Multichannel Systems SD16 User Manual
SD16
Use and Operation of the 16-Channel Signal Divider
The SD16 is used for picking single channels from the amplifier. The device is connected to the filter amplifier
(FA or PGA) and to the MC_Card or to an USB-ME-System with 68-pin MCS high grade cables. It does not
matter to which socket the input or the output is connected.
The supply voltage inputs are not used for this device, but may be used for custom setups without IPS10W.
An external power supply can be connected to the device, which passes the power to other devices of the
system, for example, to the FA amplifier. The input supply voltage can range from 6 V to 12 V.
Warning: The device may only be used together with ME-Systems and MEA-Systems
!
from Multi Channel Systems MCS GmbH, and only for the specified purpose.
Damage of the device and even fatal injuries can result from improper use.
Channel No. (linear layout)
123
567
91011
13 14 15
4
8
12
16
68-pin MCS standard connector Analog Input
6566636461
67
68
62
59
60
9
10
Pin 1: GNDP (power ground)
Pin 2: GNDS (signal ground)
Pin 3 - 66: Channels 1 to 64
Pin 67: Positive voltage supply
Pin 68: Negative voltage supply
1
3
5
7
9
59
61
63
65
67
87654
1
2
4
6
8
10
60
62
64
66
68
2
3
4
6
5
8
7
9
10
59
60
61
62
63
64
65
66
67
68
+
GND
–
68-pin MCS standard connector
3
1
2
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25Fax
+49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
0
2012 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Loading...