MTX MPP4200 Owner's Manual

MPP4200 OWNERS MANUAL

1 Mitek Plaza

Winslow, IL 61089

815-367-3000
800-225-5689

MTX WARRANTY INFORMATION

All MPP4200 Speaker Cabinets purchased in the United States from authorized MTX dealer are guaranteed
against defects in material and workmanship for a period of ONE YEAR from the date purchased by the end
user, and limited to the original retail purchaser of the product. Product found to be defective during that period
will be repaired or replaced by MTX at no charge.

This warranty is void if it is determined that unauthorized par­ties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or finish. Before
presuming a defect is present in the product, be certain that all related equipment and wiring is functioning
properly. MTX disclaims any liability for other incurred damages resulting from product defects. Any expenses
incurred in the removal and reinstallation of product is not covered by this warranty. MTX's total liability will not
exceed the purchase price of the product. If a defect is present, your authorized MTX dealer may be able to
effect repairs.

Proof of purchase is required when requesting service, so please retain your sales receipt and take a moment
to register your product on line at mtx.com.

21A8461

CONGRATULATIONS

...on your purchase of MTX Multi-Purpose Loudspeakers. Your new loudspeakers represent
years of thorough research and development in the most modern techniques of speaker
design and engineering. Using advanced technology and high quality electronics and com

-

ponents, MTX loudspeakers assure you of exceptional performance and value.

Your speakers were examined very carefully during and after manufacturing to assure all
quality standards were met or exceeded. If damage as a result of shipping and handling has
occurred, please contact the shipper or your dealer immediately.

Thank you for selecting MTX when you made your audio equipment purchase.

SPECIFICATIONS MPP4200

Frequency Response (F3) 105Hz-20kHz
(F6) 90Hz-20kHz
(F10) 85Hz-20kHz

Nominal Impedance 8 Ohms

Power Handling 100W RMS
200W Peak

Sensitivity (2.83v/1m) 88dB

Woofer Dual 4”

Tweeter 30mm Teteron

Dimension
(H X W X D): 25” X 5 1/4” X 3 3/4”
(4 1/4”D w/bracket)

INTRODUCTION

The MTX MPP Series may be the most comprehensive loudspeaker design ever conceived.
The unparalleled application flexibility afforded by this design gives you the freedom to listen
to music almost anywhere and in just about any possible configuration.

PAINTING

Carefully remove the spring clip on the back of the grille logo and remove the logo. Mask
the baffle area of the speaker cabinet out to the grille mounting groove. Almost any type of
paint can be used but best results will be had using a quick drying enamel or lacquer spray
paint. For best results always follow the paint manufacturers recommendations for proper
application. After painting the cabinet, grille and applicable end caps allow the paint to dry
thoroughly.

NOTES