Multichannel Systems ADPT-FM-32 User Manual

ADPT-FM-32

FlexMEA36 Adapter for
32-Channel Miniature Preamplifiers MPA32I

Connecting the FlexMEA36 via Adapter ADPT-FM-32 to the MPA32I.

Plastic
Spacer

FlexMEA36

MPA32I

ADPT-FM-32

MPA32I: The side with no screws is considered the top side of the MPA32I.

ADPT-FM-32: If the adapter ADPT-FM-32 is oriented as shown in the figure, the FlexMEA36

must be inserted with the contact pads facing downward. Open the white drawer of the adapter.

FlexMEA36: Insert the FlexMEA36 carefully into the drawer of the adapter.
Please use the plastic spacer to fix the FlexMEA36 in the drawer of the adapter ADPT-FM-32,
and to ensure the contact.

Plastic Spacer: Insert the plastic spacer carefully into the drawer of the adapter.
The plastic spacer should be placed in the opposite side of the contact pads of the FlexMEA36,
otherwise the connection will be interrupted.

Close the white drawer of the adapter ADPT-FM-32.

If you like to use the FlexMEA36 together with the standard 32-channel miniature preamplifier MPA32I,
you need the ADPT-FM-32 adapter to connect the FlexMEA36 to the standard MPA32I.

There is no need for an adapter if you use the 32-channel miniature preamplifier MPA32I-Flex,
which is specified for FlexMEAs. Please read the MPA32I-Flex manual for more information.

Multi Channel Systems
MCS GmbH

Aspenhaustrasse 21
72770 Reutlingen
Germany

Fon [phone]­Fax

[phone]

[e-mail]
www.multichannelsystems.com

0

© 2011 Multi Channel Systems MCS GmbH

Product information is subject to change
without notice.