MTE Matrix ONE Catalog

Single Phase

Matrix® ONE

Product Selector

Power quality you
can count on.

Extends the service life of
electrical equipment

Reduces system downtime

Easy to install and maintain

Increases energy efficiency

Three-year warranty

The Single Phase Matrix® ONE Filter provides
reliable harmonic protection in environments where
utility power may not be optimal. MTE has built the
Single Phase Matrix ONE Filter with time-tested
components to work in rural, remote areas where
three phase power is often not available. Its patented
technology reduces harmonic distortion allowing
your equipment to run with increased energy
efficiency and better overall THID performance.

The Matrix ONE is designed to generate less
heat and reduce system downtime. Easy to
install and maintain, the Single Phase Matrix
ONE produces the protection you need to
extend the service life of your equipment.

Improve power quality and reduce downtime with

Percent THID (%)

Matrix® ONE THID Reduction (%)

our optimized single phase harmonic filters.

The Single Phase Matrix® ONE Filter is proven to
produce harmonic mitigation for your VFD or other
single phase power applications.

Patented design with reliable components provides
harmonic mitigation and reduced THID (Total Harmonic
Distortion) where you need it most.

Low cost solution that is easy to install and maintain.

Performance that is able to withstand harsh and

remote conditions.

Extends service life of equipment by reducing heat, and
improving system efficiency.

Matrix®ONE

Alleviates system downtime by preventing blown fuses

and tripped circuit breakers.

Performance Specifications

Service Load Condition Load: typically a 4-pulse rectifier

Input Voltage

Maximum THID 12% @ Full Load

Maximum Ambient
Temperature

Insertion Load +10% no load; -10% full load

Efficiency 97% - 99%

Altitude Without Derating 3,300 feet above sea level

Relative Humidity 0% to 95% non-condensing

Overload 150% for 1 minute duration

Final product specifications subject to change at anytime.

240V +/- 10%; 60 + 0.75Hz; 1-phase
480V +/- 10%; 60 + 0.75Hz; 1-phase

-40C to +50C open panel filters;

-40C to +40C enclosed filters;

-40C to +90C storage

Utility Power

Matrix® ONE

Filters

VFD

Matrix® ONE THID Performance (%)

18

16

14

12

10

8

6

4

2

0

0 20 40 60 80 100

Percentage of Full Load (%)

Matrix® ONE Harmonic Spectrum Chart

70

60

50

40

30

20

Harmonic Current (%)

10

0

Harmonic Number (n)

Drive 100% Load Matrix ONE 100% Load

How to properly
size your filter

Harmonic
Filter

• Determine voltage, frequency, and number of
phases required

• Reference motor nameplate to determine motor
HP or KW and Full Load Amps

• Select filter based on Motor Full Load Amps

Do not exceed filter’s maximum

current rating (amps)

• Specify enclosure style
Open (No enclosure)

NEMA 1/2 (General Purpose Enclosure)
NEMA 3R (Outdoor Enclosure)

• Determine derating requirements
Reference Performance Specifications table

on previous page as well as derating tables
listed below:
Table 1: Drive Output Frequency Derating
Table 2: Altitude Derating Curve

Derating Curves:

Table 1: Drive Output Frequency Derating

Understanding the Matrix ONE Part Number:

MS X _ _ _ _ X

Matrix ONE

Enclosure Type

P = Open Magnetics (No Enclosure)
G = General Purpose (NEMA 1/2)
W = Weather (NEMA 3R)

Current Rating
0008 is 8 Amps
0090 is 90 Amps
0620 is 620 Amps

Voltage Frequency Code
A 240 Volts 60 Hz
D 480 Volts 60 Hz

Table 2: Altitude Derating Curve