MTD 41AJPS-C799 Owner’s Manual
Operator's Manual
M
Pole Saw
ATTACHMENT
Model No. 316.792460
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
• ESPANOL, P. E1
TION: Before using this
product, read this manual and
follow all safety rules and
operating instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our website" www.sears.com/craftsman
769-03569A 3/08
TABLEOFCONTENTS
RulesforSafeOperation................................. 2
Warranty............................................. 4
KnowYourUnit........................................ 5
AssemblyInstructions................................... 5
OperatingInstructions................................... 6
Maintenance&RepairInstructions......................... 7
ReplacingSawChain................................... 7
ChainLubrication...................................... 8
CleaningandStorage................................... 8
Specifications......................................... 8
PartsList........................................... E11
ServiceNumbers.............................. BackCover
Beforebeginning,locatetheunit'smodelplate.Itliststhemodeland
serialnumbersofyourunit.Refertothesampleplatebelowandcopy
theinformationforfuturereference.
Serial Number
_S/N :
Copy the model and parent part number here:
Copy the serial number here:
Model Number
-_ Parent Part Number
\MODEL: /
ITEM : /
The purpose of safety symbols is to attract your attention to possible I
dangers. The safety symbols, and their explanations, deserve your I
careful attention and understanding. The safety warnings do not by I
themselves eliminate any danger. The instructions or warnings they I
give are not substitutes for proper accident prevention measures. J
SYMBOL MEANING
SAFETY ALERT: Indicates danger, warning or caution.Attention is required in order to avoid serious personal injury.
May be used in conjunction with other symbols or pictographs.
NOTE: Advises you of information or instructions vital to the
operation or maintenance of the equipment.
DANGER: Failureto obey a safety warning will resultin serious
injury to yourself or to others.Always follow the safety precautions
to reduce the risk of fire, electricshock and personal injury.
WARNING: Failure to obey a safety warning can resultin injuw to yourself and others. Always follow the safety
precautions to reduce the risk of fire, electric shock and
personal injuw.
CAUTION: Failure to obey a safety warning may result in
property damage or personal injuw to yourself or to others.
Always follow the safety precautions to reduce the risk of
fire, electric shock and personal injury.
All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
1
Readthe Operator's Manual andfollow allwarnings and safety instructions.Failureto do so can resultinserious injuryto the operatorand/or bystanders.
FOR QUESTIONS, CALL 1-800-659-5917
• IMPORTANT SAFETY INSTRUCTIONS •
READ ALL INSTRUCTIONS BEFORE OPERATING
KICKBACK SAFETY PRECAUTIONS
WARNING: Kickback may occur when the noseortip of the
safety rules. Please read these instructions before operating
I_lk WARNING: When using the unit, you must follow the
• Carefully read and understand the operator's manual of the unit
• Read this operating instruction manual carefully. Be thoroughly
• Do not operate this unit when tired, ill, or under the influence of
• Never allow children to operate the equipment. Never allow adults
• All guards and safety attachments must be installed properly
POLE SAW OPERATING PROCEDURES
• Keep bystanders, especially children and pets, at least 50 ft (15m) away.
• Wear safety glasses or goggles that are marked as meeting ANSI
• Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do
• Use the unit only in daylight or good artificial light.
• Use the right tool. Only use this tool for the purpose intended.
• Always stop the engine when operation is delayed or when
• Use only OEM replacement parts and accessories for this unit.
the unit in order to ensure the safety of the operator and any
bystanders. Please keep these instructions for later use.
that powers this attachment.
familiar with the controls and the proper use of the equipment.
Know how to stop the unit and disengage the controls quickly.
alcohol, drugs, or medication.
unfamiliar with the instructions to use the unit. Never allow adults
to operate the equipment without proper instruction.
before operating the unit.
Z87.1-1989 standards, and ear/hearing protection when operating
this unit. Wear a face or dust mask if the operation is dusty.
not wear loose clothing, jewelw, short pants, sandals or go
barefoot. Secure hair above shoulder level.
walking from one location to another.
These are available from your authorized service dealer. Use of any
unauthorized parts or accessories could lead to serious injury to the
user or damage to the unit, and void your warranty.
• Grip trimmer firmly. Hold the pole saw/trimmer unit firmly with
• Do not let the nose of the guide bar contact a log, branch, ground
• Always cut with the engine running at full speed. Fully squeeze
• Do not over reach.
• Follow the manufacturer's sharpening and maintenance
• Use only replacement bars and chains specified by the
SAFETY WARNINGS FOR ELECTRIC POWERNEADS
guide bar touches an object, or when the wood closes in and
pinches the saw chain in the cut. Tip contact in some cases may
cause alightning-fast reverseaction, kicking the guide bar rapidly
back towards the operator.Pinchingthe saw chain along the top of
the guide bar may push the guide bar rapidly back towards the
operator. Eitherofthese reactions may cause you to lose control of
the saw,which could result in seriousinjury to the user.
Do not rely exclusively upon the safety devices built into your
saw. As a pole saw user,you should take several steps to
keep your cutting jobs free from accident or injury.
With a basic understanding of kickback, you can reduce or eliminate
the element of surprise. Sudden surprise contributes to accidents.
both hands when the motor is running. Keep one hand on the grip
and the other hand on the handle.
or other obstruction.
the throttle trigger and maintain a steady cutting speed.
instructions for the saw chain.
manufacturer or the equivalent.
WARNING: To reduce the risk of electrical shock, use
only extension cords approved for outdoor use, such as an
extension cord of cord type SW-A, SOW-A, STW-A, STOW-
A, SJW-A, SJOW-A, SJTW-W or SJTOW-A. Extension
cords are available from your local retailer. Use only round-
jacketed extension cords approved for outdoor use.
• CORD SETS: Make sure your cord set is in good condition. When
using a cord set, be sure to use a cord that is heavy enough to
carry the current that your unit will draw. An undersized cord set
will cause a drop in line voltage resulting in loss of power and
overheating. See the operator's manual for the unit that will power
this attachment for the recommended cord size.
• Inspect all extension cords and the unit power connection
periodically. Look closely for deterioration, cuts or cracks in the
insulation. Also inspect the connections for damage. Replace the
cords if any defects or damage appear.
• Prevent disconnection of the electric powerhead from extension
cord during operation by using a plug-receptacle retaining strap,
connector, or by making a knot as shown below:
Extension Powerhead Extension Powerhead
Cord Cord Cord Cord
DANGER: RISK OF CUT OR SHOCK -- Keep hands
away from blades. Keep one hand on assist handle on the
powerhead and on the loop handle of attachment when
power is on. Do not attempt to remove cut material or hold
material to be cut when blades are moving. Make sure the
switch on the power unit is off when clearing jammed
material from blades. Do not grasp the exposed cutting
blades or cutting edges of the pole saw. Wear gloves when
handling the blade. Do not operate unit with one hand.
Avoid dangerous environments. Never operate your unit in damp
or wet conditions. Moisture is a shock hazard.
• Do not use the unit in the rain. Do not use in or around water. Do
not use on wet hedges or shrubbery.
• Do not handle the plug or unit with wet hands or standing on any
wet surfaces.
• Do not leave the unit plugged in when not in use, changing
attachments or add-ons, or while being serviced.
OTHER SAFETY PRECAUTIONS
• DO NOT operate a pole saw with one hand! Serious injury to the
operator, helpers, or bystanders may result from one-handed
operation. A pole saw is intended for two-handed use.
• Do not operate a pole saw if you are fatigued.
• Do not wear loose clothing or jewelry, as they can get caught in
moving parts. Non-skid footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.
• Use safety glasses, safety footwear, snug fitting clothing,
protective gloves, and protective hearing and head gear.
• Keep the work area clean. Cluttered areas invite injuries. Do not
start cutting until you have a clear work area, secure footing, and
a planned retreat path from the falling branches.
• Stay Alert. Watch what you are doing. Use common sense. Do not
operate the pole saw when you are tired. Keep all parts of your body
away from the saw chain when the motor is operating. Before you
start the saw, make sure the saw chain is not contacting anything.
• Disconnect the pole saw when not in use, before servicing, and when
changing accessories and attachments such as saw chain and guard.
• Check damaged parts. Before further use of the pole saw, a guard or
other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly
repaired or replaced by an authorized service center, unless otherwise
indicated in this instruction manual.
• Use extreme caution when cutting small sized brush and sapling,
as slender material may catch the saw chain and be whipped
toward you or pull you off balance.
• Do not operate a pole saw in a tree unless you are specifically
trained to do so. When cutting a limb that is under tension, be
alert for spring back so that you will not be struck when the
tension in the wood fibers is released.
• Do not expose the pole saw to rain. Do not use the pole saw in
damp or wet locations.
• Donot use the pole saw in the presence of flammable liquids or gases.
• All pole saw service, other than the items listed in the operator's
manual safety and maintenance instructions, should be
performed by competent pole saw personnel. Do not attempt to
repair it yourself; there are no user serviceable parts inside.
• The pole saw will do a better and safer job when used at the rate
for which it was intended.
• Use the right tool. Cut wood only. Do not use the pole saw for
purposes for which it was not intended. For example, do not use the
pole saw for cutting plastic, masonry, or non-building materials.
• Usedevices, such as low-kickback chain, guide bar nose guards, chain
brakes and special guide bars, which reduce the risks associated with
kickback.
• There are no other replacement components for achieving
kickback protection in accordance with CSA Z62.3.
• Do not operate a pole saw that is damaged, improperly adjusted,
or not completely and securely assembled. Be sure that the saw
chain stops moving when the trigger is released.
• Do not attempt operations beyond your capacity or experience.
• Never remove, modify or make inoperative any safety device
furnished with your unit.
• This saw is intended for infrequent use by homeowner's, cottagers
and campers, and for such general applications such as clearing and
pruning. It is not intended for prolonged use. If the intended use
involves prolonged periods of operation, this may cause circulatory
problems in the user's hands due to vibration. It may be appropriate
to use a saw having an anti-vibration feature.
• Safety clothing required by your safety organizations, government
regulations, or your employer should be used; otherwise, snug fitting
clothing, safety footwear, and hand and ear protection should be worn.
• Low-kickback saw chain is chain that has met the kickback
performance requirements of ANSI B175.1-1991 and is in
accordance with CSA Z62.3. Do not use other replacement chain
unless it has met these requirements for your specific model.
• Do not use any other cutting attachment or accessories. Use only
original equipment manufacturer replacement parts and accessories,
which are designed specifically to enhance the performance and
maximize the safe operation of our products. Failure to do so may
cause poor performance and possible injury. Use only the chain and
bar supplied with this product. Do not use any other cutting
attachment. Use of such attachments will void your factory warranty
and could result in serious bodily injury.
• Never touch the chain or attempt to service the saw while the
engine is running. Make sure all moving parts have stopped.
Allow the chain to cool, as the chain can be hot.
• Check the bar and chain at frequent intervals for proper
adjustment. Make sure the bar and chain are properly tightened
and sharpened. Visually inspect for damage. Repair any damage
before restarting or operating the pole saw.
• Do not cut near electrical cables or power lines.
• Do not use the pole saw to fell a tree. Use a standard chain saw
for this application.
MAINTENANCE AND STORAGE
• Allow the unit to cool before storing or transporting. Be sure to
secure the unit while transporting.
• Always use the transport guard on the bar and chain during
transportation and storage.
• Store the unit in a locked up and dry or high and dry place to
prevent unauthorized use or damage, out of the reach of children.
• Never douse or squirt the unit with water or any other liquid. Keep
handles dry, clean and free from debris. Clean after each use.
• Keep these instructions. Refer to them often and use them to
instruct other users. If you loan someone this unit, also loan them
these instructions.
• Only qualified personnel should perform any repairs or
maintenance procedures that are not described in this manual.
SAVE THESE INSTRUCTIONS
This operatorIs manualdescribessafety and internationalsymbols and pictographs that mayappear onthis product. Read theoperatorIs manualfor complete
safety,assembly,operating and maintenanceand repairinformation.
SYMBOL MEANING SYMBOL MEANING
• SAFETY ALERT SYMBOL
AA, I Indicates danger, warning or caution. May be used in
J. conjunction with other symbols or pictographs.
• READ OPERATOR'S MANUAL
_]1 I I_ I WARNING: Read the operat0r!s manUal(s)and
follow all warnings and safety instructions. Failure to
I d° s° can result in seri0us injury t° the 0perat0r
/ and/or bystanders.
" • WEAR HEAD, EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause
severe eye injury and hearing loss. Wear eye protection
meeting ANSI Z87.1,1989 standards and ear protection
when operating this unit. Falling objects can cause
severe head injury. Wear head protection when
• operating this unit.Use a full face shield when needed.
, KEEP BYSTANDERS AWAY
WARNING: Keep all bystandersl eSpeCially children
and pets, at least 50 feet (15 m) from the operating area.
. POWER LINES CAN CAUSE SEVERE INJURY
WARNING= Donetoperate unit near POwer linesl
Contact with a power line may cause serious injury or
ii_II_II_II
damage to the unit. Maintain a clearance of at least
50 ft (15 m) between the pole saw (including any
branches it is contacting) and any electrical line.
I•GUIDE BAR
_-_ I WARNING: Contact of the guide bar tip with any object
^_ I should be avoided. Tip contact may cause the guide bar to
I moyesuddenly upward and backward, which may cause
_.._t_:_:,@ senous inju_.
I"USEBOTHHANDS I
Always use both hands while operating the chain saw.
Never use on y one hand to operate the saw.
I"HOTSURFACE
I WARNING: Do not touch a hot surface. You may
,,_;_1_, operation. They remain hot for a short time after the
%2
I get burned. These parts get extremely hot from
unit is turned off.
' CHAIN OIL ADJUSTMENT INDICATOR
The chain must be continously coated with oil to
function oroperly. Make sure to set the Oil Adjustment
@
Screw to allow a sufficient amount of oil to flow
continuously onto the chain
Use a 3!32-inch Allen wrench to adjust the Oil
Adjustment Screw.
I
CRAFTSMAN FULL WARRANTY
If this Craftsman product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears
store or other Craftsman outlet in the United States for free replacement.
This warranty applies for only 90 days if this product is ever used for commercial or rental purposes.
This warranty covers ONLY defects in materal and workmanship. Sears will NOT pay for:
• The chain saw bar and chain, wich are expendable items that can wear out from normal use within the warranty period.
• Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Chain Transport Guard
Bar Retaining
Oil Tank Cap
GuideBar
Nose
_Saw
Chain
q: Rook
Guard
Removing the Attachment or Extension Boom
damage to the unit, shut the unit off before removing or
WARNING: To avoid serious personal injury and
installing add-ons.
1. Turn the knob Convertible TM Release Button
counterclockwise to Coupler _ /
loosen (Fig. 3). , _ _€"=r
2. Press and hold the release
button (Fig. 1).
3. While firmly holding the
upper shaft housing, pull
the attachment or
extension boom out of the
coupler (Fig. 2). Guide Recess
Installing the Attachment or Fig. 1
Extension Boom
Craftsman
Convertible TM
Coupler
Extension Boom
OilAdjustment
Screw
A e%n
Hanger_
FILLING THE OIL RESERVOIR
_hb i DANGER: Failure to fill the oil reservoir will cause irreparable I
Follow the following steps to fill the oil reservoir:
1. Place the unit on a flat surface.
2. Remove the Oil Tank Cap.
3. Open the bar & chain oil bottle provided with your unit.
4. Pour oil into the reservoir until filled.
NOTE: The oil reservoir may be filled to the lip of the fill opening
_hb i WARNING: Oil constantly flows from the oil reservoir to oil I
INSTALLING/REMOVING ATTACHMENT
_lk i WARNING: Prior to operation, read and understand the Ioperator's manual for unit to be used with this attachment.
The attachment may be mounted to different power tools. The
instruction manuals for the basic power tool and the attachment
contain the information necessary for operation of the power tool
combination. Therefore, aways read BOTH instruction manuals
before using the power tool for the first time. Keep the manuals in
a safe place for future reference.
NOTE: To make installing or removing the attachment easier, place
damage to the unit. Make surethe oil reservoir is always filled.
without damaging the unit.
the chain. Check the oil level constantly so that the oil level does
not drop below half full.
the unit on the ground or on a work bench.
Screw Oil Reservoir
_lb I WARNING: Toavoid serious personal injury and damage
1. Remove the hanger or Primary Hole
2. Turn knob
3. While firmly holding the
NOTE: Aligning the release
4. Turn the knob clockwise to
5. Repeat steps 1-4 for the
The attachment should be installed with the release button in the
primary hole.
_l AUTION: Lock the release button in the primary hole
_l CAUTION: Add-ons are to be used in the primary hole
Check Flex Shaft Engagement Prior to Using
1. Start the unit.
2. Briefly engage and release the trigger.
3. Check that attachment is operating.
4. If the attachment is not operating, remove attachment and
5. Recheck operation of the attachment.
to the unit, NEVER install more than one extension boom to a
power tool.
of the shaft housing.
counterclockwise to
loosen (Fig. 3). ,,
shipping cap from the top __
attachment, push it Upper Shaft Lower Shaft
straight into the Housing Housing
Convertible TM coupler Fig.2
until the release button
snaps firmly into the
primary hole (Fig. 6).
button with the guide
recess will help
installation (Fig. 1).
tighten (Fig. 3). Knob
attachment or extension Fig. 3
boom.
and securely tighten the knob before operating this unit.
only. Using the wrong hole could lead to personal injury or
damage to the unit.
repeat steps for installing the attachment.
OPERATINGPRECAUTIONS
when operating this unit. Do not wear loose clothing or
jewelry. Wear eye and ear/hearing protection. Wear heavy
I,_ ARNING: Dress properly to reduce the risk of injury
1. Keep bystanders 50 feet (15 meters) away when operating the saw.
2. Do not use the pole saw
3. Make sure the oil tank is
4. Grip pole saw/trimmer
5. Keep finger off the trigger
6. Before starting the pole
7. Keep all parts of your
8. Do not force the chain saw
9. When cutting limbs or
10. When carrying pole saw
11. Do not cut small brush and saplings with the pole saw. Slender
12. Never stand directly under the limb you are trimming. Always
13. Never stand on a ladder or other type of unstable support while
14. Always use both hands to operate pole saw. Keep a firm, steady
I_lb ARNING: Do not use the pole saw to cut limbs larger
15. Keep other persons away from cutting end of pole saw and at a
16. Do not use the pole saw near cable, electric power or telephone
STARTING INSTRUCTIONS
long pants, boots and gloves. Wear a hard hat. Use a full
face shield when needed.
chain saw without a pole
attachment.
full and oil is lubricating
the chain prior to starting.
to cut down trees. Use a _,_ ' _ )
securely--one hand on the
grip, the other on the
handle. Fig. 4
until ready to make cut.
saw, make sure the chain
is not touching anything.
body away from the chain
when the saw is running.
while cutting. Apply light
pressure. It will do the job Fig. 5
better and safer at the rate
for which it was intended.
branches that are under
tension, use extreme
caution. Be alert for wood
springing back. When wood
tension is released, the limb
could spring back and
strike operator causing
severe injury or death. Fig. 6
from one place to another:
• hold pole at balance point
• keep guide bar and chain to the rear
matter may catch in the chain and be whipped toward you. This
could also pull you off balance.
position yourself out of the path of falling debris (Fig. 4).
using the pole saw.
pressure on the pole saw while cutting, but do not try to force
the saw through the wood.
than 4" (10 cm) in diameter.
safe distance from work area. (Fig. 5).
lines. Maintain a minimum clearance of 50 feet (15 m) from all
power lines (Fig. 6).
1. Place the pole saw on firm ground or other solid surface in an
open area.
2. Maintain good balance and secure footing.
OPERATING TIPS
WARNING: Kickback may occur when the nose or tip of
Alt
• Do not operate the pole saw while in a tree, on a ladder or any
• Do not extend your arms above shoulders when using the pole
• Seek professional help if you are facing conditions beyond your
• Trimming a tree is the process of cutting limbs from a living tree.
• Before starting unit, always check the chain lubrication and oil
NOTE: The chain must be continously coated with oil to function
To trim a limb (pruning):
2. Move two to four inches it _1[__
3. Make the third cut as
4. Make the fourth cut directly above the third cut. Cut down to
the guide bar touches an object, or when the wood closes
in and pinches the saw chain in the cut. Tip contact in
some cases may cause a lightning-fast reverse action,
kicking the guide bar rapidly back towards the operator.
Pinching the saw chain along the top of the guide bar may
3ush the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of
the saw, which could result in serious injury to the user.
Do riot rely exclusively upon the safety devices built into
your saw. As a chain saw user, you should take several
steps to keep your cutting jobs free from accident or injury.
Avoid kickback. Kickback can result in severe injury or death.
other unstable work surface, or in any awkward position. You may
lose control of the pole saw causing severe injury.
saw.
ability.
Make sure your footing is firm. Keep your feet apart. Divide your
weight evenly on both feet.
tank level.
properly. Make sure that the oil adjustment screw is set
appropriately.
WARNING: If the oil tank runs out, the oil ajustment screw
hole becomes clogged, or the chain fails to get proper
lubrication in any fashion, the chain will overheat and cause
irreversible damage to the unit and may result in severe injury.
Excessive heat from friction can lead the chain to
catastrophically fail and come off the bar while operating.
Make the first cut six inches from tree trunk on the underside of
the limb. Use the top of the guide bar to make this cut. Cut a
third of the way through Cut 4 6in Cut 2
the diameter of the limb FI \_ (15.2cm)_
(Fig. 7). i) __
Make the second cut from 5.1-10.2 cm}
farther out on the limb. _1_ / ,2:4in(
above the limb. Continue t^ _ cut 1
the cut until you cut the cut 3
limb off. close "\ _1
to the tree trunk as Fig.7
possible on underside of limb stub. Use the top of the guide bar
to make this cut. Cut a third through the diameter of stub.
meet the third cut. This will remove the limb stub.
I_ ARNING: To reduce the risk of fire and burn injuries,
Start and operate your pole saw without assistance. For specific
starting instructions, see the appropriate section of your powerhead
manual. Proper starting methods reduce the risk of injury.
start the engine at least 30 ft. (9.1 m) from the fueling spot,
outdoors only.
Loading...