Multichannel Systems HE-Inv-25 User Manual

HE-Inv-8 HE-Inv-12
HE-Inv-25

Heating Element with PT100 Sensor for MEA1060-Inv
and MEA1060-Inv-BC Amplifiers

(The number in the product name 8, 12 and 25 defines the diameter of the bore hole in the middle
of the amplifier for the invert microscope).

Heating Element

Back side Front side

For installation you need the heating element
HE-Inv-8 (or HE-Inv-12 or HE-Inv-25)
and 8 provided screws.

Installation:

1. Turn the ground plate of MEA1060-Inv
(or MEA1060-Inv-BC) amplifier upside down.

2. Mount the heating element carefully with back
side up and with all 8 srews onto the ground
plate of the MEA amplifier.

3. Connect the plug socket of the heating element
and save the cable at the rim of the amplifier’ s
ground plate with 2 screws.

Warning: The device may only be used together with the MEA1060-Inv and

!

MEA1060-Inv-BC from Multi Channel Systems MCS GmbH, and only for the specified
purpose. Damage of the device and even injuries can result from improper use.

Scope of delivery:
1 HE-Inv-8 OR: 1 HE-Inv-12 OR: 1 HE-Inv-25
8 srews (M3 x 5)

Multi Channel Systems
MCS GmbH

Aspenhaustrasse 21
72770 Reutlingen
Germany

Fon [phone]­Fax

[phone]

[e-mail]
www.multichannelsystems.com

0

© 2011 Multi Channel Systems MCS GmbH

Product information is subject to change
without notice.