Multiplex 44M04 Parts List

Multiplex Beverage Equipment Parts List for

Model 44M04 and 44MX04 Stainless Steel
Refrigeration Unit (R-404A)

P.N.SS904436, P.N.SS904437, P.N.SS904480, P.N.SS904481,
P.N.SS904482, P.N.SS904483, P.N.SS904484, and P.N.SS904485

Carbonator Motor/Pump

25

Model 44MA04 and 44MAX04 Air Cooled Refrigeration Unit

48, 49

46, 47

45

24

62

28

29

27

(P.N. SS904480 and P.N. SS904483)

46

Circulator Motor/Pump

24

25

23

45

21, 22, 50, 59

26

60, 61, 62

18

17

14

13

10

Carbonator Tank

16

15

12

10

9

Agitator Motor

19

5

6

11

7

19

8

4

44

56

58

2

57

43

56

42

41

39, 40

38

37

33

36

34

35

Multiplex Company, Inc.

250 Old Ballwin Road w St. Louis, Missouri 63021-4800
Tel: [phone] w Fax: [phone]
e-mail: [e-mail] w www.multiplex-beverage.com

63

54

Ice Bank Control Bulb

51

3

2

52

53

71

55

In accordance with our policy of continuous product development and improvement,

this information is subject to change at any time without notice.

PL904480 Revision D (KAK) 28 February, 2002

1

Note: A $25.00 minimum for parts order.

Multiplex Company, Inc.

Equipment Parts List

Model 44M04 and 44MX04 Stainless Steel Refrigeration Unit
(R-404A) Parts List (continued)

Model 44MR04 and 44MRX04 Remote Cooled Refrigeration Unit
P.N. SS904481 and P.N. SS904484

Carbonator Motor/Pump

62

25

24

56

2

28

29

27

Capacitor Box

31

30

32

Circulator Motor/Pump

24

25

23

26

58

57

43

56

42

41

39, 40

38

37

36

34

35

64, 65

66, 67

63

68

55

54

2

Revision D (KAK) 28 February, 2002

PL904480

Note: A $25.00 minimum for parts order.

Multiplex Company, Inc.

Equipment Parts List

Model 44M04 and 44MX04 Stainless Steel Refrigeration Unit
(R-404A) Parts List (continued)

Model 44MW04 and 44MWX04 Water Cooled Refrigeration Unit
P.N. SS904482 and P.N. SS904485

Carbonator Motor/Pump

62

25

24

56

2

28

29

27

Capacitor Box

31

30

32

Circulator Motor/Pump

24

25

23

26

58

57

43

56

42

41

39, 40

38

37

36

34

35

63

69

70

51

55

54

PL904480
Revision D (KAK) 28 February, 2002

3

Note: A $25.00 minimum for parts order.

Multiplex Company, Inc.

Equipment Parts List

Model 44M04 and 44MX04 Stainless Steel Refrigeration Unit
(R-404A) Parts List (continued)

Item Part No. Description Function

1 00215060 Bracket, Ice Bank Control Bulb Secures ice bank control in place.
2 00751143 Control, Ice Bank without Cover Maintains ice bank in water bath.
3 00855700 Tie, Cable, Self Locking, 3 3/4" Holds bulb in place.
4 00751208 Propeller, Plastic Agitates water in water bath.
5 00377102 Washer, Water Slinger Prevents water from contacting shaft bearing.
6 00200911 Heat Sink, Agitator Motor, Water Cooled Cools agitator motor.
7 00213018 Motor, Agitator, 230 VAC, 50/60 Hz, 23 W Drives agitator blade.
8 00859503 Roll Pin, 3/32" x 9/16", Stainless Steel Connects propeller to shaft.
9 00211645 Tank Assembly, Carbonator, 5" D x 22 1/2" L, Holds carbonated water.

10 00213452 Adaptor, 1/4" MF x 1/8" MPT, Stainless Steel, Provides connection.

11 00701312 Valve, Single Check, 1/8" NPT, Stainless Steel Prevents back flow.
12 00701334
13 Y0212104 Electrode Assembly, 11.6" (29.4 cm) Carbonator, Starts back-up carbonator pump when water

14 Y0212105
15 Y0212106
16 00212120 Cord Assembly Completes circuit to electrodes.
17 00856302 Washer, Internal Tooth Lock, Stainless Steel Holds hex nut to stud.
18 00850812 Hex Nut, 10-24, Stainless Steel Secures line assembly in place.
19 00215727 Bracket, Agitator Motor Mount Mounts agitator motor.
20 00859119 Tab Clamp Holds heat sink to agitator motor.
21 00852900 Washer, Tapered, 1/4" Flare, Nylon Provides seal.
22 00670024 Valve, Manual Water Feeder Shut-off Fills water bath with water.
23 00702910 Pump, 100 GPH (378 LPH), Stainless Steel Circulates carbonated water in system.

24 00705000 Coupling Clamp Assembly Holds pump and motor together.
25 00213596 Motor, Carbonator, 1/3 hp, 120/230 VAC, 50/60 Hz Drives the carbonator and the circulator pump.
26 00852523 Adaptor, 3/8 MF x 3/8 MPT, Stainless Steel Provides connections to the pump.
27 00702911 Pump, 100 GPH (378 LPH) Brass with Pumps water into carbonator tank.

28 00855902 Elbow, 3/8" MF x 3/8" MPT, Brass Provides connection to pump.
29 00852502 Adaptor, 3/8" MF x 3/8" MPT, Brass Provides connection to pump.
30 00215424 Relay, Compressor Start Provides current to compressor.
31 00214943 Capacitor, Run, 25 MFD, 440 VAC Maintains an even voltage.

00215798 Capacitor, Run, 30 MFD, 370 VAC
32 00201075 Capacitor, Start, 88-106 MFD, 250/330 VAC Provides voltage to start the compressor.
33 RM931423 Drain Hose, 3/4" x 1/8" Wall Allows water to drain from the water bath.
34 00756232 Accumulator, 3 1/2 lb, 1/2" Inlet, 1/2" Outlet Holds liquid refrigerant.
35 00215423 Compressor, 1 hp, 230 VAC, 1 Phase, 60 Hz Cycles refrigerant through the system.

00215799 Compressor, 1 hp, 230 VAC, 1 Phase, 50 Hz
36 00217288 Drier, 3.15 Diameter x 11.2" x 3/8" Outlet Removes moisture and impurities.
37 00201433 Valve, Tee Access, 3/8" Provides for attachment of service equipment.
38 00761906 Indicator, Liquid Moisture, 3/8" Solder Provides a way to inspect the liquid refrigerant.
39 00211772 Switch, Pressure, set at 4 psi Sends voltage to Time Delay Relay.
40 00212131 Bracket, Low Pressure Switch Mounting Secures the pressure switch in place.
41 00212137 Relay, Thermal Time Delay, Double Pole Delays the restarting of the pump motors.

3

/8" BS x 1/2" BS

0.140 Orifice

Valve, Toggle Relief, 150 lb, 1/8" MPT, Stainless Steel

Natural level falls below electrode.
Electrode Assembly, 8.9" (22.6 cm) Carbonator, Black
Electrode Assembly, 6.2" (15.7 cm) Carbonator, Red

without Relief

250 psi (17.2 bar) Relief

Single Throw, NC, 25 Amp, 240 VAC, Heater

Relieves excessive pressure at the carbonator.

Starts carbonator when water falls below electrode.
Stops carbonator when water reaches electrode.

4

Revision D (KAK) 28 February, 2002

PL904480

Note: A $25.00 minimum for parts order.

Multiplex Company, Inc.

Equipment Parts List

Model 44M04 and 44MX04 Stainless Steel Refrigeration Unit
(R-404A) Parts List (continued)

Item Part No. Description Function

42 00206695 Control, Liquid Level, 1/3 hp, 220 VAC Starts and stops the pump motor.
43 00202664 Contactor, 2 Pole, 25 Amp, 240 VAC Switches high voltage to the compressor.
44 00215584 Expansion Valve, 1/2 Ton, 5/8 x 3/8 x 1/4 Maintains proper refrigerant pressure.
45 00213510 Valve, Double Check, with Vent, 3/8" MF x 3/8" MF Prevents the back flow of CO2.
46 00209741 Elbow, 3/8" OD Tube x 3/8" OD Tube Connects the barb fitting to the tube.
47 00112041 Barb-Stem, Adaptor, 1/4" Barb x 3/8" Stem, Provides connection for the conduit tubing.

48 00205951 Pipe, Stand Drains water bath, serves as overflow tube.
49 00850127 O-ring, 5/8" ID x 3/4" OD, Ntrl Provides an air tight seal.
50 00205783 Tee, 3/8" MF Provides connection.
51 00212978 Condenser, 1 1/2 Ton, 12" x 18" Transfers heat from the refrigerant.

00211264 Condenser, 1 Ton Coaxial (P.N. SS904482 and

52 00213017 Blade, Condenser Fan Moves air through condenser.

00209103 Blade, Condenser Fan, Reverse Air Flow

53 00753725 Motor, Fan, 230 VAC, 50/60 Hz, 50 Watts! Turns fan blade.
54 00209758 Switch, Pressure, CO-400 CI-350 Maintains safe operating pressure.
55 00804437 Rocker Switch, Single Pole Single Throw, 16 Amp, Turns power on and off.

56 00212690 Lamp, Indicator, 250 VAC, Red Serves as a warning signal to operator.
57 00212688 Lamp, Indicator, 250 VAC, Green Serves as a warning signal to operator.
58 00212689 Lamp, Indicator, 250 VAC, Amber Serves as a warning signal to operator.
59 00858115 Adaptor, 1/4" MF x 3/8" FF, Stainless Steel Provides connection.
60 00854910 Barb-Stem Adaptor 3/8" Barb x 3/8" Swivel, Provides connection for tubing from pump.

61 00855013 Nut, Swivel, 3/8" Flare x 3/8" Tube, Stainless Steel Provides connection.
62 00852902 Washer, Tapered 3/8" Flare Provides seal.
63 00207414 Receiver, 4 lb (P.N. SS904480 and P.N. SS904483; Stores liquid refrigerant.

00209236 Receiver, 10 lb (P.N. SS904481 and P.N. SS904484)
64 00203820 Flange, Quick Connect Coupling Mounting, Mount quick connect to panel.

65 00203818 Coupling, Quick Connect, 1/2" ODF x 11/16" Male Connects the refrigeration line from the

66 00203819 Flange, Quick Connect, Mounting, 3/4" Hex, Mounts quick connect to the panel.

67 00203816 Coupling, Quick Connect, Mounting, 3/4" Hex Connects the refrigeration line from the

68 00209235 Valve, Head Pressure Control, 180 psi (12.4 bar) Controls the refrigerant under varying

69 00686910 Valve, Water Modulating 3/8" NPT Controls water flow to condenser.

70 00857608 Elbow, 1/2" MF x 3/8" MPT, Brass Inlet fitting to the water valve.

71 00217072 Bracket, Fan to Shroud Mounting Mounts the condenser fan to the shroud.

Stainless Steel

(P.N. SS904480 and P.N. SS904483)

P.N.SS904485)

(P.N.SS904437 only)

3

/4 hp, Rocker

Stainless Steel

P.N. SS904482 and P.N. SS904485)

1

/8" Hex (P.N. SS904481 and P.N. SS904484)

1

(P.N. SS904481 and P.N. SS904484) condenser.

(P.N. SS904481 and P.N. SS904484)

(P.N. SS904481 and P.N. SS904484) condenser.

(P.N. SS904481 and P.N. SS904484) conditions.

(P.N. SS904482 and P.N. SS904485)

(P.N. SS904482 and P.N. SS904485)

PL904480
Revision D (KAK) 28 February, 2002

5

Note: A $25.00 minimum for parts order.

Multiplex Company, Inc.

Equipment Parts List

Terms and Conditions Affecting Customer Purchase Orders,
Shipments of Materials, and Ordering Parts

How to order

Authorized Distributor. A listing of these stocking distribu­tors can be obtained by contacting Manitowoc Beverage Sys­tems, Inc. Customer Service Center:

Western Division

1001 Hamilton Drive
Holland, Ohio 43528
Tel: 1 (800)348-3864
Fax: [phone] or [phone]
Hours: 8:00am  8:00pm EST

Eastern Division

5075 Hollins Road
Roanoke, Virgina 24019
Tel: [phone]
Fax: [phone]
Hours: 8:00am  5:00pm EST

To ensure prompt processing of your orders, list each item
separately, taking care to specify quantity, the Multiplex Part
Number and Description of each item ordered. Faster service
can be obtained in the future by listing your system below.

Model Number ______________________________________

Serial Number ______________________________________

Date of Installation __________________________________

Local Authorized
Stocking Distributor _________________________________

Terms

Terms of NET 30 days will be extended to those customers
of known and acceptable financial standing. All other orders
must be accompanied by check or will be shipped C.O.D. Please
send all credit information directly to our controller. Taxes
imposed by any present or future federal, state, or local laws,
if paid by us, will be charged to purchaser. Sales or use taxes
shall be in addition to prices quoted unless an appropriate Tax
Exemption Certificate is furnished. Prices and terms, designs,
materials, specifications, weights and dimensions for equip­ment or parts are subject to change without notice.

How to cancel an order

Multiplex will not accept the cancellation of any order for
special or proprietary equipment or parts unless we receive
payment of reasonable charges based on expenses already in­curred and commitments made by Multiplex.

Damaged and lost shipments

The responsibility of Multiplex Co., Inc. ceases upon accep­tance of the products being shipped in good condition by the
carrier. Any damage or loss sustained in shipment should be
reported to the delivering carrier immediately. The carrier is
responsible for all shipments. If you receive a damaged ship­ment, ask the carriers agent for a claim form and have the
carrier prepare an inspection report, a copy of Multiplexs in­voice, the freight bill, and a letter estimating the cost of re­pair or replacement must be submitted to the carrier before
they can process your claim. Compare the number of cartons
received against the number of cartons listed on our packing
list or Bill of Lading. If they do not agree, be sure to note the
shortage on the delivery receipt before accepting delivery and
signing the delivery of the specified number of cartons. UPS
shipments are insured individually and UPS will replace all
merchandise that is lost. Notify us immediately if you wish to
trace merchandise lost in transit.

Return of merchandise

No merchandise is to be returned without our approval. The
purchaser must prepay the freight for all returned goods. Af­ter receiving our approval, all merchandise must be returned
to our factory at 250 Old Ballwin Road, St.Louis, Missouri 63021.
Multiplex is not responsible for merchandise returned to any
location other than our factory.

The merchandise authorized to be returned must be in new,
unused condition and in its original carton with all original
packaging.

A credit will be allowed amounting to the original sell­ing price or current selling price, whichever is lower, less
a 15% restocking charge, with a minimum charge of $25.00
for each return to cover cost of receiving, inspection, test-

repackaging, and processing all documents.

ing,

Method of shipment

All merchandise is priced F.O.B. factory. All shipments are
carefully packed and labeled to prevent damage or loss. Crates,
boxes and cartons used are of approved weight and strength.
Orders not routed by the purchaser will be shipped at our
discretion via the best method possible without any liability
on our part for such selection.

Purchaser pick-up

Service Parts

Orders must be received at least 24 hours prior to personal
pick-up.

6

Replacement parts purchased for
out-of-warranty equipment

These parts will be repaired or replaced on an even ex­change basis (no labor allowance) during the 90-day period
following shipment from our factory.

Replacement procedure

Prior approval must be received from Multiplex before a
unit, motor compressor and/or components may be returned
for replacement or repair. Any unit or component returned,
freight collect, will be refused and returned to sender.

Multiplex will not accept any used equipment for credit.
The minimum invoice charge is $25.00 per order.

PL904480

Revision D (KAK) 28 February, 2002