Page 1
MTI BASICS® Tubs
50"
42¼"
17 "
12 "
16 "
5
8
3
8
60"
29¾"
25¼"
19"
20½"
8"
3¼"
15 "
5
8
14 "
7
8
50"
42¼"
17 "
12 "
16 "
5
8
3
8
15 "
5
8
MBRR6030E
59.75” x 29.75” x 17.375”
Installation: Drop-In
Material: Acrylic
Plumbed Weight: 109 lbs / 50 kg
Soaker Weight: 85 lbs / 39 kg
Average Fill: 28 gal to above jet level
Maximum Fill: 46 gal to overflow
Package
Soaker Soaking bath - No jets. Includes textured bottom.
12 air jets, heated air blower, pre-leveled foam base and
Air Bath
textured bottom.
pre-leveled foam base increases overall tub height 2”-3”
Whirlpool 6 point-massage jets, 1-bhp pump and textured bottom
Shown with Whirlpool Package
Package Content
Part #
MBSRR6030E
MBARR6030E
MBWRR6030E
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US
Options
Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump For
Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories
.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Installation Options
. Must be ordered at time of purchase.
Tile Flange
Factory-Installed rigid ABS
3 sides (MBTFK3), 2 sides (MBTFK2),
1 side (MBTFK1)
Must specify flange location(s) on order.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Pre-Leveled Frame and
Foam Base with Skirting
Raised Fixed Panel
5’ Tubs (MBFSKAO5), 5.5’ Tubs (MBFSKAO55),
6’ Tubs (MBFSKAO6)
Raised Removable Panels
5’ Tubs (MBFSKAR5), 5.5’ Tubs (MBFSKAR55),
6’ Tubs (MBFSKAR6)
Important Ordering and Installation Information
Before ordering or installing, consider access to equipment.
˚
Always measure tub on-site before building tub deck.
˚
Use proper bedding compound to fully level and support the tub.
˚
Tubs equipped with an air system or factory installed pre-leveled foam base are
˚
designed to install directly onto a flat level subfloor.
Tub height is increasd up to 3” when equipped with factory-installed foam base.
˚
Location of all therapy components is predetermined and cannot be changed.
˚
Options listed cannot be combined with Designer Collection options.
˚
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
CSA # MTIS-RR6030E
Eective 030121
Hydrotherapy Package Components Included
Soaker with Optional
Inline Heater
Whirlpool or Air Bath 1-bhp pump
Whirlpool with Optional
Inline Heater
Air Bath with Optional
Inline Heater
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
½-bhp pump, inline
heater
1-bhp pump, inline
heater
heated blower, ½-bhp
pump, inline heater
GFCI / 110V
1-15 amp
1-15 amp
1-20 amp
2-15 amp
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
©2021 by MTI Baths, Inc. Modification Rights Reserved.
Loading...