MTD 217-310-000 User Manual
$1.00
CHAIN DRIVE
TILLER
IMPORTANT: Read Safety Rules and Instructions Carefully ^
Thank you for purchasing an American-built product.
Model Number
217-310-000
FORM NO. 770-5248B
INDEX
Safe Operation Practices
Assembly Instructions
Operation................................................................ 10
How to Use Your Tiller............................................11
Adjustments........................................................ ..12
Lubrication...............................................................13
Maintenance........................................... . .13
Off-Season Storage............................................... 14
Trouble Shooting Chart
Repair Parts
Parts Information..................................... .Back Cover
..................................................
...........
..............................................
...........................................
3
.'.16-19
4
15
Dear Customer,
So often throughout the year we are all In a
rush to meet our daily obligations.
However, we at MTD Products Inc are tak
ing a quick moment out to say. .
“Thank you for your business.”
Sincerely,
MTD PRODUCTS INC
INSTRUCTIONS GIVEN WITH THIS SYM
BOL ARE FOR PERSONAL SAFETY. BE
À
SURE TO FOLLOW THEM.
Г
♦
♦
♦
♦
♦
♦
♦
♦
Ф
Ф
♦
Ф
♦
♦
LIMITED WARRANTY
For one year from the date of original retail purchase, MTD PRODUCTS INC will either
repair or replace, at its option, free o1 charge, F.O.B. factory or authorized service firm, any
part or parts found to be defective in material or workmanship. Transportation charges for
the movement of any power equipment unit or attachment are the responsibility of the pur
chaser. Transportation charges for any parts submitted for replacement under this warran
ty must be paid by the purchaser unlnss such return is requested by MTD PRODUCTS INC.
This warranty will not apply to any part which has become inoperative due to misuse, ex
cessive use, accident, neglect, improper maintenance, alterations, or unless the unit has
been operated and maintained in acc ordance with the instructions furnished. This warran
ty does not apply to the engine, motcr, battery, battery chargeror component parts thereof.
Please refer to the applicable manulacturer’s warranty on these items.
This warranty will not apply where t ^e unit has been used commercially.
Warranty service is available through your local authorized service dealer or distributor. If
you do not know the dealer or distrib jtor in your area, please write to the Customer Service
Department of MTD.
The return of a complete unit will ne t be accepted by the factory unless prior written per
mission has been extended by MTD.
This warranty gives you specific lecal rights. You may also have other rights which vary
from state to state.
Ф
♦
♦
♦
♦
Ф
♦
t
♦
♦
♦
Ф
♦
♦
V
WARNING: This unit is equipped with an intern i\ combustion engine and should not be used on or near any unim
proved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with
a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained
in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code).
Other states may have similar laws. Federal Isws apply on federal lands. A spark arrester muffler is available
at your nearest engine authorized service cer ter.
Ac WARNING \
To reduce the potential for any injury, comply with the foliowing safety instructions. Faiiure to comply with
the instructions may resuit in personai injury.
SAFE OPERATION PRACTICES FOR TILLERS
1. It is suggested that this manual be read in its en
tirety before attempting to assemble or operate this
unit. Keep this manual in a safe place for future
and regular reference and for ordering replace
ment parts.
2. Your tiller is a precision piece of power equipment,
not a plaything. Therefore, exercise extreme cau
tion at all times.
3. Read this Owner’s Manual carefully. Be thoroughly
familiar with the controls and the proper use of the
equipment.
4. Never allow children to operate a power tiller. Only
persons well acquainted with these rules of safe
operation should be allowed to use your tiller.
5. No one should operate this unit while intoxicated
or while taking medication that impairs the senses
or reactions.
6. Keep the area of operation clear of all persons, par
ticularly small children and pets.
14. Do not walk in front of the tiller while the engine
is running.
15. Check the fuel before starting the engine. Gasoline
is an extremely flammable fuel. Do not fill gasoline
tank indoors, while the engine is running, or while
the engine is still hot. Replace gasoline cap secure
ly, and wipe off any spilled gasoline before start
ing the engine as it may cause a fire or explosion.
16. Do not run the engine while indoors. Exhaust
gases are deadly poisonous.
17. Be careful not to touch the muffler after the engine
has been running. It is hot.
18. Do not change the engine governor settings or
overspeed the engine. Excessive engine speeds
are dangerous.
19. Before any maintenance work is performed or ad
justments are made, remove the spark plug wire
and ground it on the engine block for added safety.
7. Do not operate equipment when barefoot or wear
ing open sandals. Always wear substan
tial footwear.
8. Do not wear loose fitting clothing that could get
caught on the tiller.
9. Do not start the engine unless the shift lever is in
the neutral (N) position.
10. Do not stand in front of the tiller while starting the
engine.
11. Do not place feet and hands on or near the tines
when starting the engine or while the engine is
running.
12. Never attempt to make a wheel or depth bar ad
justment while the engine is running.
13. Do not leave the tiller unattended with the engine
running.
20. Use caution when tilling near buildings and fences.
Rotating tines can cause damage or injury.
21. Before attempting to remove rocks, bricks and
other objects from tines, stop the engine and be
sure the tines have stopped completely. Discon
nect the spark plug wire and ground to prevent ac
cidental starting.
22. Check the tine and engine mounting bolts at fre
quent intervals for proper tightness.
23. Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
24. Never store the equipment with gasoline in the tank
inside of a building where fumes may reach an
open flame or spark. Allow the engine to cool
before storing in any enclosure.
NOTE
Reference to left or right side of the
tiller is determined from behind the
unit in the operating position.
FIGURE 2.
ASSEMBLY INSTRUCTIONS
NOTE
This unit is shipped WITHOUT GAS
OLINE or OIL. After assembly, see
separate engine manual for proper fuel
and engine oil recommendations.
Tools Required:
(2) Va" Wrenches
(2) 7/16" Wrenches
(1) %" Wrench
(1) Adjustable Wrench
(1) Phillips Screwdriver
-Contents of Hardware Pack: (See Figure 1)
A (4) Carriage Bolts 5/16-18 x 1%" Long
B (10) Lock Washers 5/16" I.D.
(10) Hex Nuts 5/16-18 Thread
C
(6) Hex Bolts 5/16-18 x W Long
D
(1) Clevis Pin Va" x 2Va" Long
E
(2) Hairpin Cotters
F
(1) Clutch Cable Support Bracket
G
(2) Cable Ties
H
(1) Flat Washer
(1) Hex Washer Head Self-Tapping Screw
Va" Long
(1) Clevis Pin 3/8" X 2Va" Long
K
(2) Shoulder Bolts (Axles)
L
(2) Belleville Washers
M
(2) Lock Washers Va" I.D.
N
(2) Hex Nuts Va-20 Thread
O
(2) Grips (Not Shown)
P
(2) Hex Bolt V4-20 x 5/8" Long
Q
(2) Lock Washers V4" I.D.
R
(2) Hex Nuts V4-20 Thread
S
(1) Phillips Head Self-Tapping Screw Va" Long
T
(Not Shown)
-Loose Parts in Carton: (See Figure 2)
U
V
w
X
Y
z
AA
AB
AC
AD
Handle Braces (Right & Left Hand)
(2)
Depth Bar
(1)
(1) Wheel Yoke Assembly
(1) Right Hand Tine Assembly
Left Hand Tine Assembly
(1)
Right Hand Handle
(1)
Left Hand Handle
(1)
Handle Panel
(1)
Wheels
(2)
(1) Tine Shield Extension (Not Shown)
1. Remove the tiller, all loose parts and literature from
the carton before discarding carton.
2. Extend the throttle control and place on the floor.
Be careful not to bend or kink control wire.
-3. The tailpiece is partially assembled. Pivot the
tailpiece upward until the holes line up with the rear
frame rails. See figure 3.
FIGURE 4.
Tailpiece
4. Secure the tailpiece to the rear frame rails with two
hex bolts (D), lock washers (B) and hex nutx (C).
■See figure 4. Tighten all four hex bolts and nuts
securely. Two V2" wrenches are required.
5. Assemble wheels (AC) to wheel yoke (W) with
shoulder bolts (L), belleville washers (M) (cupped
side of washer is against the wheel yoke), lock
—washers (N) and hex nuts (O) as shown in figure
5. A 3/4" wrench and an adjustable wrench is re
quired.
FIGURE 5.
6.--Place the end of the wheel yoke up through the
rectangular hole in the tailpiece. Secure with clevis
-----
pin (K) and hairpin cotter (F). See figure 6.
FIGURE 7.
7. Remove the clevis pin and hairpin cotter from the
— inner tine assemblies as shown in figure 7. Place
the right and left hand tine assemblies in position
on tine shaft. Secure with clevis pins and hairpin
cotters.
■i^NOTE
Be certain the tine assemblies are
assembled on the tine shaft so that
3
the sharp edge of the tines enter the
soil first. See figure 7.
Tine
Shield
Extension
(AD)
Left Hand
Handle (AA).
FIGURE 8.
Lock Washer (B) Hex Nut (C)
/Lock Washers (R)
Hex Bolts (Q)
Hex Nuts (S)
8. Attach the tine shield extension (AD) to the tine
shield and frame on the right side of the unit as
— shown in figure 8. Secure with hex bolts (Q), lock
washers (R) and hex nuts (S). Tighten securely.
9. The left handle has a clutch grip already assem
bled to it. Assemble the left and right hand handles
(AA and Z) to the rear tiller frame as shown in figure
8. Secure with hex bolts (D), lock washers (B) and
hex nuts (C), finger tight only (do not tighten).
Hex Bolt (D)v
FIGURE 9.
©
High
Position Low
Position
Handle
Braces (U)
10.--Attach the right and left hand braces (U) to the
tailpiece. The braces have two holes to provide
handle height adjustment Select hole for either
high or low position. Secure to tailpiece with hex
bolts (D), lock washers (B) and hex nuts (C), finger
------
tight only (do not tighten). See figure 9.
Loading...