Multichannel Systems PH01 User Manual
PH01 Perfusion Cannula Manual
Information in this document is subject to change without notice.
No part of this document may be reproduced or transmitted without the express written
permission of Multi Channel Systems MCS GmbH.
While every precaution has been taken in the preparation of this document, the
publisher and the author assume no responsibility for errors or omissions, or for damages
resulting from the use of information contained in this document or from the use of
programs and source code that may accompany it. In no event shall the publisher and the
author be liable for any loss of profit or any other commercial damage caused or alleged
to have been caused directly or indirectly by this document.
© 2011
Multi Chann
el Systems MCS GmbH. All rights reserved.
Printed: 05.1
1.2009
Multi Chann
el Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
Products that are referred to in this document may be either trademarks and/or
registered trademarks of their respective holders and should be noted as such. The
publisher and the author make no claim to these trademarks.
PH01 Manual
Table of Contents
1.1 Operator's Obligations 2
1.2 Guarantee and Liability 2
1.3 Important Safety Advice 3
2.1 Welcome to the PH01 — Perfusion Cannula with Heating
Element and Sensor 4
2.2 Setting Up and Connecting the PH01 5
2.3 Flow Rate Dependent Temperature Offset 6
2.4 Air Drafts and Ambient Temperature 7
2.5 Pump Types 7
2.6 Flow Stream 8
3.1 Pin Assignment 8
1
Loading...