MTL Instruments MTL5099 Specifications

MTL5099 DUMMY

Unused
hazardous­area cores

3
2
1

6
5
4

7
8
9

10
11
12

13
14

Unused
safe-area
cores

ISOLATOR

The MTL5099 is used with other MTL5000 Series units to provide
termination and earthing facilities for, unused cable cores from
hazardous areas.

Safe areaHazardous

Terminal Function

1 Hazardous-area core
2 Hazardous-area core
3 Hazardous-area core
4 Hazardous-area core
5 Hazardous-area core
6 Earth
7 Safe-area core
8 Safe-area core
9 Safe-area core
10 Safe-area core
11 Safe-area core
12 Safe-area core

MTL5000 SERIES
COMMON
SPECIFICATION

Connectors

Each MTL5000 unit is supplied with signal and power connectors,
as applicable.
When using crimp ferrules for the hazardous and non-hazardous
(safe) signal connectors the metal tube length should be 12mm
and the wire trim length 14mm. For the power connectors the
metal tube length should be 10mm and the wire trim length
12m m.
See INM5000 for recommended ferrules.

Isolation

250V rms between input, output and power supply terminals,
tested at 1500V rms minimum between safe- and hazardous-area
terminals. MTL5073, output and power supply not isolated.

Location of units

Safe area

Terminals

Accommodate conductors of up to 2.5mm2 stranded or single­core

Mounting

On 35mm (top hat) rail to :
EN 50022–35 x 7.5; BS 5584;
35 x 27 x 7.3 DIN 46277

Ambient temperature limits

–20 to +60°C (–6 to +140°F) operating
–40 to +80°C (–40 to +176°F) storage

Humidity

5 to 95% relative humidity

Weight

110g approx (except where indicated)

EUROPE (EMEA) Tel: [phone] Fax: [phone]
AMERICAS Tel: [phone] Fax: [phone]
ASIA PACIFIC Tel: [phone] Fax: [phone]
E-mail: [e-mail] Web site: www.mtl-inst.com

DIMENSIONS

Hazardous-area
connections

110

Non-hazardous
(safe) area
connections

104

115

16.2 pitch
16

Powe r
connectors

Aug 2008