Page 1
81-856
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes, MSR® Footprint
ELIXIR™ 4
Assembly Instructions
PREPARE FOR SETUP
1. Spread tent out on top of footprint and stake out
four corners tightly.
2. Assemble poles.
ATTACH RIDGE POLE
1. Insert red ridge pole into grommets above doors, making sure
ridge pole rests on top of main poles.
ASSEMBLE TENT FRAME
1. Insert each red pole tip of main poles into grommets
on the red stake loops.
2. Insert each gray pole tip of main poles into grommets
on the gray stake loops.
3. Attach color-coded clips to like-color pole along entire
length of frame assembly.
ATTACH RAINFLY
1. Lay rainfly over tent. Attach rainfly’s midpoint grommets
to ridge pole.
2. Stretch out vestibules until taut and stake down, making sure
seams align with frame.
USE TIPS: All tents require staking; unsecured tents are susceptible
to wind damage. In some conditions, additional stakes and cord
may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete
care and use instructions, refer to the Owner’s Manual (available
at www.msrgear.com/Elixir4).
M OUNTAIN S AFETY R ESEARCH
© 2018 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
®
1-800-531-9531
1-206-505-9500
Loading...