MTD 19A70020 Owner’s Manual

OPER roR's
UAL
Twin Rear Bagger =Model No. 19A70020OEM
MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136=0019
PrintedIn USA FORMNO.769-06866
January18,2011
ToTheOwner
ThankYou
1
performance when properly operated and maintained. Please read this entire manual prior to operating the equipment.
It instructs you how to safely and easily set up, operate and maintain this attachment. Please be sure that you, and any other persons who will operate the machine, carefully follow the
recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this
manual frequently to familiarize yourself with the attachment, its features and operation. Please be aware that this Operator's
Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated
in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs and
equipment without notice and without incurring obligation.
Tableof Contents
Safe Operation Practices ........................................ 3
Carton Contents & Hardware Packs ...................... 6
Assembly & Installation .......................................... 8
If you have any problems or questions concerning this attachment, phone your local authorized MTD service dealer
or contact us directly. MTD's Customer Support telephone numbers, website address and mailing address can be found on this page. We want to ensure your complete satisfaction at all
times. Throughout this manual, all references to fight and left side of the
machine are observed from the operating position
Operation ................................................................ 13
Parts List .................................................................. 16
Warranty .................................................. Back Cover
Record Productinformation
Before setting up and operating your new equipment, please locate the model plate on the equipment and record the information in the provided area to the right. You can locate the
model plate by looking at the topside of the bagger cover. This information will be necessary, should you seek technical support via our web site, Customer Support Department, or with a local
authorized service dealer.
MODEL NUMBER
DNDNDNDNDND
SERIAL NUMBER
ND[3D[3D[3D[3DD
CustomerSupport
Please do NOT retum the machine to the retailer or dealer without first contacting our Customer Support Department.
If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this machine, you can seek help from the experts. Choose from the options below:
0 Visit us on the web at www.mtdproducts.com
0 Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 0 Write us at MTD LLC RO. Box 361131 Cleveland, OH 44136-0019
ImportantSafeOperationPractices
WARNING! This symbol points out important safety instructions which, if not followed,
could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply
with these instructions may result in personal injury. When you see this symbol. HEED ITS WARNING!
DANGER! This attachment was built to be used according to the safe operation practices in
this manual. Carelessness or error on the part of the operator can result in serious injury.
Mowers are capable of amputating hands and feet and throwing objects. Failure to observe
the following safety instructions as well as the instructions provided with your mower, could
result in serious injury or death.
2
General Operation
1. Read, understand, and follow all instructions on your equipment and in their manuals before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.
2. To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the mower while it is in operation. Stop machine if anyone
enters the area.
3. Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys, and other foreign objects which could be picked up and thrown by the blade(s). Thrown objects can cause serious personal injury.
4. Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.
5. Do not operate the mower without the discharge cover or entire grass catcher in its proper place. A missing or damaged discharge cover or grass bag attachment component may result in thrown objects or blade contact injuries.
6. Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate
hands and feet.
7. Shut off mower's engine and wait for blades to come to a complete stop before unclogging mower's discharge opening or bagger parts.
8. Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed. Be aware that a grass catcher attachment can affect the handling characteristics of your mower.
9. Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a complete stop before opening
bagger attachment's top cover, removing grass catcher, emptying grass, unclogging chute, removing any grass or debris, or making any adjustments.
10. Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set parking
brake, stop engine and remove key before dismounting.
11. Your machine is designed to cut normal residential grass of a height no more than 10". Do not attempt to mow through
unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Dry grass or leaves may contact the engine exhaust and/ or build up on the mower deck presenting a potential fire
hazard.
12. If situations occur which are not covered in this manual, use care and good judgment. Contact your customer service
representative for assistance.
SlopeOperation
Slopes are a major factor related to loss of control and tip-over accidents which can result in severe injury or death. Attachments
can also affect the stability of the machine. All slopes require extra caution.
For your safety, use the slope gauge included as part of this manual to estimate the angle of slopes before operating this
machine on a sloped or hilly area. If the slope is greater than 10 degrees as shown on the slope gauge, do not operate the mower with the grass bag attachment installed on that area or serious injury could result.
Do:
1. Mow up and down slopes, not across. Exercise extreme caution when changing direction on slopes.
2. Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.
3. Useslowspeed.Choosealowenoughspeedsettingso thatyouwillnothavetostoporshiftwhileontheslope. Tiresmaylosetractiononslopeseventhoughthebrakes
arefunctioningproperly.Alwayskeepmachineingear whengoingdownslopestotakeadvantageofengine brakingaction.
4. Followthemanufacturer'srecommendationsforwheel weightsorcounterweightstoimprovestability.
5. Keepallmovementontheslopesslowandgradual.Do notmakesuddenchangesinspeedordirection.Rapid engagementorbrakingcouldcausethefrontofthe machinetoliftandrapidlyflipoverbackwardswhichcould causeseriousinjury.
6. Avoidstartingorstoppingonaslope.Iftireslosetraction, disengagetheblade(s)andproceedslowlystraightdown theslope.
DoNot:
1. Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.
2. Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over ifa wheel is over the edge
of a cliff, ditch, or if an edge caves in.
3. Do not try to stabilize the machine by putting your foot on the ground.
4. Do not use a grass catcher on steep slopes.
5. Do not mow on wet grass. Reduced traction could cause sliding.
GeneralService
1. Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent
unintended starting.
2. Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
3. Never tamper with your mower's safety interlock system or other safety devices. Check their proper operation
regularly.
4. Never attempt to make adjustments or repairs while the mower's engine is running.
5. Grass catcher components and the discharge cover are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately with original equipment manufacturer's (O.E.M.) parts only, listed in this manual. Use of parts which do not meet the original equipment specifications may lead to improper
performance and compromise safety!
6. Maintain or replace safety and instruction labels, as necessary.
SafetySymbols
This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.
READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to
assemble and operate
STOP
%iF
follow the warnings and instructions in this manual and on the machine.
I i_ WARNING! Your Responsibility--Restrict the use of this power machine to persons who read, understand and
Turn off the engine before opening the bagger cover.
SAVETHESEINSTRU(TIONS!
%
J
4 I SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES
Sight andhold
this levelwith a vertical tree...
or a corner of a building...
! | |
| |
| |
|
d alongd " '
Otted_.._iine_(represents
_ or afence post
|
,
I--
Z
0
o
z
, a 10oslope)
I
|
I |
¢N
z
£
In
10 °
Usethis page as a guide to determine slopes where you [nay safely operate your mower with a grassbag attachment installed.
WARNING! Do not operate your lawn mower with a bagger attachment on inclines with a slope in excess of 10 degrees (a rise of approximately 1-% feet every 10 feet). A riding mower with a bagger attachment could overturn and cause serious
injury. Operate riding mowers up and down slopes, never across the face of slopes.
ContentsofCarton
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Fig. 3-1. Three hardware packs are included in this kit and are detailed on the following page.
Hitch Bracket Kit (3 Pcs.& Hardware Pack) Chute Tube Extension
Discharge Chute Elbow Grass Catcher Cover Screen
Grass Catcher Cover
Two Grass Bag Assemblies
Upper Chute Tube Self-Adhesive Foam Strip
Upper Chute Support Hinge Cover Pin Vertical Support Bracket Bag Support Assembly Bagger Counter-Weight Bracket Kit (not needed for this installation) Two Hardwa re Packs (Detailed& illustrated on nextpage)
3
This bracket kit not needed for installation on this unit.
J
Figure3-1
6
I
Loading...
+ 14 hidden pages