MTI Baths MTIB1683 Specifications

Page 1
Designer Collection Tubs
16
60"
3 4
2"
8"
24¼"
22"
18½"
Andrea® 6
 # 96
60" x 32" x 18.25"
GENERAL SPECIFICATIONS
Material - Acrylic
Installation - Drop-in or Undermount
Plumbed Weight - 100 lbs / 45 kg
Soaker Weight - 75 lbs / 34 kg
Average Fill - 30 gal to above jet level
Maximum Fill - 57 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Pump and/or blower extends out 1¾" beyond tub deck.
32"
3"
Compliance Label
"
1
3½"
14 ½"
2
Optional Integral Armrests
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-1995
CSA Certified C/US
Numbered areas on tub deck represent possible locations
to install cleaning systems, faucets and other fixtures.
Pump extends out approximately 1 3/4" beyond tub deck.
Shown with Air Massage and Ultra Whirlpool Package.
14¼"
51¾"
46"
17½"
7¼"
120°
103°
18¼"
16 ½"
IMPORTANT: Air baths and tubs with a pre-leveled foam base or frame system add 2-3" to overall tub height.
IMPORTANT ORDERING & INSTALLATION INFORMATION
• Before ordering or installing, please consider future access to equipment.
• Add proper bedding compound to fully level and support bottom of tub.
• When equipped with an air bath package, pre-leveled foam base or frame system, overall tub height is increased by approx. 2-3” and is designed to install on a flat, level subf loor.
• Radiance placed on airbath floor will affect placement of air jets.
• System components may extend beyond the perimeter of deck.
• Please measure tub on-site before building tub decking.
• Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
• Suction and control locations may vary.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Stream Bath
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 2-bhp pump, inline heater, ozone 2-15 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath
Air Massage Elite w/ Stream Bath
Electrical requirements may change with the addition of optional therapy components. See specific option details or installation information. CSA Certified C/ US; ANSI Z124.1 and ANSI 112.19.7
CSA # MTDS­©2021 by MTI B aths, Inc. Mo difi catio n Right s Reser ved
96
½-bhp pump, heated blower
½-bhp pump, heated blower, chromatherapy
1-15 amp
1-15 amp
1-15 amp
Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower, chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 2-bhp pump, inline heater, heated blower, ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15 amp
Air Elite with Ultra Whirlpool
See the Installation & Operation Manual for more details. MTI’s Customer Service Monday-Friday 8am-6pm EST 800-783-8827 or service@mtibaths.com
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
2-bhp pump, inline heater, heated blower, chromatherapy ozone
,
2-20 amp
Rev. 04 23 2021
Loading...