MultiDyne Versatile Brix, VB Instruction Manual

Page 1
INSTRUCTION MANUAL
Versatile Brix Cards
MultiDyne
(877) 685-8439 / (516) 671-7278 / FAX (516) 671-3362
10 NEWTON PLACE
HAUPPAUGE, NY 11788 USA
sales@multidyne.com
www.multidyne.com
Page 2
Versatile Brix Cards
Table of Contents
LIST OF FIGURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
LIST OF TABLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. FEATURES AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3. DIFFERENT CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3.1. VIDEO CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2. AUDIO CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3.3. DATA CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.4. ETHERNET CARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1 VB6 SERIES FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 VB3 SERIES FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5. APPENDIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.1 VIDEO CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.2 DATA CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3 SYNC SIGNAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.4 ETHERNET CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Page 3
List of Figures
Figure 3.1: VIDEO CARD 5 Figure 3.2 AUDIO CARD 5 Figure 3.3: DATA CARD 7 Figure 3.4: ETHERNET CARD 8 Figure 4.1: FRONT PANEL FRONT VIEW VB6 8 Figure 4.1: REAR PANEL REAR VIEW VB6 8 Figure 4.2: VB3 SERIES FRONT PANEL 9 Figure 5.1: SDI INPUT FRONT 10 Figure 5.1: SDI INPUT REAR 10 Figure 5.1: SDI OUTPUT FRONT 10 Figure 5.1: SDI OUTPUT REAR 10 Figure 5.2: DATA CARD FRONT 10 Figure 5.2: REAR DATA CARD REAR 10 Figure 5.3: FRONT SERIALIZER CARD 11 Figure 5.3: REAR OF SERIALIZER CARD 11 Figure 5.4: FRONT OF ETHERNET CARD 11 Figure 5.4: REAR ETHERNET CARD 11 Figure 6.1: POWER 11
Versatile Brix Cards
List of Tables
Table 1: AUDIO CARD PIN DESCRIPTION 6 Table 2: DATA CARD PIN DESCRIPTION 7 Table 3: DIFFERENT SLOTS FUNCTIONALITY WITH DIFFERENT CARDS FOR VB6 9 Table 4: DIFFERENT SLOTS FUNCTIONALITY WITH DIFFERENT CARDS FOR VB3 9
©2018 MultiDyne, Inc Made in the USA November 28, 2018
3
Page 4
Versatile Brix Cards
Introduction
e Versatile Brix Series of stand-alone SMPTE 4K video Serial Digital Interface (UHD-SDI) with audio, Ethernet and data transport systems extends the range limits of electrical interfaces. It combines all the signals along with a single optical ber link. e system will transport digital signals from 5 Mbps up to 12Gbps video, analog audio, and AES digital audio, serial data, tally, and General Purpose I/O (GPIO) signals.
Applications include transmission links for high denition or digital television, studio to transmitter; studio-to­studio, robotic studio cameras, studio to CATV head-end and backhaul feeds from special events.
Features and Operation
e VB series video cards supports all popular standards for digital video transport such as SMPTE ST 2082, SMPTE ST 2081, SMPTE 424M, SMPTE 292M,and SMPTE 259M working at 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI,SD-SDI respectively. In addition, the SDI interface also will transport signals compatible with DVB/ASI, and SMPTE 297M interfaces at the dened rates. e units include a digital re-clocked DA and repeater for the SMPTE SDI standards mentioned above. For other standards and rates, the signal is automatically or manually passed thru without re-clocking. For all SDI input, the units include automatic cable equalization based on the data rate detected.
e VB series also transports 4x4 analog audio channels with maximum congurable levels of 4dBu, 10dBu, 16dBu, or 28 dBu; 2 digital AES pairs up to 96 KHz that cross convert with the 4 analog channels; and a bidirectional stereo channel for intercom applications with maximum level of 4dBu.
e VB series data card supports 1 bidirectional tally and 1 GPIO bidirectional channel and 2 data channel with RS232 or RS422/ RS485 transport up to 3Mbps.
e VB series can also be ordered with an Ethernet card. e Ethernet card can also be ordered with 2 Ethernet ports. at can be used to extend a gigabit Ethernet connectivity over ber. Rates of 10/100/1000 Mbps are supported for Ethernet.
e VB series also sports a Sync transport option. It supports sync formats are NTSC, PAL, and HD Tri-Level.
4
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Page 5
Versatile Brix Cards
4 AUDIO INPUTS
4 AUDIO OUTPUTS
Dierent Cards
3.1. VIDEO CARD
e video cards are dual channel cards. ey can be ordered in 2 options based on the data rate required.
1) 3G option
2) 12G option
e video cards can be congured into single\dual transmitter or single\dual receiver options only. e conguration is based on the SFPs plugged into the module. e SFPs have to be NON-MSA, and SDI video SFPs. When in transmit conguration is used the board congures to receive video over copper. So the video is equalized and re-clocked before transmitting over ber. In receive conguration they are received over ber and re-clocked and driven over copper by the cable driver. e data rates are indicated over the front led panel. e 3G video board indicates SD, HD and 3G for both the channels. e 12G video board indicates 3G, 6G or 12G option.
Figure 3.1: VIDEO CARD
3.2. AUDIO CARD
Figure 3.2: AUDIO CARD
e audio cards support 2 stereo inputs and 2 stereo outputs on each side. So, the link supports two balanced stereo pairs, or two AES channels of high quality audio. In the RX side, for each stereo pair, and whatever signal either analog or digital was congured on the TX side, is sent simultaneously to the analog and digital AES ports. e system has to be ordered either as analog or AES or a combination of both. is feature eectively can convert an analog signal in the TX side to digital in the RX side, or the reverse case. e AES channels can be ordered to 75ohms single ended or 110 ohms balanced. e audio LEDs indicate three possible statuses: constant blinking green indicates AES signal is present, green indicates analog level is present.
©2018 MultiDyne, Inc Made in the USA November 28, 2018
5
Page 6
Versatile Brix Cards
Table 1: AUDIO CARD PIN DESCRIPTION
PIN NUMBER PURPOSE 1 GND 2 AUD_IN­3 AUD_IN+ 4 GND 5 AUD2_IN+ 6 AUD2_IN­7 GND 8 AUD3_IN+ 9 AUD3_IN­10 GND 11 AUD4_IN+ 12 AUD4_IN­13 GND 14 GND 15 AUD1_OUT+ 16 AUD1_OUT­17 GND 18 AUD2_OUT+ 19 AUD2_OUT­20 GND 21 AUD3_OUT+ 22 AUD3_OUT­23 GND 24 AUD4_OUT+ 25 AUD4_OUT­26 GND
6
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Page 7
Versatile Brix Cards
3.3. DATA CARD
Figure 3.3: DATA CARD
e data card support one channel of bidirectional Tally and one bi-directional general purpose input output. It also supports 2 channel of bidirectional data. e data can be set in dierent conguration. e channels are set to by default RS422. e cards can be ordered with RS422 or RS485 by changing the switch on the card as shown in the above image or preset with RS232, RS422 or RS485 at the customers request. e LEDS in the front will turn on showing the data paths are active.
e interface is through a HD15 connector. e pinouts of the connector are as shown below.
PIN NUMBER FUNCTION
1 CH1 RX­6 CH1 RX+ 7 CH1 TX-
11 CH1 TX+
2 CH2 RX+ 8 CH2 RX-
12 CH2 TX+
3 CH2 TX-
9 TALLY IN 10 GPI 13 GPO
4 TALLY OUT 14 GND 15 GND
Table 2: DATA CARD PIN DESCRIPTION
©2018 MultiDyne, Inc Made in the USA November 28, 2018
7
Page 8
Versatile Brix Cards
3.4. ETHERNET CARDS
Figure 4: ETHERNET CARD
e Gigabit Ethernet includes a copper to ber Ethernet media converter. Data rates of 10/100/1000 Mbps are supported. When a link is established between 2 units. e green LED in the front will turn on. en as the ports are connected the lights will icker.
Front Panel
4.1 VB6 SERIES FRONT PANEL
Figure 4.1: VB6 SERIES FRONT PANEL VIEW
e front panel of a standard VB6 box has 6 slots. Each slots have capabilities of driving 6 green color LEDs for signals as shown in the image above. e slot have an opening in the front to mount a centrifugal fan that pushes air outside. When the box is populated with more than 3 cards it is a standard feature to mount it with a fan to keep the box temperature.
8
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Figure 4.1: VB6 SERIES REAR PANEL VIEW
Page 9
e below table talks about what are the capabilities of dierent slots.
Table 3: VB6 SERIES SLOTS FUNCTIONALITY WITH DIFFERENT CARDS
CARD TYPE SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 SLOT6 VIDEO CARD YES YES YES YES YES YES ETHERNET CARD YES YES YES YES YES YES
DATA CARD NO YES
AUDIO CARD NO YES
SYNC(SERIALIZER) YES YES YES YES YES YES
4.2 VB3 SERIES FRONT PANEL
NO (ALLOCATED FOR SERIALIZER)
NO (ALLOCATED FOR SERIALIZER)
Versatile Brix Cards
YES
YES(2 DATA AND TALLY)
YES
YES YES YES
Figure 4.2: VB3 SERIES FRONT PANEL VIEW
Similar to the VB6 Series front panel. e VB3 series front panel can accommodate to 3 cards. Below shown are the card slots and their adaptability.
Table 4: VB3 SERIES SLOTS FUNCTIONALITY WITH DIFFERENT CARDS
CARD TYPE SLOT1 SLOT2 SLOT3 VIDEO CARD YES YES YES ETHERNET CARD YES YES YES
DATA CARD NO
AUDIO CARD NO
NO (ALLOCATED FOR SERIALIZER)
NO (ALLOCATED FOR SERIALIZER)
YES
YES
SYNC(SERIALIZER) YES YES YES
©2018 MultiDyne, Inc Made in the USA November 28, 2018
9
Page 10
Versatile Brix Cards
5. Appendix
e products changes are based on the conguration ordered, and there is no consistent front panel. e front panel changes are based on the conguration ordered and the box ordered.
e below shows what fashion of LEDs to expect for dierent cards.
5.1 VIDEO CARD
e front top of the led panel shows the channel number and the rear shows the BNC number. It also shows the data rate of the signal and whether it is an input or output.
Figure 5.1: SDI INPUT FRONT
Figure 5.1: SDI OUTPUT FRONT
5.2 DATA CARD
e data light remains on when the channels are active.
Figure 5.2: DATA CARD FRONT Figure 5.2: DATA CARD REAR
Figure 5.1: SDI INPUT REAR
Figure 5.1: SDI OUTPUT REAR
10
©2018 MultiDyne, Inc Made in the USA November 28, 2018
* For RS485 applications connect together TX and RX with a small 680 Ohm resistor as shown below
TX+ TX- RX+ RX-
J3
+ –
RS 485
Page 11
Versatile Brix Cards
5.3 SYNC SIGNAL
Figure 5.3: FRONT SERIALIZER CARDS
e SYNC card has 2 LEDS. One of the signal shows that the link has been established. Once the link light is on, it means the audio card and data card also has the attained link. e second LED is the SYNC OUT or SYNC IN. Usually the camera side has SYNC OUT and the base side is SYNC IN. Presence od SYNC in either boxes illuminates the LED. e output on the rear is just LED.
Figure 5.3: REAR SERIALIZER CARDS
5.4 ETHERNET CARD
Figure 5.4: REAR ETHERNET CARDSFigure 5.4: FRONT ETHERNET CARD
e Ethernet LED is represented with the standard LAN symbol. It glows green when the Link has been established and it starts ickering as the data is being transmitted. e rear has 2 ports with an inbuilt Ethernet switch.
6.1 POWER
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Figure 6.1: REAR ST POWER INPUT
11
Page 12
©2018 MultiDyne, Inc Made in the USA November 28, 2018
Loading...