MTE Matrix AP Catalog

Matrix® AP

Product Selector

Adapts to varying power loads

Best performance in the industry

Harmonic Filters

The key to success: adapt.

Simply put, our Matrix® AP is the most advanced
passive filter on the market today. Most traditional
filters work fine at 100% power load, but severely
underperform at lower loads. Matrix AP is different,
because we know almost no one runs at full load all
the time. Its patented Adaptive Passive Technology
virtually eliminates harmonic distortion by adapting
to varying power loads. It delivers better THID
performance, increases energy efficiency and
allows you to meet IEEE-519 requirements.

Extends the service life of
electrical equipment

Generator compatible

Performance guarantee

Its unique design generates less heat, and
is easy to install and maintain. Plus it is
generator compatible. With Matrix AP Harmonic
Filters, power quality, energy efficiency and
reduced downtime are easy to achieve.

Improve power quality and reduce downtime with our patented Adaptive Passive Technology.

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.0

10.5

11.0

11.5

12.0

12.5

13.0

13.5

0 10 20 30 40 50 60 70 80 90 100

Matrix AP - Generator Compatible
Competition A - Not Generator Compatible
Competition B - Not Generator Compatible
Competition C

The best-in-class Matrix® AP Harmonic Filters can
be specified for use on the input of your VFD or other
6-pulse rectifier power supply to enable your system to
meet the IEEE-519 requirements for harmonic distortion,
regardless of power load.

Features our patented Adaptive Passive Technology
for superior harmonic mitigation and better THID
performance over a wider load range.

MTE performance guarantee provides peace of mind
that the Matrix AP will meet or exceed performance
expectations - every time.

Extends service life of electrical equipment, especially
transformers and motors, due to the virtual elimination
of CEMF and the skin effect.

Matrix® AP

Alleviates system downtime by preventing blown fuses

and tripped circuit breakers.

Industry leading THREE year warranty because
the best products deserve the best warranty.

Performance Specifications

Service Load Condition Load: 6-pulse rectifier only

380V - 415V +/- 10%; 50 + 0.75Hz;
3-phase

Input Voltage

Maximum THID 8% @ 30% load; 5% @ full load

Maximum Ambient
Temperature

Insertion Loss @ Full Load <4%

Efficiency 97% - 99%

Altitude Without Derating 3,300 feet above sea level

Relative Humidity 0% to 95% non-condensing

Current Rating 150% for 1 minute duration

Final product specifications subject to change at anytime.

480V +/- 10%; 60 + 0.75Hz; 3-phase
600V +/- 10%; 60 + 0.75Hz; 3-phase
690V +/- 10%; 50 + 0.75Hz; 3-phase

-40C to +50C open panel filters;

-40C to +40C – 45C enclosed filters;

-40C to +90C storage

Utility Power

Matrix® AP

Filters

MTE vs. Competition THID [%]

Percent THID [%]

Percentage of full load [%]

Matrix AP Harmonic Filters can help ensure that your system
meets the IEEE-519 requirements for harmonic current.

VFD

How to properly
size your filter

• Determine voltage and frequency requirements

• Reference motor nameplate to determine motor
HP or KW and Full Load Amps

• Select filter based on Motor Full Load Amps
Do not exceed filter's maximum

current rating (amps)

Harmonic
Filters

Matrix AP Options

Contactor Option 002: Contactor for capacitor disconnect

• Includes NO/NC auxiliary contacts

• Wired to customer terminal block

• Pre-wired within enclosed part numbers

• Requires 120V 50/60Hz power source

Contactor Option 012: Contactor with control transformer
(Only available for enclosed filters)

• Option 002 including a 120 VAC control transformer

• Specify enclosure style
Open (No enclosure)
NEMA 1/2 (General Purpose Enclosure)
NEMA 3R (Outdoor Enclosure)

• Determine derating requirements
Reference Performance Specifications table on
previous page

• Select desired options (if applicable)

Understanding the Matrix AP Part Number:

MAP X _ _ _ _ X _ _ _

Matrix AP

Enclosure Type

P = Open Magnetics (No Enclosure)
G = General Purpose (NEMA 1/2)
W = Weather (NEMA 3R)

Current Rating
0006 is 6 Amps
0083 is 83 Amps
2300 is 2300 Amps

Contactor Option 009: Contactor with adjustable
pick up and drop out (Only available for enclosed filters)

• Includes NO/NC auxiliary contacts

• Includes a 120 VAC control transformer

• Includes two current operated switches

• Ability to adjust pick-up and crop current levels

• Switches are preset at factory

Pick-up is 35% of filter output current rating
Crop out is 20% of filter output current rating

Contactor Option 013: Filter bypass and capacitor
contactor with control transformer (Only available for
enclosed filters)

• Includes NO/NC auxiliary contacts

• Includes a 120 VAC control transformer

• Pilot relay provided to limit inrush current

• Jumper selection allows for single contact switching

(Normal bypass control with capacitor removal)

Option - 400: Standard NEMA 3R enclosure
with optional rodent/serpent screen.

• Provides intake exhaust air screens with (¼ x ¼) mesh

• Not available on units 1600A (480V) and above

Voltage Frequency Code
C 380 – 415 Volts 50 Hz
D 480 Volts 60 Hz
E 600 Volts 60 Hz
F 690 Volts 50 Hz

Optional Contractor Options
002 - Contactor for capacitor disconnect
012 - Contactor with control transformer
009 - Contactor with adjustable pick up and drop out
013 - Filter bypass and capacitor contactor

with control transformer

MATRIX AP SELECTION TABLES

400V 50Hz

Motor

(Ref

Filter

Only)

Amps

Rating

KW Inches Millimeters Lbs Kgs Inches Millimeters 002 009 012 013

2.2 6

3.7 8

5.5 11

7.5 14

11 21

15 27

19 34

22 44

30 52

37 66

45 83

55 103

MTE Part

Number

MAPP0006C OPEN 8.6 x 8.0 x 5.4 218 x 203 x 137 20 9 3

MAPG0006C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 66 30

MAPW0006C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 74 34

MAPP0008C OPEN 8.7 x 8.0 x 5.4 221 x 203 x 137 20 9 3

MAPG0008C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 68 31

MAPW0008C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 75 34

MAPP0011C OPEN 9.9 x 9.0 x 4.8 251 x 229 x 122 28 13 3

MAPG0011C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 75 34

MAPW0011C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 83 38

MAPP0014C OPEN 9.8 x 9.0 x 5.3 249 x 229 x 135 34 15 3

MAPG0014C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 82 37

MAPW0014C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 90 41

MAPP0021C OPEN 11.7 x 10.5 x 6.7 297 x 267 x 170 50 23 3

MAPG0021C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 98 44

MAPW0021C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 107 49

MAPP0027C OPEN 11.8 x 10.5 x 7.2 300 x 267 x 183 56 25 3

MAPG0027C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 103 47

MAPW0027C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 111 50

MAPP0034C OPEN 11.7 x 10.5 x 7.7 297 x 267 x 196 68 31 3

MAPG0034C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 115 52

MAPW0034C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 123 56

MAPP0044C OPEN 11.7 x 10.5 x 8.0 297 x 267 x 203 79 36 3

MAPG0044C NEMA 1/2 24.0 x 12.5 x 17.9 610 x 318 x 455 127 58

MAPW0044C NEMA 3R 24.0 x 12.5 x 23.0 610 x 318 x 584 134 61

MAPP0052C OPEN 14.0 x 12.0 x 9.0 356 x 305 x 229 100 45 4

MAPG0052C NEMA 1/2 33.9 x 17.8 x 20.9 861 x 452 x 531 174 79

MAPW0052C NEMA 3R 33.9 x 17.8 x 26.0 861 x 452 x 660 181 82

MAPP0066C OPEN 14.0 x 12.0 x 9.0 356 x 305 x 229 112 51 4

MAPG0066C NEMA 1/2 33.9 x 17.8 x 20.9 861 x 452 x 531 186 84

MAPW0066C NEMA 3R 33.9 x 17.8 x 26.0 861 x 452 x 660 194 88

MAPP0083C OPEN 14.0 x 12.0 x 10.9 356 x 305 x 277 139 63 4

MAPG0083C NEMA 1/2 33.9 x 17.8 x 20.9 861 x 452 x 531 212 96

MAPW0083C NEMA 3R 33.9 x 17.8 x 26.0 861 x 452 x 660 219 99

MAPP0103C OPEN 14.1 x 12.0 x 11.0 358 x 305 x 279 147 67 4

MAPG0103C NEMA 1/2 33.9 x 17.8 x 20.9 861 x 452 x 531 221 100

MAPW0103C NEMA 3R 33.9 x 17.8 x 26.0 861 x 452 x 660 228 103

Enclosure

Type

Filter Dimensions

(H x W x D)

Approx
Weight

Capacitor/Capacitor Panel Assembly

Ref

Watts

Fig

Loss

114

6 Preinstalled in cabinet

149

6 Preinstalled in cabinet

180

6 Preinstalled in cabinet

206

6 Preinstalled in cabinet

235

6 Preinstalled in cabinet

266

6 Preinstalled in cabinet

298

6 Preinstalled in cabinet

356

6 Preinstalled in cabinet

388

7 Preinstalled in cabinet

459

7 Preinstalled in cabinet

565

7 Preinstalled in cabinet

660

7 Preinstalled in cabinet

Dimensions (H x W x D)

7.5 x 3.0 191 x 76 1 2 S

7.5 x 3.0 191 x 76 1 2 S

7.5 x 3.0 191 x 76 1 2 S

8.0 x 3.9 203 x 99 1 2 S

8.0 x 3.9 203 x 76 1 2 S

8.3 x 4.6 211 x 117 1 2 S

9.1 x 4.6 231 x 117 1 2 S

9.1 x 4.6 231 x 117 1 2 S

10.6 x 4.6 269 x 117 1 2 S

10.6 x 4.6 269 x 117 1 2 S

10.6 x 4.6 269 x 117 1 2 S

10.6 x 4.6 269 x 117 1 2 S

Qty

Req’d

Available Options

Ref
Fig

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

* * *

Note: Weights and dimensions are for reference only. Please visit for detailed information.
S = Standard stock offering
* = Call for availability