Multichannel Systems HE-256MEA-9well User Manual

HE-256MEA HE-256MEA-8 HE-256MEA-12 HE-256MEA-25 HE-256MEA-9well

Heating Elements with PT100 sensor for USB-MEA256-System

The heating elements are adapted to the requirements of the microscopes and to the 256-9wellMEA which are used together with the USB-MEA256-System. A heating element without bore hole is for upright microscopes, a heating element with bore hole is for inverted microscopes. Diameters of 8, 12 and 25 mm for the bore holes are available. The heating element with nine small bore holes is for use with an inverted microscope and the 256-9wellMEA.

HE-256MEA

without bore hole for upright microscopes.

HE-256MEA-8 (-12 / -25)

with 8 mm bore hole for inverted microscopes. HE-256MEA-12 and HE-256MEA-25 have 12 mm and 25 mm bore holes, respectively.

Scope of delivery: 1 HE-256MEA; 8 screws (M3x5)

HE-256MEA-9well

Scope of delivery: 1 HE-256MEA-8; 8 screws (M3x5) Scope of delivery: 1 HE-256MEA-12; 8 screws (M3x5) Scope of delivery: 1 HE-256MEA-25; 8 screws (M3x5)

with nine 4 mm bore holes for use with inverted microscopes and the 256-9wellMEA.

Multi Channel Systems MCS GmbH

Aspenhaustrasse 21 72770 Reutlingen Germany

Scope of delivery: 1 HE-256MEA-9well; 8 screws (M3x5)

Fon +49-7121-9 09 25Fax

+49-7121-9 09 25-11

info@multichannelsystems.com www.multichannelsystems.com

Product information is subject to change without notice.

HE-256MEA-9well

Installation of the HE-256MEA-9well exemplary for all heating elements

1.) Please open the lid of the amplifier and turn the USB-MEA256-System upside down. Place the system on a soft surface, that the open lid will not be damaged. Unscrew the cover and remove the present heating plate.

Cover

2.) Be careful not to touch the marked area.

3.) Place the HE-256MEA-9well heating plate onto the amplifier with the golden element facing to the amplifier.