MS Sedco 216TX, 216TX-TG Technical Data Manual
216TX Series
Infrared Wireless Touchless
Door Activator Switches
Technical Data
• ADA Compliant Hands-Free,
Germ-Free Operation
• Microprocessor-Controlled
Active Infrared
• Digital Circuit Design
• Wireless Transmitter Features
ClearPath™ Technology With
216TX-TG
Three User-selectable Frequency
Settings (300 MHz, 390 MHz,
Product Name
216TX Series
Infrared Wireless Touchless Door
Activator Switches
Contact Information
MS SEDCO
7898 Zionsville Road
Indianapolis, IN 46268
Phone: (317) 842-2545
www.mssedco.com
HDRC™)
• FCC Licenses For All Three
Frequency Settings
• SignalLock™ Guarantees Signal
Transmission When Presence
Is Detected
• Integrated Signal Radiating
Antenna Boosts Signal Strength
• Compatible With Most 300 MHz,
390 MHz, and ClearPath™
CP/TX Receivers
Product Description
BASIC USE
The 216TX Series wireless
SPECIFICATIONS
Detection Method
touchless switches are infrared
devices designed to activate full
and low energy automatic doors.
Avg. Radiated Power
The built-in wireless transmitter
offers the added benefit of easy
Input Voltage
installation, requiring no wiring
to the switch.
The hands free operation of the
Response Time
216TX makes them ideal for ADA
applications and locations where
Operating Distance
hygiene is important such as
restrooms, health care facilities
Unit Size
or cleanrooms. The 216TX is
microprocessor controlled,
Mounting Options
allowing for superior operation in
a smaller unit.
Face Plate Sizes
The 216TX has a 4 1/2”
stainless steel faceplate and
comes installed in the 1020 box
Face Plate Finishes
Standard: Brushed Stainless Steel
complete with a transmitter.
7898 Zionsville Road Indianapolis, Indiana 46268 Telephone: (317) 842-2545 Fax: (317) 849-3387
www.mssedco.com
Amplitude modulated, coded
carrier active infrared
Less than 5 mW/cm²
216: 3.3 Volts DC Coin Cell
Battery (CR2032)
TX: 9 Volt DC Battery
<300 mSeconds
±1 - 5 inches
4 3/4”W x 4 3/4”H x 2 1/4”D
Includes wall mount box
4 1/2” square
For Special Finishes & Legends,
Contact Factory
custsvc@mssedco.com
Temperature
-4°F to 140°F (-20°C to 60°C)
APPLICABLE STANDARDS
American National Standards
Institute (ANSI) - Building
Hardware Manufacturers
Association (BHMA) - ANSI/BHMA
A156.10 & A156.19.
Installation
Refer to MS SEDCO Installation
Instructions.
Availability & Cost
AVAILABILITY
Available internationally from
manufacturer's authorized
distributors; contact MS SEDCO
for the location of the nearest
distributor.
COST
Cost information on MS SEDCO
products is available from the
manufacturer's authorized
distributors.
Warranty
A one year warranty is available
from the manufacturer covering
defects in materials and
workmanship. Contact MS SEDCO
for details.
Maintenance
MS SEDCO recommends that all
maintenance and adjustments be
performed by an AAADM Certified
Technician.
Technical Services
MS SEDCO's staff of factory
trained sales and service
personnel offer design assistance
and technical support. Local
distributors are also available to
assist in selecting app
ropriate
devices for specific uses and to
provide onsite installation
072017
216TX Series
Infrared Wireless Touchless
Door Activator Switches
Maintenance AVAILABLE FACE PLATES
MS SEDCO recommends that all
maintenance and adjustments be
performed by an AAADM Certified
Technician.
Technical Services
MS SEDCO's staff of factory
trained sales and service
personnel offer design assistance
and technical support. Local
distributors are also available to
assist in selecting appropriate
devices for specific uses and to
provide onsite installation
TOUCH FREE
216TX-TG
O
T
O
E
V
A
W
•
T
O
U
E
C
L
H
GERM FREE
P
E
N
•
S
S
TOUCHLESS
216TX-HT
DIMENSIONS
TOUCHLESS
216TX
SWITCH
FRAME
BACK PLATE
1/4-20 SCREW
216TX-WT
TOUCH FREE • GERM FREE
216TX-HG
LOCK LIP
TX PCB
BATTERY
FRAME
1/4-20 SCREW
BACK PLATE
7898 Zionsville Road Indianapolis, Indiana 46268 Telephone: (317) 842-2545 Fax: (317) 849-3387
www.mssedco.com
custsvc@mssedco.com
072017
Loading...