Page 1
Designer Collection Tubs
"
65¾"
Andrea® 13
# 103
65.75" x 41.875" x 22.625"
GENERAL SPECIFICATIONS
Material - Acrylic
Installation - Drop-in or Undermount
Plumbed Weight - 135 lbs / 61 kg
Soaker Weight - 100 lbs / 43 kg
Average Fill - 68 gal to above jet level
Maximum Fill - 114 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
3
31¾"
33¼"
4"
8¼"
1
Optional Integral Armrests
4¼"
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Shown with Air Massage and Ultra Whirlpool Package.
55"
7
21
"
8
19"
41½"
7¼"
27¼"
13 "
32
2½"
7
"
8
120°
94°
20
4
7
41
8
Compliance Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
2
5
22
"
8
7
"
8
CSA Certified C/US
IMPORTANT:
Air baths and tubs
with a pre-leveled
foam base or frame
system add 2-3" to
overall tub height.
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall
tub height is increased by approx. 2-3” and is designed to install on a flat, level subf loor.
• Radiance placed on airbath floor will affect placement of air jets.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
IMPORTANT ORDERING & INSTALLATION INFORMATION
Stream Bath
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 2-bhp pump x 2, inline heater, ozone 2-20 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath
Air Massage Elite w/ Stream Bath
Electrical requirements may change with the addition of optional therapy components.
See specific option details or installation information.
CSA Certified C/ US; ANSI Z124.1 and ANSI 112.19.7
CSA # MTDS©2021 by MTI B aths, Inc. Mo difi catio n Right s Reser ved
103
½-bhp
½-bhp pump, heated blower
½-bhp pump, heated blower, chromatherapy
1-15 amp
1-15 amp
1-15 amp
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 2-bhp pump x 2, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra
Whirlpool
See the Installation & Operation Manual for more details.
MTI's Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
1 of 3
2-bhp pump
x 2
chromatherapy
, inline heater, heated blower,
, ozone
2-20 amp
Rev. 04 23 2021
Loading...