MSTRONIC MIT-904P, MIT-908P, MIT-912P User Manual

USER’S MANUAL

MIT-904P/908P/912P

Multiport Passive PoE Injector

MSTRONIC CO., LTD.

User’s Manual MIT-904P/908P/912P

MSTRONIC CO., LTD.

2

1. Introduction

The MIT-904P/908P/912P is a 4/8/12 ports passive PoE injector, 1U rack mount

upgradeable from 4 to 12 ports, in a 10/100/1000BaseTx Ethernet network, over

TIA/EIA-568 Category 5/5e/6 cabling. It is power on all 4 pairs of the cabling.

Features

4/8/12 port Passive PoE Injector (No detection)

Support 4/8/12 ports full load, max. 300W/600W/900W

AC input (100-240 VAC, 50/60 Hz)

Independent overload and short-circuit protection per module

Individual power status indicator

Supports IEEE 802.3af/at/bt non-standard device

Standard 19” or 23” rack mountable

DIY upgrade from 4 port to 12 port available

2. Hardware Description

Front Panel

Figure 2-1. The Front panel of MSE MIT-904P/908P/912P

The Front Panel of the MSE MIT-904P/908P/912P consists of 4/8/12 x RJ-45 Ethernet

ports (data), 4/8/12 x RJ-45 PoE ports (data + power), 4/8/12 x LED port indicators,

each LED indicates the individual port power status.