MTD 24677L User Manual

OWNERS MANUAL

,75

POWER

ASSEMBLY OPERATION

MAINTENANCE

PARTS LIST

VACUUMS

Model Numbers

244-675-000

244-685-000

244-689-000

Important:

Read Safety Rules and Instructions Carefully

PRINTED IN U.S.A.

24677L 24687L

Thank you for purchasing an

American built product.

FORM NO. 770-3097

INDEX

Safe Operation Practices............................................. 3

Assembly Instructions .................................................. 4

Operation

Adjustments ............................................................... 9

Lubrication ................................................................. 10

....................................................................

Maintenance ........................................................... . 10-

Off-Season Storage Illustrated Parts Replacement Parts List Parts Information

................

.....................................................

..........................................

—

LIMITED WARRANTY

^ For one year from the date of oiiginal retail purchase, MTD PRODUCTS INC will either

repair or replace, at its option, fre } of charge, F.O.B. factory or authorized service firm, any

♦ ♦

♦

A been operated and maintained in accordance with the instructions furnished. This warran-

part or parts found to be defective in material or workmanship. Transportation charges for

the movement of any power equipment unit or attachment are the responsibility of the pur

chaser. Transportation charges fcr any parts submitted for replacement under this warran-

^ ty must be paid by the purchaser unless such return is requested by MTD PRODUCTS INC. This warranty will not apply to any part which has become inoperative due to misuse, ex

cessive use, accident, neglect, improper maintenance, alterations, or unless the unit has ty does not apply to the engine, motor, battery, battery chargeror component parts thereof.

Please refer to the applicable manufacturer’s warranty on these items.

...................................

.........................................

Back Cover

12, K

13, 15

^ This warranty will not apply where the unit has been used commercially. ^ Warranty service is available thro jgh your local authorized service dealer or distributor. If

you do not know the dealer or distributor in your area, please write to the Customer Service

♦

^ This warranty gives you specific legal rights. You may also have other rights which vary

Department of MTD.

The return of a complete unit will not be accepted by the factory unless prior written per

mission has been extended by MTD.

from state to state.

WARNING

( E)

TO PURCHASERS

OF INTERNAI COMBUSTION ENGINE EQUIPPED

MACHINERY OR C EVICES IN THE STATE OF CALIFORNIA

The equipment which you have just purch ased does not have a spark arrester. If this equipment is used on any forest covered land, brush covered lar d, or grass covered unimproved land in the State of California, before using on such land, the California law requires that a spark arrester be provided. In addition, spark arrester is required by law to be in effect ve working order. The spark arrester must be attached to the exhaust system and comply with Section 1442 of the California Public Resources Code.

IMPORTANT

^ It is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this

'manual in a safe place for future reference and for ordering replacement parts.

This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper

fuel and engine oil recommendations.

SAFE OPERATION PRACTICES FOR POWER VACUUMS

. Read this operating and service instructing manual

carefully. Be thoroughly familiar with the controls and proper use of the power vacuum.

?. Never allow children to operate this power

vaccum.

i. Keep the area of operation clear of all persons,

particularly small children and pets.

I. Check fuel before starting engine. Do not fill fuel

tank indoors, when engine is running, or while engine is hot. Wipe off any spilled fuel before starting engine.

Do not change engine governor settings.

Do not put hands near rotating parts for any

reason.

If the power vacuum should start to vibrate abnormally, stop the engine and check immedi ately for the cause. Vibration is generally a warning of trouble.

J. Before cleaning, repairing or inspecting, make

certain all moving parts have come to a complete stop. Disconnect spark plug wire and keep wire away from plug to prevent accidental starting. Also keep throttle control lever in the stop position.

3. If the power vacuum should become blocked with debris at any point, shut engine off and wait until the impeller comes to a complete stop before attempting to remove the obstruction. Disconnect spark plug wire to prevent accidental

starting.

10. Check all bolts for tightness at frequent periods.

11. Never store this power vacuum with fuel in the tank. Allow engine to cool before storing in any enclosure.

12. Keep bag and equipment free of debris when not in use.

13. Never operate this power vacuum unless air duct and vacuum bag are properly affixed in their place. Large zippered end of bag must be closed when operating to prevent objects from being blown out.

14. Never empty vacuum bag when engine is running.

15. Never change inlet nozzle or auxiliary hose attach ment when engine is running.

16. The manufacturer recommends that the operator wear safety glasses or some other suitable eye protection when operating this machine.

17. Check the vacuum bag frequently for wear and replace when necessary.

18. Never operate as a leaf blower unless impeller guard and guard assembly are properly affixed in their place.

19. Exercise caution whenever operating as a leaf blower. Do Not allow discharge to be pointed in the direction of persons.

FIGURE 1

ASSEMBLY

INSTRUCTIONS

CONTENTS OF HARDWARE PACK (See Figure 1.)

(1) Clutch Grip Assembly*

(1) Hair Pin Cotter* (1) Clevis Pin* (1) Extension Spring* (1) Lock Nut 1/4-20 Thread*

(3) Hand Knobs

(3) Belleville Washers (1) Heavy Flat Washer (4) Hex Bolts 1/4-20x 1.75" Long (4) Hex Lock Nuts 1/4-20 Thread (2) Stud Pins (2) Push-on Speed Nuts (1) Hex Jam Nut 1/4-20 Thread* (Not Shown)

LOOSE PARTS IN CARTON (See Figure 2.)

FIGURE 2.

M N 0 P Q R S

*Self-Propelled Models Only.

TOW BAR KIT - Standard with push models.Optional

(See figure 3.) with self-propelled models.

T (2) Tow Bar Halves (Not Shown)

U (2) Hex Bolts 5/16-18 X 1.00" Long V (4) Shoulder Spacers W (2) Hex Nut 5/16-18 Thread

X (1) Truss Machine Screw 1/4-20 X .75" Long Y (1) Lock Washer 1/4" I.D. Z (1) Hex Nut 1/4-20 Thread AA (1) Shoulder Bolt AB (2) Belleville Washers 3/8" I.D. AC (1) Hex Jam Lock Nut 3/8-16 Thread /

Bag

(1)

Nozzle

(1)

Upper Handle

(1)

Air Duct Assembly

(1)

Clutch Rod*

(1)

Directional Discharge Assembly

(1)

Impeller Guard

(1)

FIGURES.

FIGURE 4.

UPPER HANDLE (O)-

BELLEVILLE WASHER (G)

1. Place nozzle (N) in position on front of housing so that it rests in flanges. Secure with one hand

knob (F) and belleville washer (G). See figure 4.

■

FIGURE 5.

LOCK NUT

STUD PIN (K)

,.‘r/ UPPER

2. Place the upper handle (0) in position over lower handle. Fasten with four hex bolts (I) and lock nuts (J) provided. See figure 5. Two 7/16" wrenches are required.

3. Place the stud pins (K) in holes in upper handle (head of pins go to the inside of handle). Secure

pins with push-on speed nuts (L) by holding speed nut with box wrench and tapping pin with hammer. See figure 6.

' HANDLE

FIGURE 6.

+ 11 hidden pages