Page 1
81-242-1
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes, MSR® Footprint
ELIXIR™ 2
Assembly Instructions
PREPARE FOR SETUP
1. Spread tent out and stake out four corners tightly.
2. Assemble poles.
ATTACH RIDGE POLE
1. Insert red ridge pole into red grommets above doors, making
sure ridge pole rests on top of both red and gray main poles.
ASSEMBLE TENT
1. Insert each red pole tip of main poles into grommets on the stake
loops with red webbing.
2. Insert each gray pole tip of main poles into grommets on the
stake loops with gray webbing.
3. Attach color-coded clips to like-color pole along entire length of
frame assembly.
ATTACH RAINFLY
1. Lay rainfly over tent. Attach rainfly’s midpoint grommets to
ridge pole.
2. Stretch out vestibules until taut and stake down, making sure
seams align with frame.
USE TIPS: All tents require staking; unsecured tents are susceptible
to wind damage. In some conditions, additional stakes and cord
may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete care
and use instructions, refer to the Owner’s Manual (available at
www.msrgear.com/Elixir2).
M OUNTAIN S AFETY R ESEARCH
© 2018 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
®
1-800-531-9531
1-206-505-9500
Loading...