MTX MUDHSB Owner's Manual
OWNER'S
MANUAL
MUDHSB
MTX.COM
HANDLEBAR
mJ~
Near
Field
AUDIO
0
Bluetooth·
Communication
SYSTEM
IMPORTANT
you have any questions regarding
It
at 1-800-225-5689.
connecting power and ground wires ensure that the red power wire is fused at the point
When
connected to the
where it
short circuit
is
develops
NOTICE
wire
vehicle's
between the vehicle
battery. Failure
routing in a
connection point and the product.
vehicle, please
can result
so
do
to
contact MTX
damage to the
in
PRODUCTINFORNIAnON
Model#
Serial#
Dealer's
Date of
------------------------------Name-----------------------------
Purchase
----------------------------
Technical Support
a
vehicle
it
THE
IN
• MUDHSB-B Handlebar Audio System
• Installation Cables (Power/Ground/Ignition and
• Universal
BOX
Mounting
(Patent Pending)
Power Protection Module)
Clamps (Patent Pending)
INTRODUCTION
Thank you for purchasing this MTX Audio MUDHSB-B Handlebar Audio System that
with most
work
to
tablets. This easy to
mobile
between
device into the center of your
"
Vs
Bluetooth enabled
V4".
and 1
devices including iPhone®
one unit
in
and use,
install
Congratulations and enjoy the
all
vehicle's
audio system.
capable
is
ultimate
and Android® smartphones and
of transforming your
is designed to mount a variety of bars
It
audio experience
Bluetooth enabled
with
FEATURES
High Frequency Tweeters
Range Speakers and Four
Full
3"
x
2"
Two
•
• All-Weather
• Integrated Bluetooth
• Auxiliary Input
• Auxiliary Output
• Patent Pending Universal
• Power,
Automated
•
Construction
tor Connecting Devices
tor
Ground,
Ignition Wire, and
Bluetooth Pairing
Receiver
Connecting An External Amplifier
In
Use
tor
Mounting
NFC
via
12V
1"
Almost
Via
Clamps
Trigger
Any Environment
3.5mm
Cable
Additional
or
Fit Bars Between
Output Included
Sound Bar
114"
and 1
Ys"
Easy Installation
for
designed
is
MTX!
@@
0
0
cPn'1lih"n~'W.f.
a
e e
la
@®
MUDHSB-B
2
MTX.COM
ELECTRICAL
1.
Tap
the Power button to turn the unit
to a
12V
power
2.
Tap
the Power button to switch modes between Bluetooth and AUX.
3.
Hold
the Power button for 2 seconds to turn the unit
as
long
as
the Ignition wire has
4.
The integrated fuse and ring terminals allow
5. The remote turn
Note:
The indicator light
Warning:
harness.
Do
not remove the Power Protection Module (black box) next to the fuse
OPERATION
source.)
on
(blue wire) only
will illuminate Blue
on.
(Power, Ground, and Ignition wire need to
12V
applied to it.
operates when the unit is powered
when
OPERATION
Follow
1.
2.
3.
4.
5.
these steps to utilize the Bluetooth functionality using a Bluetooth
Power the unit
Select Bluetooth by tapping the Power button
Select
on
(vehicle is turned off and then turned on) the unit
AUX setting.
Choose
Once
"MTX
in
Bluetooth mode first when it is turned
"Pair"
"Paired"
On
by tapping the Power button once.
Sound
Bar"
from the menu
when prompted.
the unit will
be
able
on
to play
Off.
Note:
The buttons
for
easy wire connection to a
in
Bluetooth mode and Green when
until
it
blinks
Blue.
your Bluetooth enabled device. The unit
on
by tapping.
will
audio from your Bluetooth device.
If
the Ignition wire
revert back to the previous Bluetooth or
will
12V
on.
enabled
is
stay
power source.
device:
disconnected,
be
illuminated
in
on
the
will
connected
AUX mode.
wire
power
The
front
panel control buttons
Play/Pause button
Follow
1.
2.
3.
4.
5.
Follow
1.
2.
3.
The
will
Using the auxiliary output.
1.
2.
3.
these steps to utilize Bluetooth in a
Power the unit
Select Bluetooth by tapping the Power button
Tap
the
NFC
Choose
Once
Power the unit
Select Auxiliary by tapping the Power button
Connect
The
front
mute the audio output and the
Auxiliary out is a variable output
an
The MUDHSB-B can
second unit connected via Auxiliary should have the volume set to the max.
The blue
"Pair"
"Paired"
these steps
an
LED
will
panel
external amplifier connected to speakers or subwoofer.
wire
will
mute the output and the
On
by
tapping the Power button once.
enabled device
when prompted.
the unit will
to
utilize
On
by tapping the Power button once.
audio device to the AUX input using the
illuminate
control buttons
be
on
the
wire
will
control
on
the (left)
be
able
an
Auxiliary input device:
Green, and
will
adjust the Volume up/down
LED
Output
used with a second MUDHSB-B unit. For the best audio performance, the
marked
that
harness can
track
forward/back and volume
LED
indicator
NFC
(Near Field Communication) enabled device:
until
it
blinks Blue.
side of the enclosure (marked
to play
will
audio from your
until
it
blinks Green.
"Green"
blink Green when
indicator
allows
will blink
on
(left) side of enclosure.
connection to a secondary audio device,
be
used
as
a remote turn
in
Green when
will
blink Blue
NFC
device.
3.5mm input
mute mode.
in
this mode. The Play/Pause button
in
on
for the second audio device.
up/down
when
in
Mute mode.
by
NFC
label).
on
the side of the unit.
Mute mode.
in
this mode. The
whether
it
is
Controlling
The
LED
the Volume
indicator
light
will
blink
in
both Bluetooth and AUX modes
MTX.COM
at
max volume.
3
Loading...