Page 1
4½"
5
65 "
Designer Collection Tubs
Madelyn 2
# 135
65.625" x 36" x 21.25"
GENERAL SPECIFICATIONS
Material - Acrylic
Installation - Drop-in or Undermount
Not recommended as a tub / shower combination.
Plumbed Weight - 135 lbs / 61 kg
Soaker Weight - 115 lbs / 52 kg
Average Fill - 40 gal to above jet level
Maximum Fill - 80 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
8
36"
3½"
1 4
2
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.
1¾"
54"
19 ½"
43"
IMPORTANT ORDERING & INSTALLATION INFORMATION
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subf loor.
• Radiance placed on airbath floor will affect placement of air jets.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Stream Bath
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 2-bhp pump x 2, inline heater, ozone 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath
Air Massage Elite w/ Stream Bath
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/ US; ANSI Z124.1 and ANSI 112.19.7
CSA # MTDS©2021 by MTI B aths, Inc. Mo difi catio n Right s Reser ved
135
½-bhp
½-bhp pump, heated blower
½-bhp pump, heated blower, chromatherapy
1-15 amp
1-15 amp
1-15 amp
23"
26 "
5
8
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
10 ¼"
32⁄
3
115°
20½"
21¼"
18"
100°
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 2-bhp pump x 2, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
See the Installation & Operation Manual for more details.
MTI's Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
1 of 3
2-bhp pump
x 2
chromatherapy
, inline heater, heated blower,
, ozone
IMPORTANT:
Air baths and tubs
with a pre-leveled
foam base or frame
system add 2-3" to
overall tub height.
Rev. 04 23 2021
2-20 amp
Loading...