Illustrated Parts M anual
Single-Stage Snow Thrower — Models 2M1, 2S1 & 2T5
Printed In USA
Model 2T5 Shown
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Form No. 769-07133
(June 13, 2011)
To The Owner
Thank you for purchasing an MTD Snow Thrower. It was carefully
engineered to provide excellent performance when properly
operated and maintained.
All information in this manual is relative to the most recent
product information available at the time of printing. Please be
aware that this Illustrated Part’s Manual may cover a range of
product specifications for various models.
Table of Contents
Shroud, Chute & Handle ......................................... 4
Drive System & Auger Assembly ............................ 6
Record Product Information
To ease in ordering replacement parts, please locate the model
plate on the equipment and record the information in the
provided area to the right. You can locate the model plate by
looking beneath the seat.
Components listed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product
specifications, designs and equipment without notice and
without incurring obligation.
Throughout this manual, all references to right (RH) and left (LH)
are observed from the operating position.
Engine Model 265-JU-11 ......................................... 8
Model NuMber
Serial NuMber
Painted Parts
When ordering painted service parts, a four digit color suffix must be added to the part number (e.g. 783-XXXXX-0637).
Please refer to the table below for current color codes:
0637 Black
0709 Dark Green (Bolens, Yard-Man)
0662 Oyster Gray (MTD Gold)
0638 Red (Yard Machines, Huskee, Troy-Bilt, MTD)
0691 Black Jack (MTD Gold, MasterCut)
0674 Yellow (Yard-Man)
0650 Metallic Red (White Outdoor)
0629 Silver Flake (MTD Platinum)
04038 Day Orange (Daedong)
04033 Flint Mica (Troy-Bilt XP)
2
This page left intentionally blank.
3
3
Shroud, Chute & Handle
20
19
21
18
18
22
11
17
13
10
5
23
15
12
9
7
10
2
4
8
3
1
5
6
16
14
11
11
4
4
Ref.
Part Number Description
1. 710-04998 Carriage Bolt, ⁄-18 x 1.00
2. 710-05348 Eye Bolt, ⁄-20
3. 712- 0406 4 Flange Lock Nut, ⁄-20
4. 720-0279 Knob Handle
5. 720- 0 4122 Wing Knob
6. 738- 0 4 419A Shoulder Screw, .375 x .148 x 1/4-20
7.
747-05327B†
747- 05490 Auger Bail
8.
749 -04703 B†
749 -04808 Upper Handle
9. 731-08347 Top Cover (Black w/o electric start)
731-08352††
731-08339††
10. 710-059 9 Hex Screw, ⁄-14 x .500
11. 710-0895 Screw, Hi-Lo:1/4-15, 0.75
12. 925-04031A Ignition Switch Assembly
13. 710-05108 Hex Washer Screw, 1/4 x .750
14. 931-07626A Chute Adapter
15. 731- 08274 Chute Ring
16. 932- 04111 Chute Adjustment Spring
17. 736 - 04576 Flat Washer, .28 x 1.5 x .066
18. 710-0451 Carriage Bolt, ⁄-18 x .750
19. 712- 04 0 63 Flange Lock Nut, ⁄-18
20. 731-04426A Upper Chute
21. 731- 0764 4 Chute Handle
22. 931-07753A Lower Chute
23.
710 -04187††
Auger Bail
Upper Handle
Top Cover (Gray)
Top Cover (Black)
Hex Washer Screw, 1/4-15 x .50
Shroud, Chute & Handle
† Model 2T5
†† Model with electric start
5
5
Drive System & Auger Assembly
29
12
12
10
15
10
35
25
33
32
6
52
5
47
2
3
31
42
43
44
41
19
13
51
27
45
7
25
34
35
20
17
18
29
37
24
22
36
13
10
28
14
10
1
10
50
26
23
10
40
30
49
8
48
46
12
39
38
16
9
21
9
11
4
6
6
Drive System & Auger Assembly
Ref.
Part Number Description
1 684-04168 Idler Pulley Assembly
2 684 -04398 Frame
3 984-04393 Auger Assembly Mount
4 929- 0071A* 3-Prong Extension Cord
5 753-06469
6 790 - 00427 Center Auger Bracket
7 710 -0134 Carriage Screw, 1/4-20 x .62
8 710-0778 Hex Screw, 1/4-20 x 1.50
9 710-0627 Hex Lock Screw, 5/16-24 x .750
10 710 -1652 Hex Washer Screw, 1/4-20 x .625
11 710-059 9 Hex Washer Screw, 1/4-20 x .500
12 710 -0 817 Hex Washer Screw, 5/16-18 x 1.250
13 710 -0895 Hex Washer Screw, 1/4-15 x .750
14 710 - 04484 Hex Washer Screw, 5/16-18 x .75
15 712- 04 0 65 Flange Lock Nut, 3/8-16
16 736 - 0371 Thrust Washer, .343 x .880 x .062
17 712-0 4 0 6 4 Flange Lock Nut, 1/4-20
18 718- 04836 Pulley Hub
19 736-3092 Washer, .265 x 1.00 x .030
20 731- 08171 Shave Plate
21 731-07737A Belt Cover
22 732- 0474 8 Extension Spring, .70 x 3.035
23 710-05183 Hex Screw, 5/16-24 x 1.25
24 738-04456 Shoulder Bolt, 5/16-24 x .496 x 2.18
25 741- 04 517 Ball Bearing, .500 x 40mm x 12mm
26 946 - 04782 Clutch Cable
Auger Replacement Kit (Inc. 2 Paddles and 12 Hex Washer Screws)
Ref.
Part Number Description
27 747-05360A Drive Cable Wire Support
28 748-023 4 Shoulder Spacer
29 749 -0 4 810 Lower Handle
30 750-04571 Shoulder Spacer, .260 x .785 x .538
31 750-04758 LH Auger Spacer
32 750 -05393 RH Auger Spacer
33 790-00444 RH Auger Plate
34 790-00445 LH Auger Plate
35 790- 00457 Bearing Cup
36 790 - 0 0 461 Idler Bracket
37 790-00 426 Cable Idler Bracket
38 726-0299 Push Cap, 1/2
39 734-04585 Wheel, 8”
734-04063A Wheel, 7”
40 750 -04432 Spacer, .525 x .775 x .835
41 747- 05513 Gas Tank Wire Support
42 751-10487A Fuel Cap
43 751 -116 48 Fuel Ta nk
44 731-076 6 4* Choke Extension Lever
45 710 - 0654A Hex Washer Screw, 3/8-16 x 1.000
46 912-0702 Flange Nut, 7/16-20
47 726- 0205 Hose Clamp
48 954-04050 Belt, .500 x 35.06
49 95 6 -0416B Pulley Half, .625 x 2.25
50 756-04443 Pulley, 1/2 x 6.00
51 726-0233 Push Nut
52 710-05058 Hex Washer Screw, 1/4-20 x .750
* Models with electric start
7
7
265-JU-11 Muffler
23
25
22
25
21
21
24
50
50
91
50
98
99
93
108 92
94
97
95
109
Ref. Part Number Description
21 710 - 0 4911 Muer Stud M8×36
21 951-10657 Muer Stud Assembly
22 951-112 85 Muer Gasket
23 712 - 04214 Nut, M8
24 951-12010 Muer Assembly
25 710 - 05002 Bolt M5×10
50 710- 04915 Bo lt M6×12
91 951 -1110 4 Covernor Spring Bracket
92 951-12016 Governor Shield
8
Ref. Part Number Description
93 951-12100 Governor Spring
94 951-10664 Throttle Linkage Spring
95 951-10665 Throttle Linkage
97 9 51-1110 6 Governor Arm
98 712-0 4212 Nut M6
99 710-0490 8 Governor Arm Bolt
108 710- 04920 Bolt M6×28
109 712- 04212 Nut M6
101
265-JU-11 Starter & Flywheel
102
103
81
80
81
82
83
Ref.
Part Number Description
50 710 -0 4915 Bolt M 6×12
80 9 51-12013 Ignition Coil Assembly
81 710 - 04919 Bolt M6×25
82 951-12416 Flywheel
83 951-10909 Fan, Cooling
84 951-10911 Starter Cup
85 712- 0 4209 Nut, Special, M14×1.5
87 951-126 44 Blower Housing
88 736-04455 Washer
100
101
84
102
50
104
50
89
88
85
50
Ref.
Part Number Description
89 710 -0 4974 Bolt M6×10
90 951-12015 Recoil Starter
100 951-10645A Startup Electromotor
101 715- 04088 Dowel Pin 8×8
102 710- 05182 Bolt M6×32
103 710- 04979 Bolt M6×18
104 951-11109 Blower Housing Shield
731- 05632 Key
50
88
90
89
88
89
9
265-JU-11 Crankcase
75
74
73
66
67
69
66
66
70
66
66
66
65
66
46
50
64
63
47
57
58
72
62
52
56
54
59
61
60
53
55
58
76
79
78
10
48
49
47
50
51
50
265-JU-11 Crankcase
Ref.
Part Number Description
46 9 51-116 8 8 Piston Ring Set
47 9 51-116 32 Piston Pin Snap Ring
48 951-11900 Piston
49 951-11901 Piston Pin
50 710 -0 4915 Bolt M 6×12
51 951 -11113 Air Shield
52 9 51-11573 Connecting Rod Assembly
53 9 51-11356 Governor Arm Shaft
54 736-04461 Washer 5.2×1.9
55 951-11902 Governor Seal
56 714 - 04074 Cotter Pin
57 9 51-11575 Camshaft Assy.
58 951 -113 69 Radial Ball Bearing, 6205
59 951-12102 Crankshaft Assembly Kit
60 951-10307 Woodru Key
61 951-115 76 Governor Gear/Shaft Assembly
62 715 -04092 Dowel Pin 7×14
63 715 - 04089 Dowel Pin 9×14
64 9 51-1137 1 Crankcase Cover Gasket
65 951-12125 Cover Comp, Left Crankcase
66 710 -04932 Bolt M8×32
67 9 51-112 8 3 Dipstick Assembly
69 951-115 7 7 O-Ring 15.8×2.5
Ref.
Part Number Description
70 9 51-1136 8 Oil Seal, 25×Φ41.25×6
72 951 -113 81 Oil Fill Tube O-Ring
73 951-11913 Oil Fill Tube Assembly
74 951-11904 Dipstick O-Ring
75 951-124 82 Dipstick Assembly
76 9 51-12650 Crankcase Kit
(Incl.55,58,70,76,79)
78 951-12514 Oil Drain Plug
79 951-113 7 0 Oil Seal 25×41.25×6
951 -1124 6 Crankcase Cover Kit
(In c l. 58 ,6 4- 67, 70)
951-12649 Crankshaft Kit
(Incl.58-60,70,79)
951-12026 Gasket Kit - External
(Incl.6,22,27-29,35)
951-12028 Gasket Kit - Complete
(Incl.6,22,27-29,35,40,
54,55,64,70,79)
951-1264 8 Short Block
(Incl.6,22,27,28,40,42,43,
46-49,52-67,70,76-79)
952Z 2 6 5-JU -11 Complete Engine
11
265-JU-11 Cylinder Head
43
41
44
45
42
42
41
20
18
18
18
16
15
14
110
6
1
2
1
1
1
13
4
17
16
10
9
8
8
5
18
19
11
10
9
7
12
11
40
43
12
265-JU-11 Cylinder Head
Ref.
Part Number Description
1 710-04968 Bolt M6×16
2 951-11054 Valve Cover
4 726- 0 4101 Breather Hose Clamp
5 731- 07059 Breather Hose
6 951 -115 6 5 Valve Cover Gasket
7 951 -118 92 Rocker Arm Assembly
8 75 1-11124 Nut, Pivot Locking
9 75 1-11123 Adjusting Nut ,Valve
10 951 -118 93 Rocker Arm
11 710-04902 Bolt, Pivot
12 951-11895 Push Rod Guide
13 951-12000 Retainer, In.Valve Spring
14 951-120 02 Adjuster, Exhaust Valve
15 951-12003 Retainer, Exhaust Valve Spring
16 951-12 0 0 4 Valve Spring
17 9 51-118 94 Intake Valve Seal
18 710-04933 Bolt M8×55
19 951-10722A Cylinder Head Assembly
(Incl .6,8-17,19,22,27,
28,40,44,45)
Ref.
Part Number Description
20 951-10292 Spark Plug/F6Rtc
40 9 51-118 9 8 Gasket, Cylinder Head
41 951-10648 Push Rod Kit
42 9 51-118 99 Ta ppet
43 715 -04090 Dowel Pin 10×16
44 951-10647A Exhaust Valve
45 951-10647A Intake Valve
110 951-11063A Valve Cover Kit
952Z 2 6 5-JU -11 Complete Engine
951-12026 Gasket Kit - External
(Incl.6,22,27-29,35)
951-12028 Gasket Kit - Complete
(Incl.6,22,27-29,35,40,
54,55,64,70,79)
951-1264 8 Short Block
(Incl.6,22,27,28,40,42,43,
46-49,52-67,70,76-79)
13
265-JU-11 Carburetor
26
26
27
28
29
30
33
31
34
39
39
33
38
35
37
36
14
265-JU-11 Carburetor
Ref.
Part Number Description
26 710 - 05101 St ud M6 ×110
27 9 51-11567 Carburetor Insulator Gasket
28 951 -115 68 Carburetor Insulator
29 951 -115 69A Carburetor Gasket
30 951-10639A Primer Assembly
31 951-12 011 Carburetor Assembly
32 9 51-11700 Fuel Hose Clamp
34 9 51-12012 Fuel Line Kit
35 9 51-11571 Carburetor Gasket Plate
36 712- 0 4213 Nut
37 951-10962 Air Cleaner Housing
38 951-10961 Air Cleaner Assembly
39 710 - 05275 Self-Tapping Bolt M4.2×16
a n/a Screw M3×5
b n/a Washer
c n/a Control Lever,Choke
d n/a Choke Shaft
e n/a Choke Plate
f n/a Throttle Shaft
g n/a Throttle Plate
h n/a Screw M3×5
i n/a Lock Washer
Ref.
Part Number Description
j n/a Idle Jet Assembly
k n/a Gasket, Throttle Plate
l n/a Idle Speed Adjusting Screw
m n/a Mixture Screw
n 951-12019 Primer Hose
o 951-11906 Hose Clamp
p n/a Carburetor Body
q n/a Float Pin
r n/a Emulsion Tube
s n/a Needle Valve
t n/a Main Jet
u n/a Needle Valve Spring
v n/a Float
w 951 -115 8 9 Fuel Bowl Gasket
x n/a Fuel Bowl
y 9 51-1134 8 Fuel Bowl Gasket
z 710- 04945 Fuel Bowl Mounting Bolt
aa 9 51-113 49 Fuel Drain Plug Gasket
ab 710 -04938 Fuel Drain Plug
951-11020A Carburetor Kit - Major
(Incl.j,k,l,q,r,s,t,u,v,w,y,aa)
15
To order replacement parts or locate your nearest service dealer call a Customer Support at (800) 800-7310.
or visit www.mtdproducts.com to find the nearest authorized dealer in your area.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019