Multichannel Systems PG-MEA1060-INV User Manual

Plexiglass of MEA1060-INV-PGP
PG-MEA1060-INV

Plexiglass of Perfusion Ground Plate for MEA1060-INV Amplifier

Instructions for Changing the Plexiglass Part of the Perfusion Ground Plate
of the MEA1060-INV Amplifier

Perfusion Ground Plate in original state.

O-Ring-PGP

PGP-O-Ring

Disconnect the eight screws fixing the plexiglass with an Allen key 2.0. Disconnect the six screws
fixing the steel perfusion IN and perfusion OUT. Detach the broken plexiglass and replace the
new plexiglass. Press the steel tubes carefully into the provided slot. Tighten the screws very
softly first and screw them not too hard.

Multi Channel Systems
MCS GmbH

Aspenhaustrasse 21
72770 Reutlingen
Germany

Fon [phone]­Fax

[phone]

[e-mail]
www.multichannelsystems.com

0

Scope of delivery:
1 Plexiglass Part PG-MEA1060-INV
14 Screws (M3x5)

© 2012 Multi Channel Systems MCS GmbH

Product information is subject to change
without notice.