Multichannel Systems HE-Up-BC User Manual

HE-UP-BC
Heating element for MEA1060-UP-BC amplifier
Installation
1.) You need the heating element (HE-Up-BC), the connector board (HE-Up-BC-Con) to the temperature controller TCX, and four provided screws each.
HE-Up-BC
HE-Up-BC-Con
2.) Mount the heating element onto the recessed space of the amplifier’s bottom. Make sure the input pins go through the hole.
Multi Channel Systems MCS GmbH
Aspenhaustrasse 21 72770 Reutlingen Germany
Fon +49-7121-9 09 25­Fax
info@multichannelsystems.com www.multichannelsystems.com
0
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change without notice.
HE-UP-BC
Heating element for MEA1060-UP-BC Amplifier
Installation
3.) Screw the heating element (HE-Up-BC) tightly from the other side with the provided four bigger screws (M3x6).
4) Mount the connector board (HE-Up-BC-Con) so that all six pins are connected to the heating element. Tighten it with the provided four smaller screws (M2x4).
Scope of delivery: 1 HE-Up-BC + 4 screws (M3x6) 1 HE-Up-BC-Con + 4 screws (M2x4)
Multi Channel Systems MCS GmbH
Aspenhaustrasse 21 72770 Reutlingen Germany
Fon +49-7121-9 09 25­Fax
+49-7121-9 09 25-11
info@multichannelsystems.com www.multichannelsystems.com
0
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change without notice.
Loading...