MultiPC NEO 180 USB, NEO 180, NEO 360 User Manual
v.1_20120430
NEO 180 USB
GUIA DE INSTALACION
1
TABLE OF CONTENTS
INTRODUCTION ....................................................................................... 2
FEATURES ......................................................................................... 2
PACKAGE CONTENTS ..................................................................... 2
APPLICATION .................................................................................... 3
SPECIFICATIONS .............................................................................. 4
SUPPORTED DISPLAY RESOLUTIONS .......................................... 4
MINIMUM SYSTEM REQUIREMENTS ............................................. 5
DEVICE INSTALLATION - SOFTWARE .................................................. 6
DEVICE INSTALLING - HARDWARE .................................................... 10
SPLIT-SCREEN STATION...................................................................... 11
ADJUSTING THE SCREEN RESOLUTION .......................................... 14
ADJUSTING THE SCREEN ROTATION ............................................... 17
SETTING TURN OFF ALL MONITOR ................................................... 17
SETTING POWER SAVING ................................................................... 18
DEVICE DRIVER UN-INSTALLATION .................................................. 20
VESA MOUNTING .................................................................................. 22
TROUBLESHOOTING TIPS .................................................................. 24
2
INTRODUCTION
Thank you for purchasing the MultiPoint Workstation. The MultiPoint Workstation
is designed specifically for Windows MultiPoint Server 2012. Simply connect it to
an available USB Port on the server, and attach a monitor, keyboard, and mouse
to add a new workstation. The MultiPoint Workstation features Two (Four)
high-speed USB 2.0 ports, audio and microphone ports, a VGA port that supports
resolutions up to 1680 x 1050. Add up to ten MultiPoint Workstation per server.
The MultiPoint Workstation provides an inexpensive and reliable way to expand
your Windows MultiPoint Server 2012 for school and office running “office
application”; “Home Entertainment” and “Full Screen Movie Playback” are not
recommended.
© 2013 Microsoft. All rights reserved.
Microsoft, Active Directory, MultiPoint Server, Office, .NET Framework, Windows, and Windows
Server are trademarks of the Microsoft group of companies. All other trademarks are property of
their respective owners
Simple plug and play setup
FEATURES
Eliminates the need for internal video card installation
Designed for Microsoft Windows MultiPoint Server 2012
Simplified administration
Up to 10 WorkStations per Server PC
MultiPoint Workstation
PACKAGE CONTENTS
VESA Mounting Kits
USB Cable
CD (Driver and User Manual)
3A/5V AC Power Adapter (option for NEO360 only)
3
APPLICATION
NEO180
○
1 2 High-Speed USB Ports
○
2 Audio Port (Speaker & Microphone)
○
3 VGA Port Supports up to 1600 x 1200
○
4 To PC (USB 2.0 Mini B type)
NEO360
4
SPECIFICATIONS
SUPPORTED DISPLAY RESOLUTIONS
5
Available USB 2.0 Port
MINIMUM SYSTEM REQUIREMENTS
Number of Users 4 6 10
CPU (*Note.1)
Quad-core processor
Recommended
Intel Core i5 Intel Core i5 Intel Core i7
Main Board Chipset
Intel Ivy bridge chipset / Intel Sandy bridge chipset
RAM
3GB 4GB 8GB
Minimum disk space for
setup
32GB
*Note.1:
x64-based Intel Pentium, Intel quad core (i7, i5, i3), XEON, Intel dual core.
Compatible processor (MultiPoint Server supports up to four core & eight core CPUs
on one server)
Multi-core processor support. Support up to 4 & 8 multi-core processors; dual-core is
less powered and therefore only 2 to 3 workstation can be supported.
AMD Opteron / Athlon, AMD Embed chipset is not recommend due to unstable
keyboard/ mouse operation which may not recognize under USB1.1 device.
For Optimum Video Display.
Extended video display at full screen is not recommended; it often exhausts CPU and
force system with much lower performance.
Intel Itanium Processor is not supported
Microsoft’s license policy is restricting for 10 users per CPU under “Standard
Academic version”, you can apply for 20 users only if your computer has 2 CPU and
your OS license is a “Premium Business version”.
FOR OPTIMUM VIDEO DISPLAY
Full screen video display is not recommended, user may try one station for
full screen video play back under 720P periodically. a higher system may
required for full screen video play back, please refer to following
specification:
- i7 processor
- Intel Sandy bridge chipset
- Intel Ivy bridge chipset
Note: Extended video display at full screen is not recommended; it often
exhausts CPU and force system with much lower performance.
6
Installing the device driver enables Windows MutliPoint Server 2012 to
recognize the MultiPoint Workstation. Please make sure the MultiPoint
Workstation is unplugged from your server before executing the setup
program.
DEVICE INSTALLATION - SOFTWARE
A Windows update must be completed before installing this Driver, if you have
completed Windows update you may skip step 2 and step 3
Step 1.
Insert the Driver installation CD into the CD-ROM drive. The installer should start
automatically. If it does not, double click Setup.exe to start the Installation Wizard.
Step 2.
This Driver will detect if you had most recent Windows update, click OK to check
updates
7
Step 3.
Follow the step showed below: click “Check to Update” on the left hand. Due to
Windows update complication,
it is very important to repeat this update step
for a few times until you see “You’re set to automatically install
updates” has pop out, because there are more than 50 scalable files to
be update that requires multiple repeats to complete all.
( Note : The system might remind to restart you system for several time).
Step 4.
Driver Installation Wizard, click Next to continue
Loading...