Multi Channel Systems PGA16, PGA32, PGA1632, PGA64, PGA3264 User Manual

- 1 -

Programmable Gain Amplifier PGA

Manual

Imprint

Information in this document is subject to change without notice. No part of this document may be
reproduced or transmitted without the express written permission of Multi Channel Systems MCS GmbH.

While every precaution has been taken in the preparation of this document, the publisher and the author
assume no responsibility for errors or omissions, or for damages resulting from the use of information
contained in this document or from the use of programs and source code that may accompany it.

In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage
caused or alleged to have been caused directly or indirectly by this document.

© 2018 Multi Channel Systems MCS GmbH. All rights reserved.

Printed: 26. 09. 2018

Multi Channel Systems MCS GmbH

Aspenhaustraße 21

72770 Reutlingen Germany

Phone[phone] - 0

Fax [phone]

[e-mail]

www.multichannelsystems.com

Microsoft and Windows are registered trademarks of Microsoft Corporation. Products that are referred to in
this document may be either trademarks and/or registered trademarks of their respective holders and should
be noted as such. The publisher and the author make no claim to these trademark.

- 3 -

Table of Content

1. Introduction ................................................................................................................. 4

1.1 About this Manual .................................................................................................... 4

2. Important Information and Instructions .................................................................... 5

2.1 Operator's Obligations .............................................................................................. 5

2.2 Guarantee and Liability ............................................................................................. 5

2.3 Important Safety Advices .......................................................................................... 6

2.4 Terms of Use for the Program ................................................................................... 7

2.5 Limitation of Liability ................................................................................................. 7

3. First Use of the PGA .................................................................................................... 8

3.1 Welcome to the Programmable Gain Amplifier ......................................................... 8

3.2 Installing the Software .............................................................................................. 9

3.3 Setting Up and Connecting the PGA ......................................................................... 9

4. Operating the PGA .................................................................................................... 11

4.1 Adjusting the Gain Settings .................................................................................... 11

4.2 Signal Amplification and Filters ............................................................................... 12

4.3 Differential Amplifier and Noise Reduction .............................................................. 13

5. Troubleshooting ........................................................................................................ 14

5.1 About Troubleshooting ........................................................................................... 14

5.2 Technical Support ................................................................................................... 14

5.3 Insufficient Power ................................................................................................... 15

6. Appendix .................................................................................................................... 16

6.1 Pin Layout ............................................................................................................... 16

6.2 Contact Information ............................................................................................... 17

6.3 Ordering Information .............................................................................................. 18

- 4 -

1 Introduction

1.1 About this Manual

This manual comprises all important information about the first installation of the hardware and software,
and about the daily work with the instrument. It is assumed that you have already a basic understanding
of technical and software terms. No special skills are required to read this manual.

If you are using the device for the first time, please read the important safety advice before installing the
hardware and software, where you will find important information about the installation and first steps.

The printed manual and help are basically the same, so it is up to you which one you will use. The help offers
you the advantage of scrolling through the text in a non-linear fashion, picking up all information you need,
especially if you use the “Index” and the “Search” function. If you are going to read larger text passages,
however, you may prefer the printed manual.

The device and the software are part of an ongoing developmental process. Please understand that the
provided documentation is not always up to date.

The latest information can be found in the "Help".

Check also the MCS web site www.multichannelsystems.com for downloading up-to-date manuals and help
files.

- 5 -

2 Important Information and Instructions

2.1 Operator's Obligations

The operator is obliged to allow only persons to work on the device, who

 are familiar with the safety at work and accident prevention regulations and have been instructed

how to use the device;

 are professionally qualified or have specialist knowledge and training and have received instruction

in the use of the device;

 have read and understood the chapter on safety and the warning instructions in this manual and

confirmed this with their signature.

It must be monitored at regular intervals that the operating personnel are working safely.

Personnel still undergoing training may only work on the device under the supervision of an experienced
person.

2.2 Guarantee and Liability

The general conditions of sale and delivery of Multi Channel Systems MCS GmbH always apply. The operator
will receive these no later than on conclusion of the contract.

Multi Channel Systems MCS GmbH makes no Guarantee as to the accuracy of any and all tests and data
generated by the use of the device or the software. It is up to the user to use good laboratory practice to
establish the validity of his findings.

Guarantee and liability claims in the event of injury or material damage are excluded when they are the result
of one of the following:

 Improper use of the device.
 Improper installation, commissioning, operation or maintenance of the device.
 Operating the device when the safety and protective devices are defective and/or inoperable.
 Non-observance of the instructions in the manual with regard to transport, storage, installation,

commissioning, operation or maintenance of the device.

 Unauthorized structural alterations to the device.
 Unauthorized modifications to the system settings.
 Inadequate monitoring of device components subject to wear.
 Improperly executed and unauthorized repairs.
 Unauthorized opening of the device or its components.
 Catastrophic events due to the effect of foreign bodies or acts of God.

- 6 -

2.3 Important Safety Advices

Warning: Make sure to read the following advice prior to install or to use the device and the
software. If you do not fulfill all requirements stated below, this may lead to malfunctions or
breakage of connected hardware, or even fatal injuries.

Warning: Obey always the rules of local regulations and laws. Only qualified personnel should
be allowed to perform laboratory work. Work according to good laboratory practice to obtain
best results and to minimize risks.

The product has been built to the state of the art and in accordance with recognized safety engineering rules.
The device may only

 be used for its intended purpose;
 be used when in a perfect condition.
 Improper use could lead to serious, even fatal injuries to the user or third parties and damage to the

device itself or other material damage.

Warning: The device and the software are not intended for medical uses and must not be used
on humans.

High Voltage

Electrical cords must be properly laid and installed. The length and quality of the cords must be in accordance
with local provisions.

Only qualified technicians may work on the electrical system. It is essential that the accident prevention
regulations and those of the employers' liability associations are observed.

 Each time before starting up, make sure that the power supply agrees with the specifications of

the product.

 Check the power cord for damage each time the site is changed. Damaged power cords should

be replaced immediately and may never be reused.

 Check the leads for damage. Damaged leads should be replaced immediately and may never be

reused.

 Do not try to insert anything sharp or metallic into the vents or the case.
 Liquids may cause short circuits or other damage. Keep the device and the power cords always dry.

Do not handle it with wet hands.

Requirements for the Installation

Make sure that the device is not exposed to direct sunlight. Do not place anything on top of the device,
and do not place it on top of another heat producing device, so that the air can circulate freely.

- 7 -

2.4 Terms of Use for the Program

You are free to use the program for its intended purpose. You agree that you will not decompile,
reverse engineer, or otherwise attempt to discover the source code of the software.

2.5 Limitation of Liability

Multi Channel Systems MCS GmbH makes no guarantee as to the accuracy of any and all tests and data
generated by the use the software. It is up to the user to use good laboratory practice to establish the validity
of his findings.

To the maximum extent permitted by applicable law, in no event shall Multi Channel Systems MCS GmbH
or its suppliers be liable for any special, incidental, indirect, or consequential damages whatsoever (including,
without limitation, injuries, damages for data loss, loss of business profits, business interruption, loss of
business information, or any other pecuniary loss) arising out of the use of or inability to use the program
or the provision of or failure to provide Support Services, even if Multi Channel Systems MCS GmbH has
been advised of the possibility of such damages.