![](/html/d3/d342/d3423621f072f03e4954781a43abaac4819c7179b8e4e6f3cafae0dcab303847/bg1.png)
ADPT-NN-54
54-Electrode NeuroNexus Probe
Adapter for MPA32I Amplifiers
Connecting two MPA32I to the ADPT-NN-54
Complete setup with two MPA32Is
Top view
IN/OUT 2
IN/OUT 1
MPA32I No. 1
MPA32I No. 2
The IN / OUT sockets 1 and 2 can be used as output connectors, for connecting single channels to other
devices, or as input connectors, for connecting other signal sources.
Side view
Connect MPA32I No. 1 here
Connect MPA32I No. 2 here
Important: Connect both MPA32I with the screws face down as shown in the picture above.
Important: Connect both MPA32I with the screws face down as shown in the picture above.
Otherwise, the miniature preamplifiers will not work.
Otherwise, the miniature preamplifiers will not work.
Top
Bottom
The side with no screws is considered to be to top side of the MPA32I
Warning: The device may only be used together with the MPA32I from Multi Channel Systems
!
MCS GmbH and the 54-channel probe from NeuroNexus, and only for the specified purpose.
Damage of the device and even fatal injuries can result from improper use.
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25Fax
+49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
0
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
![](/html/d3/d342/d3423621f072f03e4954781a43abaac4819c7179b8e4e6f3cafae0dcab303847/bg2.png)
ADPT-NN-54
54-Electrode NeuroNexus Probe
Adapter for MPA32I Amplifiers
Pin Layout
Adapter to 54-electrode NeuroNexus probe
MPA32I No. 1, IN / OUT 1
1
5
3
9
7
11
13
15
17
19
21
23
25
27
29
31
33
35
GND 1210 8 6 4 2 27252315171921 REF
RE F 13 11 9 7 5 3 1 26 24 14 16 18 20 22 GND
2
6
4
10
8
12
14
16
18
20
22
24
26
28
30
32
34
36
MPA32I No. 2, IN / OUT 2
1
5
3
9
7
11
13
15
17
19
21
23
25
27
29
31
33
35
GND 2829314139373533434547495153 REF
REF 30324038363442444648505254 GND
2
6
4
10
8
12
14
16
18
20
22
24
26
28
30
32
34
36
Numbers in italics are the MPA32I pin numbers.
The electrode numbers are aligned to the input pins of the MPA32I.
Polytrode: electrode numbers
23 24 25 26 27 28 29 30 31 32
22 33
21 34
20 35
19 36
18 37
17 38
16 39
15 40
14 41
13 42
12 43
11 44
10 45
946
847
748
649
550
451
352
253
154
32-Channel Miniature Preamplifier (MPA32I) inputs
21
19
17
15
13
1 9
3
4
7
5
8
6
11
102
12
16
14
Pin 1:
Pin 2:
Pin 3 - 34:
Pin 35:
Pin 36:
22
20
18
GND (ground)
REF (reference)
Channel 1 to 32
REF (reference)
GND (ground)
23
28
26
24
31
30
32
35
343336
29
27
25
Important: Operation of the MPA32I is differential. REF has to be connected for obtaining a proper signal.
Please see the MPA32I manual for details.
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25Fax
+49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
0
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.