High Power LED
OS-83 Series
Features:
• Super High Luminance
• All chips can be individually driven to provide the required colour
µ
µ
Electrical & Optical Characteristics at Ta=25 C
Ant Part No. Material Lens Colour
Dominant
Wavelength
(nm) at 350mA
min. max.
Luminous
Flux (1m)
at 350mA
min. max.
Forward
Voltage (V)
at 350mA
min. max.
Viewing
Angle
2 0 (deg)
1/2
Emitted Colour
LED Chip
OSW-8349
Blue
Water Clear 18 30.51.8 2.8 120
InGaN / A1 O
23
InGaN / Sapphire
True Green Water Clear 30.5503.0 4.0 120
A1GaInP/Si
Red
Water Clear 10.7 13.9
620 630
520 535
460 475 3.04.0 120
Thermal
Resistance
Junction to
Board ( C/W)
15
15
15
OSW-8339
Blue
Water Clear 1.82.8 120
InGaN / A1 O
23
True Green Water Clear 3.04.0 120
A1GaInP/Si
Red
Water Clear
620 630
520 535
460 475 3.04.0 120
15
15
15
18 30.5
30.550
10.7 13.9
2
5
1
6
3
4
G
R
B
2
1
3
5
6
4
OSW-8349
B
G
R
2
1.66
G
R
1 2 3
B
3 1
2
3 1
1 2 3
24.3
23.75
1.64
3.5
OSW-8339
InGaN / Sapphire
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, a ny error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any r eliance on the Information or use of it (including liability resulting from negligence or where the Group was a ware of the possibility of such loss o r damage a rising) i s excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
1.1V 80/01/22>1< egaP
High Power LED
Forward Vo ltage Vs Forward Current(Ta=25°C)
Wa velength Curve for white(Ta=25°C)
Temperature of Junction vs. Relative Light Output
for Blue,Green,Red(Ta=25°C)
Wa velength Curve for Red,Green,Blue(Ta =25°C)
Ambient Temperature vs. Allowable Forward Current for 1 chip
for White, Blue,Green,Red(Ta=25°C)
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. N o licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, a ny error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any r eliance on the Information or use of it (including liability resulting from negligence or where the Group was a ware of the possibility of such loss o r damage a rising) i s excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
1.1V 80/01/22>1< egaP
Loading...