MS Sedco 59-W, 59-P, 59, 59-H, 59-HSS Technical Data Manual

59 Series

4 1/2" Square

Push Plate Switches

Product Name

59 Series

4 1/2" Square Push Plate Switches

• Fits single or 2-gang Electrical
Box or MS SEDCO #1015
Surface Mount Box

• Special Finishes: US3, US4,

PRESS

TO OPERATE

DOOR

#59-H (Blue Powder Coat with White Paint

Filled Legend)

PRESS

TO

OPERATE

DOOR

#59-P (Stainless Steel with Black Paint

Filled Legend)

Manufacturer

MS SEDCO

8701 Castle Park Drive
Indianapolis, IN 46256
Phone: [phone]
www.mssedco.com

Product Description

BASIC USE
The 59 Series push plate switches
are designed to provide reliable
activation of any automatic door.

The 59 Series features 4" square

US10, US10B, US32

• Radio Control Versions
Available

ClearPath

ClearPath™ Radio Control Switches
with HDRC™ solve problems caused
by interference and stray signals —
and are guaranteed to work where
others won't.

™

DIMENSIONS

See Reverse

face plates in either stainless

APPLICABLE STANDARDS
American National Standards
Institute (ANSI) - Building Hard­ware Manufacturers Association
(BHMA) - ANSI/BHMA A156.10 &
A156.19.

APPROVALS
UL (Micro-Switch)

PRESS

TO OPERATE

DOOR

#59-HSS (Stainless Steel with Blue Paint

Filled Legend)

steel or blue powder coated alumi­num with etched and paint filled
legends. A 4 1/2" square formed
stainless steel back plate elimi­nates possible wall damage from
standard use.

Designed as a universal switch,
the 59 Series fit single-gang or
2-gang electrical boxes with no
adapters necessary. A surface
mount box is also available.

Installation

The 59 Series Switch is easy to
install.

#59-W (Blue Powder Coat with White

Paint Filled Legend)

Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws, durable
finishes and the most reliable
microswitch in the industry.

Hardwired Applications:

Mount to a standard single or
2-gang electrical box at the
desired wall location. Remove the
face plate from the switch assem-

Technical Data

• 4" x 4" All Active Face Plate

• 4 1/2" x 4 1/2" Formed

#59-WSS (Stainless Steel with Blue Paint

Filled Legend)

NOT SHOWN

#59-Plain (Stainless Steel with No

Legend)

8701 Castle Park Drive  Indianapolis, Indiana 46256  Telephone: [phone]  Fax: [phone]

Stainless Steel Back Plate

• UL Listed "Cherry Switch", SPDT,
Mom., 15 Amp @ 125V AC

• Rubber “Bellows” Increases
Weather Protection (included)

www.mssedco.com  [e-mail]

bly. Connect the necessary signal
wires to the appropriate switch
contacts (COM & N.O. are stan­dard). Secure the switch assem­bly to the electrical box and
reattach the face plate.

22006

59 Series

4 1/2" Square
Push Plate Switches

Installation (continued)

Wireless Applications:

Mount a ClearPath™ transmitter
and surface mounting box in the
desired location. Program the
transmitter and connect the wire
leads to the COM and N.O. switch
contacts. Attach the wall switch
assembly to the surface box and
reattach the face plate.

repaired free of charge. After
three years, the unit will be
repaired for a nominal service
charge. Limited warranty is in

lieu of all other warranties,
expressed or implied, including
any implied warrantability of
merchantability. No representa­tive or person is authorized to
assume for MS SEDCO any other
liability in connection with the

Custom Applications:

The 59 Series Switches can be
customized in a variety of ways.
Virtually any legend can be placed
on the face plate as well as
custom colors or finishes. Contact
the factory for pricing.

sale of our products. All warran­ties are limited to the duration of
this written limited warranty. In
no event shall MS SEDCO be
liable for any special, incidental,
consequential or other damage
arising from any unclaimed
breach of warranty as to its prod-

Availability & Cost

ucts or services.

AVAILABILITY
Available internationally from
manufacturer's authorized dist­ributors; contact MS SEDCO for
the location of nearest distributor.

Maintenance

MS SEDCO recommends that all
maintenance and adjustments be
performed by an AAADM Certified
Technician.

COST
Cost information on MS SEDCO
products is available from the

DIMENSIONS

manufacturer's authorized
distributors.

4 1/2"

Technical Services

MS SEDCO's staff of factory
trained sales and service person­nel offer design assistance and
technical support. Local distribu­tors are also available to assist in
selecting appropriate devices for
specific uses and to provide onsite
installation.

BELLOWS DIAGRAM

COM

INCLUDED

Rubber Bellows

Insert rubber bellows
over spring on
exterior switches for
weather tight fit!

N.C.

N.O.

MICRO-SWITCH

5/8"

Warranty

MS SEDCO, Inc. guarantees this
product to be free from manufac­turing defects for three years from
date of installation. Unless MS
SEDCO is notified of the date of
installation, the warranty will be in

4 1/2"

4"

effect for three years from the
date of shipment from our factory.
If, during the first three years, this
product fails to operate and has
not been tampered with or
abused, the unit can be returned
prepaid to the factory and be

8701 Castle Park Drive  Indianapolis, Indiana 46256  Telephone: [phone]  Fax: [phone]

www.mssedco.com  [e-mail]

3/4"

22006