MODEL 620WE
IN-WALL ENCLOSED LOUDSPEAKER
OWNERS MANUAL
FIRST
CLASS
STAMP
HERE
4545 E BASELINE RD
PHOENIX AZ 85040-6400
21A3087
CONGRATULATIONS
We appreciate your choice of MTX In-Wall Loudspeakers. Properly
installed and operated, MTX In-Wall Loudspeakers should provide
years of worry free listening pleasure. It’s important that you follow
each step in this guide carefully to insure proper installation. If you
have any questions regarding MTX In-Wall Loudspeakers, please
call us at 1-800-223-5266.
SPECIFICATIONS
Frequency Response 62-20kHz
Impedance 4 Ohms
Nom. Power Handling 55 Watts
Peak Power Handling 180 Watts
Sensitivity 82dB@1W/1m
Woofer Diameter 6-1/2”
Tweeter 1” Soft Dome
Mounting Depth 3.709”
PAINTING YOUR MTX IN-WALLS
MTX In-Walls are designed to accept all types of interior and
exterior paints. Spray or roller application should provide excellent
results. A paint shield is included with all Blueprint Series In-Walls to
protect the speakers during the painting process.
WARRANTY
MTX Blueprint Series In-Wall Loudspeakers are guaranteed
against defects in parts and workmanship for a period of ten (10)
years from the date of purchase. Speakers found defective
during that period will be repaired by MTX without charge for
parts.
This warranty is void if it is determined that unauthorized
parties have attempted repairs or alterations of any nature.
Before assuming that a defect is present in the loudspeakers, be
certain that all associated equipment is operating properly.
If a defect is present, your authorized MTX dealer may be
able to effect repairs. If not, you are responsible for providing
transportation to the factory. Your MTX dealer can recommend
the safest method of transportation. Proof of purchase is required
when requesting service, so please retain your sales slip.
Specifications subject to change without notice.
(Cut out on dotted line and mail to address on reverse side.)
WARRANTY REGISTRATION
To register your purchase and insure your investment, please fill out and
return this card.
NAME_______________________________AGE______________
ADDRESS______________________________________________
______________________________________________
MODEL PURCHASED: MODEL 620WE
DATE PURCHASED____________________
DEALER NAME ________________________________________
PURPOSE:
Main Music Listening Background Video/surround
Other__________________________________________________
ROOM(S) INSTALLED ______________________________________
INSTALLED BY ____________________________________________
HOW DID YOU FIRST LEARN OF MTX IN-WALLS?
Dealer Friend Magazine Radio Newspaper Other
COMMENTS ___________________________________________
FEATURES
The Model 620WE in-wall enclosed loudspeaker is a unique
design unlike any other before it. It allows you to bring concertquality sound to virtually any area of your home that may have
been previously off-limits because of building code restrictions or
weather conditions.
The Model 620WE utilizes its mounting wings to mount into a
wall like conventional in-wall speakers, while incorporating an
integral enclosure to provide a vapor barrier between you and the
outside world.
The long excursion, high performance woofer was
designed specifically to work with its integral enclosure to insure
deep, accurate bass. While the soft dome tweeter perfectly
complements the woofer with its sweet sound and well-controlled
off-axis frequency response. The tweeter is also designed to pivot
which allows you to “aim” the high frequencies.
All of the Model 620WE components have been
manufactured with high quality, weather resistant materials. This
completes the Model 620WE’s package of versatility, performance
and durability.
LOUDSPEAKER PLACEMENT
Blueprint Series Loudspeakers are designed to work within any interior
decorating scheme. They can be installed in virtually any location where
flush mounting is possible. To maximize their sound performance however
certain guidelines should be followed. For the best stereo reproduction the
two loudspeakers should be placed an equal distance from your listening
position and separated so that the angle between them, at the listening
position, is between 40 and 60 degrees.
For best stereo imaging, we recommend that the units be placed so that
the tweeters are as close as possible to the ear level of a seated listener.
As this is not always possible in keeping with aesthetic design of a
particular room, the Model 620WE loudspeaker is designed with a pivoting
tweeter which rotates to allow you to “aim” the high frequencies toward
the listening position.
OTHER HOME AUDIO PRODUCTS FROM MTX
MTX offers a wide assortment of audio components. Ranging from
in-ceiling speakers to amplifiers to accessories. Each component
is value engineered and must meet strict quality control standards
before it becomes part of the MTX product line.
Listed below you will find a sampling of components available
from your authorized MTX dealer.
LPS-600
Speaker/Amplifier Selector
Accommodates up to 6 pair of speakers
Handles up to 250 watts/channel continuous (RMS)
Impedance Protection Circuitry
Accommodates up to 14 gauge wire
MODEL MP42
Multi-Purpose Loudspeaker
Two 4” Woofers, with 1/2” Balanced Dome Tweeter
50 Watts RMS/200 Watts Total Power Handling
Magnetically shielded, weather resistant
Sleek, Euro-style design
Available in white or black
12.6” x 4.8” x 4.9”
PS15
15” Powered Subwoofer System
200 Watt Class D Switching Power Amplifier
Infrared Remote Control for Volume Function
Magnetically Shielded, Downfiring Subwoofer in small enclosure
Signal Sensing Auto Turn On
Red LED Clipping Indicator
Speaker and Line Level Inputs
Continuously variable 50Hz to 150Hz, 24dB/Octave Crossover
Frequency Response 30Hz - 150Hz
17.2” H x 17” W x 20.25” D
Normal Dispersion
Dispersion After Tweeter Adjustment
STEP 1
Using a stud finder (available at low cost at most hardware stores)
or other accurate method, locate center point between two
studs and mark. Using template provided, trace hole pattern on
surface of wall.
STEP 2
Using a sabre saw, keyhole saw or very sharp utility knife, cut hole
in wall, following traced pattern.
STEP 3
Run loudspeaker wires to sound source location. There are several
methods you can use to accomplish wiring, depending on the
construction characteristics of the room or house. You can add a
professional touch to your installation by using a speaker terminal
plate at the source location. Leave sufficient amount of wire at
speaker location (8 to 10 inches) to complete connection.
STEP 4
Attach loudspeakers wires to speaker terminals, observing correct
polarity (positive to positive and negative to negative). Insert the
speaker into the mounting hole. Be careful not to pinch the
loudspeaker wires in the process. using the integral bubble levels
located on the baffle, align the speaker’s frame either horizontally
or vertically. Once you are satisfied with the speaker’s location,
tighten the eight mounting wings located near each corner of
the frame using a phillips screwdriver. The mounting wings are
designed to swing into position when you start tightening.
Note:
the phillips head screws are for tightening the mounting wings.
The torx head screws are for the enclosure which should not be
tightened or loosened.
STEP 5
After speaker panel is secured tightly, test for sound.
STEP 6
When you are satisfied the speaker is operational, “aim” the
tweeter, and affix grill. As grill is designed for a snug fit, you’ll need
to position one edge into the slot first, and press or squeeze
around perimeter of thegrill, while pushing the leading edge into
the grill slot.
Loading...