How it Works
MTD
Loading...
TrimmerPlus LE720r
Operator's Manual
12 pgs1.13 Mb0

MTD TrimmerPlus LE720r Operator's Manual

OPERATO£'SMANUAL
FOR QUESTIONS, CALL 1-800-345-8746 in U.S. or
1-800-668-1238 in CANADA
www.TrimmerPlus.com
IMPORTANT MANUAL DO NOT THROW AWAY
THANK YOU
service. You will find it to be a great labor-saving device. This operator's manual provides you with easy-to-
understand operating instructions. Read the whole
manual and follow all the instructions to keep your new
outdoor power tool in top operating condition.
PRODUCT REFERENCES, ILLUSTRATIONS AND
SPECIFICATIONS All information, illustrations and specifications in this
manual are based on the latest product information
available at the time of printing. We reserve the right to
make changes at any time without notice.
Copyright ©2001 MTD SOUTHWEST INC All Rights Reserved.
TrimmerPlus® isa registered trademark of
MTD SOUTHWEST INC
SERVICE INFORMATION
Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer.
Dial:
• 1-800-345-8746 in the United States
Or
• 1-800-668-1238 in Canada to obtain the listing of
the authorized service dealer nearest you.
DO NOT RETURN THE UNIT TO THE RETAILER. NOTE: PROOF OF PURCHASE WILL BE REQUIRED
FOR WARRANTY SERVICE.
Make sure this manual iscarefully read and understood before starting or operating this equipment.
THIS PRODUCT IS COVERED BY ONE OR MORE US
PATENTS. OTHER PATENTS PENDING.
II.
Ill.
IV. V.
Rules for Safe Operation ................... 3-6
A. Important Safety Information .............. 3-4
B. Safety and International Symbols .......... 5
C. Know Your Unit ........................ 6
Operating Instructions ................... 7-8
A. Assembling the coupler ................ 7
B. Holding the Unit with Edger Add-On ...... 8
C. Adjusting Edger Cutting Depth .......... 8
D. Tips for Best Edging Results ............ 8
Maintenance and Repair Instructions ....... 9-10
A. Edger Blade Replacement .............. 9
B. Storage ............................ 10
C. Transporting ......................... 10
D. Accessories/Replacement Parts ......... 10
Specifications .......................... 11
Warranty .............................. 12
CONTENTS OFCARTON
This unit should consist of the following:
LE720r Edger Add-On Locking Rod Hanger Operator's Manual Product Registration Card
NOTE: This product has been rated for use on both gas
and electric powerheads.
Read the Operator's Manual(s) and follow all warnings and safety instructions. Failure to do
so can result in serious injury to the operator and/or bystanders.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and
understanding. The safety warnings do not by themselves eliminate any danger. The instructions or
warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
_IL AFETY ALERT SYMBOL: Indicates
danger, warning, or caution. Attention is required in order to avoid serious personal
injury. May be used in conjunction with other
symbols or pictographs.
NOTE: Advises you of information or instructions vital
to the operation or maintenance of the equipment.
I,_ ANGER: Failure to obey a safety warning
will result in serious injury to yourself or to others. Always follow the safety precautions
to reduce the risk of fire, electric shock, and personal injury.
,_ WARNING: Failure to obey a safety warning
can result in injury to yourself and others. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.
l_lb AUTION: Failure to obey a safety warning
may result in property damage or personal injury to yourself or to others. Always follow
the safety precautions to reduce the risk of fire, electric shock, and personal injury.
2
• IMPORTANT SAFETY INFORMATION •
READ ALL INSTRUCTIONS
1_, WARNING: When using the unit, the safety /
rules must be followed. For your own safety anc_ that of bystanders, please read these |
instructions before operating the unit. Please | keep the instructions safe for later use. /
BEFORE OPERATING
• Carefully read and understand the operator's manual
of the unit that powers this attachment.
• Read this operating instruction manual carefully. Be thoroughly familiar with the controls and the proper use
of the equipment. Know how to stop the unit and disengage the controls quickly.
• Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
• Never allow children to operate the equipment. Never
allow adults unfamiliar with the instructions to use the unit. Never allow adults to operate the equipment
without proper instruction.
• All guards and safety attachments must be installed
properly before operating the unit.
• Inspect the unit before use. Ensure the blade is
installed correctly and secure.
• Clear the area to be edged before each use. Remove
all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the
edging attachment.
SPECIAL SAFETY WARNINGS FOR GAS
POWERHEADS AND LAWN EDGERS
WARNING: Gasoline is highly flammable, and its vapors
can explode if ignited. Take the following precautions:
• Store fuel only in containers specifically designed and
approved for the storage of such materials.
• Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel
tank, or add fuel, when the engine is hot. Never
operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure
in the tank.
• Mix and add fuel in a clean, well-ventilated area
outdoors where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not
smoke while fueling or mixing fuel. Wipe up any spilled
fuel from the unit immediately.
• Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.
• Move the unit at least 30 feet (9.1 m) from the fueling
source and site before starting the engine. Do not smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.
• Never start or run the unit inside a closed room or
building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.
SPECIAL SAFETY WARNINGS FOR ELECTRIC POWERHEADS AND LAWN EDGERS
WARNING: To reduce the risk of electrical shock, use only extension cords approved for
,outdoor use, such as an extension cord of cord
type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A. Extension
cords are available from your local retailer. Use only round-jacketed extension cords approved
for outdoor use.
• CORD SETS: Make sure your cord set is in good condition. When using a cord set, be sure to use a
cord that is heavy enough to carry the current that your unit will draw. An undersized cord set will cause a drop in line voltage resulting in loss of power and
overheating. See the operator's manual for the unit that will power this add-on for the recommended cord size.
• Inspect all extension cords and the unit power connection periodically. Look closely for deterioration,
cuts or cracks in the insulation. Also inspect the connections for damage. Replace the cords if any
defects or damage appear.
• Prevent disconnection of the lawn edger powerhead from extension cord during operation by using a plug-
receptacle retaining strap, connector, or by making a knot as shown below:
Extension Lawn Edgorr Extension Lawn Edger
Cord Cord Cord Cord
• Avoid dangerous environments. Never operate your unit in damp or wet conditions. Moisture is a shock hazard.
• Do not use the unit in the rain. Do not use in or around water.
• Do not handle the plug or unit with wet hands or standing on any wet surfaces.
• Do not leave the unit plugged in when not in use, changing attachments or add-ons, or while being serviced.
WHILE OPERATING
• Keep bystanders, especially children and pets, at least 50 ft (15 m) away.
• Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit. Wear a face or dust mask if the operation is dusty.
• Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above shoulder level.
• Use the unit only in daylight or good artificial light.
• Use the right tool. Only use this tool for the purpose intended.
3
• Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.
• Use extreme caution when reversing or pulling the unit towards you.
• Do not overreach, take extra care when working on
steep slopes or inclines. Always keep proper footing and balance.
• Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or grips.
• Keep hands, face, and feet at a distance from all
moving parts. Do not touch or try to stop the blade when it is rotating. Do not operate without guards in
place.
• Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high speed when not in use.
• Always stop the engine/motor when operation is
delayed or when walking from one location to another.
• Stop the engine/motor for maintenance, repair, to
install or remove the blade. The unit must be stopped and the blade no longer turning to avoid injury.
• The blade may become very sharp from use. Always
wear heavy gloves when handling, removing, installing or cleaning the blade.
• If you strike or become entangled with a foreign object,
stop the engine/motor immediately and check for damage. Have any damage repaired before attempting
further operations. Do not operate unit with a bent,
cracked or dull blade. Discard blades that are bent, warped, cracked or broken.
• Stop the unit IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as necessary.
• Stop and switch the unit to off for maintenance, repair,
or for changing add-ons or other attachments.
• Keep unit clean of vegetation and other materials. They
may become lodged between the blade and gearbox or guard.
A coasting blade can cause injury while it continues to spin after the unit is stopped. Maintain proper control
of the unit until the blade has completely stopped rotating.
Use only genuine MTD replacement parts and
accessories for this unit. These are available from your authorized service dealer. Use of any non-MTD
MAINTENANCE AND STORAGE
• Allow the unit to cool before storing or transporting. Be sure to secure the unit while transporting.
• Store the unit in a locked up and dry or high and dry place to prevent unauthorized use or damage, out of the reach of children.
• Clean the blade with a hose and water. Wipe the blade with a light machine oil to prevent rust.
• Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris.
Clean after each use.
Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this unit, also loan them these instructions.
Only qualified personnel should perform any repairs or maintenance procedures that are not described
in this manual. Check shear bolts, engine mounting bolts and other
bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.
Inside a building store the machine away from ignition sources. Allow the engine to cool before storing in any enclosure.
Always refer to the Operator's Manual instructions for important details if the cultivator is to be stored for an extended period.
Do not attempt to repair the machine unless you have the proper tools, and instructions for disassembly and repair of the machine.
SAVE THESE INSTRUCTIONS
4
Loading...
+ 8 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use