Multichannel Systems MEA-STIM-ADPT-Up User Manual

MEA-STIM-ADPT-UP

Adapter to use MEAs with 16 additional stimulation electrodes
(60StimMEA 200/30-Ti/ITO or 60StimMEA 200/10-Ti/ITO) together
with MEA1060-UP amplifiers.

.

S = Stimulation G = Ground

First installation is made by Multi Channel System MCS GmbH. You can remove and install
the adapter using the four screws in the corners. The adapter is symmetrical, that is,
the orientation does not matter.

Warning: The adapter may only be used together with MEA1060-Up amplifiers from

!

Multi Channel Systems MCS GmbH, and only for the specified purpose. Damage of
the device and even injuries can result from improper use.

Multi Channel Systems
MCS GmbH

Aspenhaustrasse 21
72770 Reutlingen
Germany

Fon [phone]­Fax

[phone]

[e-mail]
www.multichannelsystems.com

0

2013 Multi Channel Systems MCS GmbH

Product information is subject to change
without notice.