Multichannel Systems SD32 User Manual
SD32
Use and Operation of the 32-Channel Signal Divider
The SD32 is used for picking single channels from the amplifier. The device is connected to the filter amplifier
(FA or PGA) and to the MC_Card or to an USB-ME-System with 68-pin MCS high grade cables. It does not
matter to which socket the input or the output is connected.
The supply voltage inputs are not used for this device, but may be used for custom setups without IPS10W.
An external power supply can be connected to the device, which passes the power to other devices of the
system, for example, to the FA amplifier. The input supply voltage can range from 6 V to 12 V.
Warning: The device may only be used together with ME-Systems and MEA-Systems
!
from Multi Channel Systems MCS GmbH, and only for the specified purpose.
Damage of the device and even fatal injuries can result from improper use.
Channel No. (linear layout)
123
91011
17 18 19
25 26 27
6566636461
67
68
Pin 1: GNDP (power ground)
Pin 2: GNDS (signal ground)
Pin 3 - 66: Channels 1 to 64
Pin 67: Positive voltage supply
Pin 68: Negative voltage supply
12
20
28
16
24
32
8
1
3
5
7
9
1
2
4
6
8
10
2
3
4
6
5
8
7
9
10
+
GND
59
61
63
65
67
59
60
62
64
66
68
60
61
62
63
64
65
66
67
68
–
4
567
13 14 15
21 22 23
29 30 31
68-pin MCS-standard connector
68-pin MCS standard connector Analog Input
62
59
60
9
10
87654
3
1
2
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25Fax
+49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
0
2012 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Loading...