[1]-Water tank over flow to drain.
[2]-Drains water bath. Prevents over flow.
[3]-Provides tubing connection to Pre-mix tank.
[4]-Provides tubing connection to coils.
[5]-Provides tubing connection to carbonated water tank.
[6]-Drives circulator, carbonator, and Pre-mix pumps.
[7]-Provides water to the carbonation water tank.
[8]-Holds pump to motors.
[9]-Provides tubing connection to carbonation pump.
[10]-Circulates carbonated water through conduit.
[11]-Provides tubing connection to circulator and Pre-mix pumps.
[12]-Prevents back-flow of carbonated water.
[13]-Provides cooling for agitator motor.
[14]-Mounts agitator motor.
[15]-Provides agitator motor protection.
[16]-International
[17]-Drives agitator blade.
[18]-Hold heat sink to agitator motor.
[19]-Holds agitator blade to shaft.
[20]-Holds ice bank bulb in place.
[21]-Starts carbonator motor when water falls below electrode. Stops the Pre-mix motor.
[22]-Stops carbonator motor when water reaches electrode.
[23]-Carbonated water tank.
[24]-Prevents Pre-mix/Carbonated water from getting into CO2 lines.
Agitates water bath.
Model 38MA04B - Air-cooled Components
Model_38MA04B_parts_pl903859_1.pdf
Model 38MA04B
Model 38MA04B - Air-cooled Components
#PART #DESCRIPTIONQTYNote
[25]-Provides connection to the carbonator tank.
[26]-Relieves excess tank pressure.
[27]-Limits refrigeration compressor (high pressure).
[28]-Extracts heat from refrigerant.
[29]-Removes moisture and impurities from refrigerant.
[30]-Provides visual indication of refrigerant quality.
[31]-Moves air across condenser.
[32]-Turns fan blade.
[33]-Pumps refrigerant through the system.
[34]-Holds liquid refrigerant and protects compressor.
[35]-Allows service access to refrigeration system.
[36]-Provides voltage to start compressor.
[37]-Maintains even voltage.
[38]-Switches start capacitor "off".
[39]-Switches voltage to compressor.
[40]-Controls carbonator/Pre-mix pumps.
[41]-Sends signal to Ice Bank Control (IBC).
[42]-Controls ice bank size.
[43]-Replaces mechanical control.
[44]-Turns power "on/off" to unit.
[45]-Starts Pre-mix motor when product falls below electrode.
[46]-Provides tubing connection.
[47]-Pre-mix carbonator tank.
[48]-Injects the Pre-mix into tank.
[49]-Controls CO2 pressure to Pre-mix tank.
[50]-Displays CO2 pressure.
[51]-Provides pre-prepared mixture to Pre-mix tank.
[52]-Provides seal for stand pipe.
[53]-Provides seal for tank connections.
[54]-Provides seal for pump connections.
[55]-Controls water flow to condenser.
[56]-Inlet fitting to the water valve.
[57]-Transfers heat from the refrigerant.
[58]-Connects the ground wire to the tank.
[59]-Connects the electrodes to the Liquid Level Control.
[60]-Stores liquid refigerant.
[61]-Provides voltage to wunderbar.
[62]-Replenishes water level in bath.
Model 38MA04B - Air-cooled Components
Model_38MA04B_parts_pl903859_1.pdf
Model 38MA04B
Model 38MW04B - Water-cooled Components
Model 38MW04B - Water-cooled Components
Model_38MA04B_parts_pl903859_2.pdf
Model 38MA04B
Model 38MW04B - Water-cooled Components
#PART #DESCRIPTIONQTYNote
1RM931423Drain Hose - 0.75" x 0.125"[1]
200205951Stand Pipe[2]
300209697Elbow - 0.5" OD[3]
400209741Elbow - 0.375" OD[4]
500209947Adapter - 0.375" Barb x 0.375" OD Stem[4]
600210750Adapter - 0.375" Barb x 0.5" OD Stem[3]
700210862Tee - 0.5" OD x 0.5" OD x 0.5" OD[5]
800213596Carbonator Motor - 110-240V/50-60 Hz/1-3 Hp[6]
900702911Carbonator Pump[7]
1000705000Coupling Clamp[8]
1100852502Adapter - 0.375" MF x 0.375" MPT Brass[9]
1200855902Elbow - 0.375" MF x 0.375" MPT Brass[9]
1300702910Pump without Relief - 100 GPH - SS[10]
14OO852523Adaptor - 0.375" MF x 0.375" MPT SS[11]
1500218750Backflow Preventer - 0.375" MF x 0.375" MF[12]
1600200911Heat Sink[13]
1700215727Agitator Motor Bracket[14]
1800377102Washer - Water Slinger[15]
1900751208Propeller[16]
2000753715Agitator Motor - 115V/60 Hz[17]
2100859119Tab Clamp - SS[18]
2200859503Roll Pin - 0.09" x 0.6" SS[19]
2300215060Ice Bulb Control Bracket[20]
24Y0212105Electrode Assembly, 8.9 Carbonator, Black[21]
25Y0212106Electrode Assembly, 6.2 Carbonator, Red[22]
2600215616Carbonator Tank[23]
2700701312Single Check Valve[24]
2800213452Adaptor - 0.125" MPT x 0.25" Flare[25]
2900701334Toggle Relief Valve - 150 psi[26]
300209758Pressure Switch[27]
3100212978Condenser - Air-cooled[28]
3200217288Drier[29]
3300761906Liquid Moisture Indicator[30]
3400213017Fan Blade - Condenser[31]
3500753714Fan Motor - 115V/60 Hz[32]
3600215805Compressor - 115V/60 Hz/1 Ph[33]
3700756232Accumulator[34]
3800805703Service Valve[35]
3900215941Start Capacitor - 330V 72-88 MFD[36]
4000215815Run Capacitor[37]
4100215816Start Relay[38]
4200201224Contactor - 230V[39]
4300206182Liquid Level Control - 115V/1-3 Hp[40]
44A00219266Electronic Ice Bank Control Sensor (IBC)[41]
44B00219264Electronic Ice Bank Control[42]
44C00219491Electronic Ice Bank Control Kit - 115V[43]
[1]-Water tank over flow to drain.
[2]-Drains water bath. Prevents over flow.
[3]-Provides tubing connection to Pre-mix tank.
[4]-Provides tubing connection to coils.
[5]-Provides tubing connection to carbonated water tank.
[6]-Drives circulator, carbonator, and Pre-mix pumps.
[7]-Provides water to the carbonation water tank.
[8]-Holds pump to motors.
[9]-Provides tubing connection to carbonation pump.
[10]-Circulates carbonated water through conduit.
[11]-Provides tubing connection to circulator and Pre-mix pumps.
[12]-Prevents back-flow of carbonated water.
[13]-Provides cooling for agitator motor.
[14]-Mounts agitator motor.
[15]-Provides agitator motor protection.
[16]-International
[17]-Drives agitator blade.
[18]-Hold heat sink to agitator motor.
[19]-Holds agitator blade to shaft.
[20]-Holds ice bank bulb in place.
[21]-Starts carbonator motor when water falls below electrode. Stops the Pre-mix motor.
[22]-Stops carbonator motor when water reaches electrode.
[23]-Carbonated water tank.
[24]-Prevents Pre-mix/Carbonated water from getting into CO2 lines.
Agitates water bath.
Model 38MW04B - Water-cooled Components
Model_38MA04B_parts_pl903859_2.pdf
Model 38MA04B
Model 38MW04B - Water-cooled Components
#PART #DESCRIPTIONQTYNote
[25]-Provides connection to the carbonator tank.
[26]-Relieves excess tank pressure.
[27]-Limits refrigeration compressor (high pressure).
[28]-Extracts heat from refrigerant.
[29]-Removes moisture and impurities from refrigerant.
[30]-Provides visual indication of refrigerant quality.
[31]-Moves air across condenser.
[32]-Turns fan blade.
[33]-Pumps refrigerant through the system.
[34]-Holds liquid refrigerant and protects compressor.
[35]-Allows service access to refrigeration system.
[36]-Provides voltage to start compressor.
[37]-Maintains even voltage.
[38]-Switches start capacitor "off".
[39]-Switches voltage to compressor.
[40]-Controls carbonator/Pre-mix pumps.
[41]-Sends signal to Ice Bank Control (IBC).
[42]-Controls ice bank size.
[43]-Replaces mechanical control.
[44]-Turns power "on/off" to unit.
[45]-Starts Pre-mix motor when product falls below electrode.
[46]-Provides tubing connection.
[47]-Pre-mix carbonator tank.
[48]-Injects the Pre-mix into tank.
[49]-Controls CO2 pressure to Pre-mix tank.
[50]-Displays CO2 pressure.
[51]-Provides pre-prepared mixture to Pre-mix tank.
[52]-Provides seal for stand pipe.
[53]-Provides seal for tank connections.
[54]-Provides seal for pump connections.
[55]-Controls water flow to condenser.
[56]-Inlet fitting to the water valve.
[57]-Transfers heat from the refrigerant.
[58]-Connects the ground wire to the tank.
[59]-Connects the electrodes to the Liquid Level Control.
[60]-Stores liquid refigerant.
[61]-Provides voltage to wunderbar.
[62]-Replenishes water level in bath.
Model 38MW04B - Water-cooled Components
Model_38MA04B_parts_pl903859_2.pdf
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.