Page 1
MTI BASICS® Tubs
Pump extrudes
4”-5“ beyond
tub deck
59½"
8¾"
30"
54"
2¾"
3½"
3½"
2¾"
46¼"
112°
19"
AFR
12" 14¼"
22¾"
17"
Tile Flange
height is 1½”
MBISC6030A
59.5” x 30” x 19”
Installation: Alcove
Material: Acrylic
Plumbed Weight: 105 lbs / 48 kg
Soaker Weight: 85 lbs / 39 kg
Average Fill: 32 gal to above jet level
Maximum Fill: 39 gal to overflow
Package
Soaker
Air Bath
Whirlpool
Soaking bath - No jets. Integral front skirt, 3-sided integral
tile flange and textured bottom.
12 air jets, heated air blower, pre-leveled foam base and
textured bottom.
pre-leveled foam base increases overall tub height 2”-3”
6 point-massage jets, 1-bhp pump, integral front skirt,
3-sided integral tile flange and textured bottom.
Shown with Whirlpool Package
Package Content
Part #
MBSISC6030A
MBAISC6030A
MBWISC6030A
Options
Must be ordered at time of purchase.
Standard White (no charge)
Color Upgrade: Biscuit (MTISCOLOR)
Quick Ship / Priority
Soaker & Whirlpool (QSHIPMTIS)
Airbath (QSHIPMTISA)
Inline Heater
For Whirlpool (HTRMTIS) uses existing pump
For Soaker & Air Bath (MBHTI SOAK)
heater with recirculating pump
Accessories
.
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MWOW),
Brushed Nickel (MBWOBN)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB)
Roll-Up Pilow
Light Aqua (MBPRUC) Black (MBRUB)
Installation Options
. Must be ordered at time of purchase.
Pre-Leveled Foam Base
5’ Tubs (MBPLFOAM)
5.5’ & 6’ Tubs (MBPLFOAM2)
All airbaths include a pre-leveled foam base.
Important Ordering and Installation Information
Before ordering or installing, consider access to equipment.
˚
Integral flat front skirt is not removable.
˚
Must specify left- or right-hand drain when ordering.
˚
Use proper bedding compound to fully level and support the tub.
˚
Tubs equipped with an air system or factory installed pre-leveled foam base are
˚
designed to install directly onto a flat level subfloor.
Location of all therapy components is predetermined and cannot be changed.
˚
Suction and control locations may vary.
˚
Options listed cannot be combined with Designer Collection options.
˚
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Compliance
Label
Model MTXXXX
Made in USA
Complies with
ANSI Z124.1-
1995
CSA Certified C/US
Hydrotherapy Package Components Included
Soaker with Optional
Inline Heater
Whirlpool or Air Bath 1-bhp pump
Whirlpool with Optional
Inline Heater
Air Bath with Optional
Inline Heater
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
NOTE: Filling this tub to the maximum may require an
½-bhp pump, inline
heater
1-bhp pump, inline
heater
heated blower, ½-bhp
pump, inline heater
GFCI / 110V
1-15 amp
1-15 amp
1-20 amp
2-15 amp
above average size or dedicated water heater.
CSA # MTIS-ISC6030
Eective 030121
©2021 by MTI Baths, Inc. Modification Rights Reserved.
Loading...