muLOGIC RSA-1 20, RSA-1220, RSA-1120, RSA-4x22 Series Manual

Hardware and start-up guide

© Copyright 2016-2018

3905KZ, Veenendaal, The Netherlands

RSA-1X 20

I NDUSTRIAL R EMOTE

A CCESS R OUTER

( SOFTWARE V ERSION 2.1)

Issue 1.2
October 2018

MuLogic B.V.
Plesmanstraat 58D

RSA-1120, RSA-1220 Industrial Remote Access Router

Compliances

CE Compliance

• EMC: Directive 2004/108/EC (EN 55022, EN55024)

• Safety: Directive 2006/95/EC (EN 60950)

The RSA series of routers complies with EMC directive 2004/108/EC and is
classified for use in Residential areas. Test standard: EN 55022 Class B

The RSA series also complies with the Immunity standard for ITE equipment
EN 55024 with the applicable test levels increased to levels compatible with
Industrial standards (ref. EN 61000-6-2).

About this user guide

Although this user guide was written with greatest possible care, omissions and
errors cannot be precluded.
MuLogic BV accepts no liability for any inaccuracies that may be found.
However, if you have comments or suggestions about this guide, please don’t
hesitate to contact us in order to help us to improve our product documentation.

Use of open source software

The firmware of the RSA series partly contains open source software that was
written under GNU General Public Licence (GPL). The source code of this open
source software can be made available on request.
Contact MuLogic for more information.

Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Website: www.mulogic.com

© MuLogic BV, 2016-2018

This guide is for information purposes only. All design characteristics,
specifications, etc. are subject to change without notice.
No part of this publication may be reproduced, transmitted, transcribed, stored
in a retrieval system or translated into any human or computer language in any
form by any means without the prior permission of MuLogic BV.

Issue No 1.2 (October 2018)

Contents

Introduction ........................................................................................................ 7

RSA-1120(W3/W4), RSA-1220(W3/W4) ......................................................... 7

Features ........................................................................................................... 7

Hardware Details and Installation .................................................................... 9

LED Indicators ................................................................................................. 9

Controls .......................................................................................................... 10

Reset button ............................................................................................... 10

Connectors ..................................................................................................... 11

Power connector ........................................................................................ 11

I/O connector .............................................................................................. 11

RS-485 connector ...................................................................................... 12

RS-232 Connector ...................................................................................... 13

DSL Connector ........................................................................................... 13

Ethernet Connectors ................................................................................. 14

Antenna Connector .................................................................................... 14

SIM Card slot (W3/W4-versions only) ............................................................ 14

Installation ...................................................................................................... 15

Configuration access ...................................................................................... 17

Introduction .................................................................................................... 17

Configuration interfaces ............................................................................. 17

Default settings ........................................................................................... 17

First time Login ........................................................................................... 17

Device Info page ........................................................................................ 18

Configuration .............................................................................................. 18

Command line access ................................................................................ 18

Technical Specifications ................................................................................. 19

Supported DSL Standards ............................................................................. 19

Wireless WAN modes (W3/W4 versions only) ............................................... 19

Ethernet ports................................................................................................. 19

Serial ports ..................................................................................................... 20

I/O Contacts ................................................................................................... 20

xDSL Line connection .................................................................................... 20

Power supply.................................................................................................. 20

Mechanical and environmental characteristics .............................................. 21

Hardware Version indication format ............................................................... 21

Appendix .......................................................................................................... 23

Mounting instructions ..................................................................................... 23

Cross Cables for connection to a device with RS-232 DCE port................... 24

Industrial remote access router - RSA-series User Guide – Introduction

1

Introduction

RSA-1120(W3/W4), RSA-1220(W3/W4)

Industrial DSL/WWAN routers for Remote Site Access.

The MuLogic RSA series of routers is designed for access to
remote locations such as power substations, traffic management
systems and similar remote equipment.

The products are primarily intended for access via ADSL or VDSL2
services while using mobile cellular WWAN networks for back-up,
should the DSL service fail.

The “W3” versions are equipped with an internal 2G/3G cellular
modem, the “W4” versions have a 2G/3G/4G cellular modem.

Features

• Access routers with multiple WAN ports: ADSL, VDSL2, Ethernet and
mobile wireless WAN (WWAN). (Note: depending on model).

• DSL port supports ADSL, ADSL2, ADSL2+ and VDSL2*.
*(RSA-1220 models only).

• One hardware/software version for ADSL Annex A (PSTN overlay) and
Annex B (ISDN overlay.

• ADSL rates: up to 25 Mbit/s downstream, up to 3.5 Mbit/s upstream.

Page 7

• VDSL rates: up to 100mbit/s downstream, up to 50 Mbit/s upstream.
(RSA-1220 models only).

• Wireless WAN: W3-versions: 2G/3G, 5-Band UMTS, 4-Band GSM.
(Worldwide use).
W4 versions: 2G/3G/4G versions: 5-band LTE, 3-band UMTS, Dual band
GSM. (USA-bands versions available on request)

• ADSL ATM Encapsulation protocols: PPPoA, PPPoE, IPoA, IPoE and

Layer-2 bridging.

• VDSL PTM protocols: PPPoE with or without VLAN ID and Layer 2 bridging.

(RSA-1220 versions only).

User Guide – Introduction Industrial remote access router - RSA-series

• Automatic Network Failover operation between DSL, Ethernet-WAN and
Wireless WAN ports.

• Ethernet port supports 10/100baseT, Auto-MDI/MDIX.
All Ethernet port can be used as LAN or WAN port.

• IEEE 802.1Q VLAN support for VDSL2/PTM, LAN and WAN Ethernet
interfaces.

• LAN side Ethernet switch can be configured as Hub for monitoring
purposes.

• Two Serial Port Gateways for remote serial data (TCP/IP or UDP/IP).

• Two serial ports (one RS-232, one RS-485) for data rates from 300 to

115200 bit/s.

• Support for SCADA protocols like Modbus RTU/ASCII, Modbus/TCP,
DNP3, DNP3/IP, IEC60870-5-101and IEC60870-5-104.

• IPsec and OpenVPN tunnels for secure access and data transport.

• OpenVPN bridged (layer 2) and routed (Layer-3) modes.

• GRE tunnels for linking multicast protocols like RIPv2 and OSPF

over IPsec.

• Internal DHCP server, DNS gateway and Dynamic DNS client.

• Static routing and dynamic routing (BGP, OSPF, RIPv1 and RIPv2)

• NAT features: Dynamic NAT (IP masquerading) and NAPT (Port

forwarding)

• Stateful firewall for Access Control, Forwarding control, NAT routing and
port forwarding.

• Device Management: HTTP/HTTPS, Telnet/SSH, SNMP and serial
command port.

• Alerts for system events by means of Email, SNMP traps, SMS, Dry contact
and LED

• Independent watchdog/reset controller for monitoring vital system functions
to guarantee automatic failure recovery.

• Dry contact sensor (input) and dry contact for status/alarm indication and
remote control.

Page 8

• Isolated supply voltage input for industrial applications (suitable for low
Voltage AC and DC).

• Extended operating temperature range: -40°C to +70°C.

• Rugged metal housing for DIN-rail or panel mounting..