum Faucet Lock without Padlock.
00211478 Padlock with Two Keys.

00218023 Revision B (KAK) 26 July, 2000

Catalog of Quality Beer Fittings and Hardware

Multiplex Company, Inc.

Fitting Kits

Item Part Number Description

Choice of a Small Kit (P.N.00211505) or Large Kit (P.N.00211507). Each kit includes Faucet Wrench
and Installation Instructions.

00209398 Cover,

1

/2"
80 Provided in Small Install Kit (P.N.00211505)
100 Provided in Large Install Kit (P.N.00211507)

00210048 Elbow, 1/2"

00210126 Union, 1/2"

00211290 Stem, 1/2"

00855011 Beer Nut

00211684 Foil Tape, 2" on 30 foot roll

14 Provided in Small Install Kit (P.N. 00211505)
30 Provided in Large Install Kit (P.N. 00211507)

29 Provided in Small Install Kit (P.N. 00211505)
35 Provided in Large Install Kit (P.N. 00211507)

5 Provided in Small Install Kit (P.N. 00211505)
8 Provided in Large Install Kit (P.N. 00211507)

5 Provided in Small Install Kit (P.N. 00211505)
8 Provided in Large Install Kit (P.N. 00211507)

1 Provided in Small Install Kit (P.N. 00211505)
2 Provided in Large Install Kit (P.N. 00211507)

00218023 Revision B (KAK) 26 July, 2000

00212342 PVC Tape, 2" on 100 foot roll, Black

1 Provided in Small Install Kit (P.N. 00211505)
1 Provided in Large Install Kit (P.N. 00211507)

3

Catalog of Quality Beer Fittings and Hardware

Multiplex Company, Inc.

Fittings and Hardware

Item Part Number Description

008529023/8" Flare Washer, Plastic

008503891/2" Beer Washer, Rubber

00850308 Primary CO2 Washer, Fiber

00855011 Beer Nut

005572071/4" Tailpiece, Barbed
002168185/16" Tailpiece, Barbed
005572083/8" Tailpiece, Barbed
005572541/2" Tailpiece, Barbed

002112901/2" Stem for Quick Connect Fitting

002138871/2" Stem Ball Valve Shut-off, Plastic

002093981/2" Cover for Quick Connect Fitting

002101261/2" Straight Quick Connect Fitting

4

00218023 Revision B (KAK) 26 July, 2000