MUELLER CO. DH-5 Operating Instructions Manual

opERAtinG inStRUctionS MAnUAL

MUELLER

®

GAS

DH-5
Drilling
Machine

TABLE OF CONTENTS PAGE

General Information 2-3

Operating Instructions 4-5

Parts Information 6-7

!

WARNING:

1. Read and follow instructions carefully. Proper training and periodic
review regarding the use of this equipment is essential to prevent possible
serious injury and/or property damage. The instructions contained

herein were developed for using this equipment on ttings of Mueller

manufacturer only, and may not be applicable for any other use.

2. Do not exceed the pressure ratings of any components or equipment.
Exceeding the rated pressure may result in serious injury and/or property
damage.

3. Safety goggles and other appropriate protective gear should be used.
Failure to do so could result in serious injury.

4. Pressure test, check for and repair leaks in all ttings and components

each time one is installed or any joint or connection is broken. Failure

to nd and repair a leak from any source in the ttings, by-pass lines

or equipment could result in an explosion and subsequent serious injury
and/or property damage.

5. MUELLER® Drilling Machines and Equipment have been carefully
designed and engineered to work together as a unit. The use of equipment
manufactured by someone other than Mueller Co. may cause excessive
wear or a malfunction of the MUELLER machines.

Reliable Connections

Customer Service Center

Decatur, Illinois

800.798.3131

www.muellergas.com

[e-mail]

All warranties, expressed or implied, for Mueller Drilling Machines are

rendered null and void if the machines are used with shell cutters or

equipment manufactured by someone other than Mueller Co.

TM

2

3

3